From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> The BIOS maybe leave the DSI PLL enabled even if the port is disabled. The PLL doesn't seem to like being reconfigured while it's enabled so make sure it's disabled before doing that. The better fix would be to expose all PLLs independently of their ports so that we could disable any unused ones during the sanitize phase. But this seems like an OK short term solution. Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> --- drivers/gpu/drm/i915/intel_dsi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index 92bb252..07c4bb3 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -907,6 +907,7 @@ static void intel_dsi_pre_pll_enable(struct intel_encoder *encoder) intel_dsi_prepare(encoder); + vlv_disable_dsi_pll(encoder); vlv_enable_dsi_pll(encoder); } -- 2.3.6 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/intel-gfx
