Re: [PATCH 13/14] drm/i915: skylake primary plane scaling using shared scalers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Sonika,
I have rebased 13/14 and 14/14 of scaler series on top of 90/270
and did some refactoring to reduce function size. 
Previous versions are already reviewed and Matt gave r-b
for those changes.
Can you review v5 changes and give r-b or ack for them?
You can see below (v5) list of changes triggered by 90/270.


-Chandra

> -----Original Message-----
> From: Konduru, Chandra
> Sent: Wednesday, April 15, 2015 3:15 PM
> To: intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> Cc: Konduru, Chandra; Jindal, Sonika; Roper, Matthew D; Vetter, Daniel;
> Conselvan De Oliveira, Ander
> Subject: [PATCH 13/14] drm/i915: skylake primary plane scaling using shared
> scalers
> 
> This patch enables skylake primary plane scaling using shared
> scalers atomic desgin.
> 
> v2:
> -use single copy of scaler limits (Matt)
> 
> v3:
> -move detach_scalers to crtc commit path (Matt)
> -use values in plane_state->src as regular integers (me)
> 
> v4:
> -changes to align with updated scaler structures (Matt, me)
> -keep plane src rect in 16.16 format (Matt, Daniel)
> 
> v5:
> -Rebased on top of 90/270 rotation changes (me)
> -Fixed an issue introduced by 90/270 changes where plane programming
>  is using drm_plane->state rect instead of intel_plane->state rect.
>  This change also required for scaling to work properly. (me)
> -With 90/270, updated limits to cover both portrait and landscape usages (me)
> -Refactored skylake_update_primary_plane to reduce its size (Daniel)
>  Added helper functions for refactoring are comprehended enough to be
>  used for skylake_update_plane (for sprite) too. One stop towards
>  having single function for all planes.
> 
> Signed-off-by: Chandra Konduru <chandra.konduru@xxxxxxxxx>
> Reviewed-by: Matt Roper <matthew.d.roper@xxxxxxxxx>
> Testcase: kms_plane_scaling
> ---
>  drivers/gpu/drm/i915/intel_atomic.c  |    5 +-
>  drivers/gpu/drm/i915/intel_display.c |  261 +++++++++++++++++++++++++------
> ---
>  drivers/gpu/drm/i915/intel_drv.h     |    8 +-
>  drivers/gpu/drm/i915/intel_sprite.c  |    9 ++
>  4 files changed, 213 insertions(+), 70 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_atomic.c
> b/drivers/gpu/drm/i915/intel_atomic.c
> index 3c4b7cd..cb6d5f2 100644
> --- a/drivers/gpu/drm/i915/intel_atomic.c
> +++ b/drivers/gpu/drm/i915/intel_atomic.c
> @@ -169,7 +169,7 @@ int intel_atomic_commit(struct drm_device *dev,
>  		plane->state->state = NULL;
>  	}
> 
> -	/* swap crtc_state */
> +	/* swap crtc_scaler_state */
>  	for (i = 0; i < dev->mode_config.num_crtc; i++) {
>  		struct drm_crtc *crtc = state->crtcs[i];
>  		if (!crtc) {
> @@ -178,6 +178,9 @@ int intel_atomic_commit(struct drm_device *dev,
> 
>  		to_intel_crtc(crtc)->config->scaler_state =
>  			to_intel_crtc_state(state->crtc_states[i])->scaler_state;
> +
> +		if (INTEL_INFO(dev)->gen >= 9)
> +			skl_detach_scalers(to_intel_crtc(crtc));
>  	}
> 
>  	drm_atomic_helper_commit_planes(dev, state);
> diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> index 5f7a40f..7f3ae8e 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -2960,126 +2960,199 @@ void skl_detach_scalers(struct intel_crtc
> *intel_crtc)
>  	}
>  }
> 
> -static void skylake_update_primary_plane(struct drm_crtc *crtc,
> -					 struct drm_framebuffer *fb,
> -					 int x, int y)
> +u32 skl_plane_ctl_format(uint32_t pixel_format)
>  {
> -	struct drm_device *dev = crtc->dev;
> -	struct drm_i915_private *dev_priv = dev->dev_private;
> -	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> -	struct drm_i915_gem_object *obj;
> -	int pipe = intel_crtc->pipe;
> -	u32 plane_ctl, stride_div, stride;
> -	u32 tile_height, plane_offset, plane_size;
> -	unsigned int rotation;
> -	int x_offset, y_offset;
> -	unsigned long surf_addr;
> -	struct drm_plane *plane;
> -
> -	if (!intel_crtc->primary_enabled) {
> -		I915_WRITE(PLANE_CTL(pipe, 0), 0);
> -		I915_WRITE(PLANE_SURF(pipe, 0), 0);
> -		POSTING_READ(PLANE_CTL(pipe, 0));
> -		return;
> -	}
> -
> -	plane_ctl = PLANE_CTL_ENABLE |
> -		    PLANE_CTL_PIPE_GAMMA_ENABLE |
> -		    PLANE_CTL_PIPE_CSC_ENABLE;
> -
> -	switch (fb->pixel_format) {
> +	u32 plane_ctl_format = 0;
> +	switch (pixel_format) {
>  	case DRM_FORMAT_RGB565:
> -		plane_ctl |= PLANE_CTL_FORMAT_RGB_565;
> -		break;
> -	case DRM_FORMAT_XRGB8888:
> -		plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
> -		break;
> -	case DRM_FORMAT_ARGB8888:
> -		plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
> -		plane_ctl |= PLANE_CTL_ALPHA_SW_PREMULTIPLY;
> +		plane_ctl_format = PLANE_CTL_FORMAT_RGB_565;
>  		break;
>  	case DRM_FORMAT_XBGR8888:
> -		plane_ctl |= PLANE_CTL_ORDER_RGBX;
> -		plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
> +		plane_ctl_format = PLANE_CTL_FORMAT_XRGB_8888 |
> PLANE_CTL_ORDER_RGBX;
>  		break;
> +	case DRM_FORMAT_XRGB8888:
> +		plane_ctl_format = PLANE_CTL_FORMAT_XRGB_8888;
> +		break;
> +	/*
> +	 * XXX: For ARBG/ABGR formats we default to expecting scanout buffers
> +	 * to be already pre-multiplied. We need to add a knob (or a different
> +	 * DRM_FORMAT) for user-space to configure that.
> +	 */
>  	case DRM_FORMAT_ABGR8888:
> -		plane_ctl |= PLANE_CTL_ORDER_RGBX;
> -		plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
> -		plane_ctl |= PLANE_CTL_ALPHA_SW_PREMULTIPLY;
> +		plane_ctl_format = PLANE_CTL_FORMAT_XRGB_8888 |
> PLANE_CTL_ORDER_RGBX |
> +			PLANE_CTL_ALPHA_SW_PREMULTIPLY;
> +		break;
> +	case DRM_FORMAT_ARGB8888:
> +		plane_ctl_format = PLANE_CTL_FORMAT_XRGB_8888 |
> +			PLANE_CTL_ALPHA_SW_PREMULTIPLY;
>  		break;
>  	case DRM_FORMAT_XRGB2101010:
> -		plane_ctl |= PLANE_CTL_FORMAT_XRGB_2101010;
> +		plane_ctl_format = PLANE_CTL_FORMAT_XRGB_2101010;
>  		break;
>  	case DRM_FORMAT_XBGR2101010:
> -		plane_ctl |= PLANE_CTL_ORDER_RGBX;
> -		plane_ctl |= PLANE_CTL_FORMAT_XRGB_2101010;
> +		plane_ctl_format = PLANE_CTL_ORDER_RGBX |
> PLANE_CTL_FORMAT_XRGB_2101010;
> +		break;
> +	case DRM_FORMAT_YUYV:
> +		plane_ctl_format = PLANE_CTL_FORMAT_YUV422 |
> PLANE_CTL_YUV422_YUYV;
> +		break;
> +	case DRM_FORMAT_YVYU:
> +		plane_ctl_format = PLANE_CTL_FORMAT_YUV422 |
> PLANE_CTL_YUV422_YVYU;
> +		break;
> +	case DRM_FORMAT_UYVY:
