Re: [PATCH v6 1/6] drm/i915/gen8: Add infrastructure to initialize WA batch buffers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jun 19, 2015 at 06:50:36PM +0100, Chris Wilson wrote:
> On Fri, Jun 19, 2015 at 06:37:10PM +0100, Arun Siluvery wrote:
> > Some of the WA are to be applied during context save but before restore and
> > some at the end of context save/restore but before executing the instructions
> > in the ring, WA batch buffers are created for this purpose and these WA cannot
> > be applied using normal means. Each context has two registers to load the
> > offsets of these batch buffers. If they are non-zero, HW understands that it
> > need to execute these batches.
> > 
> > v1: In this version two separate ring_buffer objects were used to load WA
> > instructions for indirect and per context batch buffers and they were part
> > of every context.
> > 
> > v2: Chris suggested to include additional page in context and use it to load
> > these WA instead of creating separate objects. This will simplify lot of things
> > as we need not explicity pin/unpin them. Thomas Daniel further pointed that GuC
> > is planning to use a similar setup to share data between GuC and driver and
> > WA batch buffers can probably share that page. However after discussions with
> > Dave who is implementing GuC changes, he suggested to use an independent page
> > for the reasons - GuC area might grow and these WA are initialized only once and
> > are not changed afterwards so we can share them share across all contexts.
> > 
> > The page is updated with WA during render ring init. This has an advantage of
> > not adding more special cases to default_context.
> > 
> > We don't know upfront the number of WA we will applying using these batch buffers.
> > For this reason the size was fixed earlier but it is not a good idea. To fix this,
> > the functions that load instructions are modified to report the no of commands
> > inserted and the size is now calculated after the batch is updated. A macro is
> > introduced to add commands to these batch buffers which also checks for overflow
> > and returns error.
> > We have a full page dedicated for these WA so that should be sufficient for
> > good number of WA, anything more means we have major issues.
> > The list for Gen8 is small, same for Gen9 also, maybe few more gets added
> > going forward but not close to filling entire page. Chris suggested a two-pass
> > approach but we agreed to go with single page setup as it is a one-off routine
> > and simpler code wins.
> > 
> > One additional option is offset field which is helpful if we would like to
> > have multiple batches at different offsets within the page and select them
> > based on some criteria. This is not a requirement at this point but could
> > help in future (Dave).
> > 
> > Chris provided some helpful macros and suggestions which further simplified
> > the code, they will also help in reducing code duplication when WA for
> > other Gen are added. Add detailed comments explaining restrictions.
> > 
> > (Many thanks to Chris, Dave and Thomas for their reviews and inputs)
> > 
> > Cc: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
> > Cc: Dave Gordon <david.s.gordon@xxxxxxxxx>
> > Signed-off-by: Rafael Barbalho <rafael.barbalho@xxxxxxxxx>
> > Signed-off-by: Arun Siluvery <arun.siluvery@xxxxxxxxxxxxxxx>
> 
> Sigh, after all that, I found one minor thing, but nevertheless
> Reviewed-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
> 
> > +#define wa_ctx_emit(batch, cmd) {	\
> > +		if (WARN_ON(index >= (PAGE_SIZE / sizeof(uint32_t)))) {	\
> > +			return -ENOSPC;					\
> > +		}							\
> > +		batch[index++] = (cmd);					\
> > +	}
> 
> We should have wrapped this in do { } while(0) - think of all those
> trialing semicolons we have in the code! Fortunately we haven't used
> this in a if (foo) wa_ctx_emit(bar); else wa_ctx_emit(baz); yet.

Uh yes, this is a critical one. Arun, can you please do a follow-up patch
to wrap your macro in a do {} while(0) like Chris suggested? I'll apply
the paches meanwhile.

Thanks, Daniel
-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux