From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
The BIOS sometimes likes to enable pipes w/o any ports, at least on
older machines. Currently we fail to assign anything sensible to
crtc->hwmode.crtc_clock which leads to complaints from the vblank code.
Deal with active pipes w/o ports and assign something sensible to
crtc_clock.
Gets rid of rest of these on my gen4:
[drm:drm_calc_timestamping_constants [drm]] *ERROR* crtc 24: Can't calculate constants, dotclock = 0!
[drm:i915_get_vblank_timestamp] crtc 1 is disabled
Cc: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/intel_display.c | 31 ++++++++++++++++++++++---------
1 file changed, 22 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index b4229ce..32e9f91 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -14857,13 +14857,22 @@ intel_check_plane_mapping(struct intel_crtc *crtc)
return true;
}
+static bool intel_crtc_has_encoders(struct intel_crtc *crtc)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct intel_encoder *encoder;
+
+ for_each_encoder_on_crtc(dev, &crtc->base, encoder)
+ return true;
+
+ return false;
+}
+
static void intel_sanitize_crtc(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_encoder *encoder;
u32 reg;
- bool enable;
/* Clear any frame start delays used for debugging left by the BIOS */
reg = PIPECONF(crtc->config->cpu_transcoder);
@@ -14907,16 +14916,11 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
/* Adjust the state of the output pipe according to whether we
* have active connectors/encoders. */
- enable = false;
- for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
- enable = true;
- break;
- }
-
- if (!enable)
+ if (!intel_crtc_has_encoders(crtc))
intel_crtc_disable_noatomic(&crtc->base);
if (crtc->active != crtc->base.state->active) {
+ struct intel_encoder *encoder;
/* This can happen either due to bugs in the get_hw_state
* functions or because of calls to intel_crtc_disable_noatomic,
@@ -15180,6 +15184,15 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
}
for_each_intel_crtc(dev, crtc) {
+ /* in case the pipe is active w/o any ports */
+ if (crtc->active && !intel_crtc_has_encoders(crtc)) {
+ crtc->config->base.adjusted_mode.crtc_clock =
+ crtc->config->port_clock;
+ if (crtc->config->pixel_multiplier)
+ crtc->config->base.adjusted_mode.crtc_clock /=
+ crtc->config->pixel_multiplier;
+ }
+
crtc->base.hwmode = crtc->config->base.adjusted_mode;
}
}
--
2.4.6
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
