From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Actually read the HPLLCC register insted of assuming it's 0. Fix the
HPLLCC bit definitions and all the missing ones from the 852GME spec.
852GME, 854 and 855 all seem to match the same HPLLC encoding even
though only some of the values are valid is some of the platforms.
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
v2: Rebased to the latest
v3: Rebased to the latest
Reviewed-by: Mika Kahola <mika.kahola@xxxxxxxxx>
Author: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/i915_reg.h | 11 ++++++++---
drivers/gpu/drm/i915/intel_display.c | 15 ++++++++++++---
2 files changed, 20 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 84af255..6625fb3 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -50,12 +50,17 @@
/* PCI config space */
-#define HPLLCC 0xc0 /* 855 only */
-#define GC_CLOCK_CONTROL_MASK (0xf << 0)
+#define HPLLCC 0xc0 /* 85x only */
+#define GC_CLOCK_CONTROL_MASK (0x7 << 0)
#define GC_CLOCK_133_200 (0 << 0)
#define GC_CLOCK_100_200 (1 << 0)
#define GC_CLOCK_100_133 (2 << 0)
-#define GC_CLOCK_166_250 (3 << 0)
+#define GC_CLOCK_133_266 (3 << 0)
+#define GC_CLOCK_133_200_2 (4 << 0)
+#define GC_CLOCK_133_266_2 (5 << 0)
+#define GC_CLOCK_166_266 (6 << 0)
+#define GC_CLOCK_166_250 (7 << 0)
+
#define GCFGC2 0xda
#define GCFGC 0xf0 /* 915+ only */
#define GC_LOW_FREQUENCY_ENABLE (1 << 7)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index c97b496..64debfb 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -6627,20 +6627,29 @@ static int i865_get_display_clock_speed(struct drm_device *dev)
return 266667;
}
-static int i855_get_display_clock_speed(struct drm_device *dev)
+static int i85x_get_display_clock_speed(struct drm_device *dev)
{
u16 hpllcc = 0;
+
+ pci_bus_read_config_word(dev->pdev->bus,
+ PCI_DEVFN(0, 3), HPLLCC, &hpllcc);
+
/* Assume that the hardware is in the high speed state. This
* should be the default.
*/
switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
case GC_CLOCK_133_200:
+ case GC_CLOCK_133_200_2:
case GC_CLOCK_100_200:
return 200000;
case GC_CLOCK_166_250:
return 250000;
case GC_CLOCK_100_133:
return 133333;
+ case GC_CLOCK_133_266:
+ case GC_CLOCK_133_266_2:
+ case GC_CLOCK_166_266:
+ return 266667;
}
/* Shouldn't happen */
@@ -14199,8 +14208,8 @@ static void intel_init_display(struct drm_device *dev)
i865_get_display_clock_speed;
else if (IS_I85X(dev))
dev_priv->display.get_display_clock_speed =
- i855_get_display_clock_speed;
- else /* 852, 830 */
+ i85x_get_display_clock_speed;
+ else /* 830 */
dev_priv->display.get_display_clock_speed =
i830_get_display_clock_speed;
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