> +		plane_ctl_format = PLANE_CTL_FORMAT_YUV422 |
> PLANE_CTL_YUV422_UYVY;
> +		break;
> +	case DRM_FORMAT_VYUY:
> +		plane_ctl_format = PLANE_CTL_FORMAT_YUV422 |
> PLANE_CTL_YUV422_VYUY;
>  		break;
>  	default:
>  		BUG();
>  	}
> +	return plane_ctl_format;
> +}
> 
> -	switch (fb->modifier[0]) {
> +u32 skl_plane_ctl_tiling(uint64_t fb_modifier)
> +{
> +	u32 plane_ctl_tiling = 0;
> +	switch (fb_modifier) {
>  	case DRM_FORMAT_MOD_NONE:
>  		break;
>  	case I915_FORMAT_MOD_X_TILED:
> -		plane_ctl |= PLANE_CTL_TILED_X;
> +		plane_ctl_tiling = PLANE_CTL_TILED_X;
>  		break;
>  	case I915_FORMAT_MOD_Y_TILED:
> -		plane_ctl |= PLANE_CTL_TILED_Y;
> +		plane_ctl_tiling = PLANE_CTL_TILED_Y;
>  		break;
>  	case I915_FORMAT_MOD_Yf_TILED:
> -		plane_ctl |= PLANE_CTL_TILED_YF;
> +		plane_ctl_tiling = PLANE_CTL_TILED_YF;
>  		break;
>  	default:
> -		MISSING_CASE(fb->modifier[0]);
> +		MISSING_CASE(fb_modifier);
>  	}
> +	return plane_ctl_tiling;
> +}
> 
> -	plane_ctl |= PLANE_CTL_PLANE_GAMMA_DISABLE;
> -
> -	plane = crtc->primary;
> -	rotation = plane->state->rotation;
> +u32 skl_plane_ctl_rotation(unsigned int rotation)
> +{
> +	u32 plane_ctl_rotation = 0;
>  	switch (rotation) {
> +	case BIT(DRM_ROTATE_0):
> +		break;
>  	case BIT(DRM_ROTATE_90):
> -		plane_ctl |= PLANE_CTL_ROTATE_90;
> +		plane_ctl_rotation = PLANE_CTL_ROTATE_90;
>  		break;
> -
>  	case BIT(DRM_ROTATE_180):
> -		plane_ctl |= PLANE_CTL_ROTATE_180;
> +		plane_ctl_rotation = PLANE_CTL_ROTATE_180;
>  		break;
> -
>  	case BIT(DRM_ROTATE_270):
> -		plane_ctl |= PLANE_CTL_ROTATE_270;
> +		plane_ctl_rotation = PLANE_CTL_ROTATE_270;
>  		break;
> +	default:
> +		MISSING_CASE(rotation);
>  	}
> 
> +	return plane_ctl_rotation;
> +}
> +
> +static void skylake_update_primary_plane(struct drm_crtc *crtc,
> +					 struct drm_framebuffer *fb,
> +					 int x, int y)
> +{
> +	struct drm_device *dev = crtc->dev;
> +	struct drm_i915_private *dev_priv = dev->dev_private;
> +	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> +	struct drm_i915_gem_object *obj;
> +	int pipe = intel_crtc->pipe;
> +	u32 plane_ctl, stride_div, stride;
> +	u32 tile_height, plane_offset, plane_size;
> +	unsigned int rotation;
> +	int x_offset, y_offset;
> +	unsigned long surf_addr;
> +	struct drm_plane *plane;
> +	struct intel_crtc_state *crtc_state = intel_crtc->config;
> +	struct intel_plane_state *plane_state;
> +	int src_x = 0, src_y = 0, src_w = 0, src_h = 0;
> +	int dst_x = 0, dst_y = 0, dst_w = 0, dst_h = 0;
> +	int scaler_id = -1;
> +
> +	plane = crtc->primary;
> +	plane_state = plane ? to_intel_plane_state(crtc->primary->state) :
> NULL;
> +
> +	if (!intel_crtc->primary_enabled) {
> +		I915_WRITE(PLANE_CTL(pipe, 0), 0);
> +		I915_WRITE(PLANE_SURF(pipe, 0), 0);
> +		POSTING_READ(PLANE_CTL(pipe, 0));
> +		return;
> +	}
> +
> +	plane_ctl = PLANE_CTL_ENABLE |
> +		    PLANE_CTL_PIPE_GAMMA_ENABLE |
> +		    PLANE_CTL_PIPE_CSC_ENABLE;
> +
> +	plane_ctl |= skl_plane_ctl_format(fb->pixel_format);
> +	plane_ctl |= skl_plane_ctl_tiling(fb->modifier[0]);
> +	plane_ctl |= PLANE_CTL_PLANE_GAMMA_DISABLE;
> +
> +	rotation = plane->state->rotation;
> +	plane_ctl |= skl_plane_ctl_rotation(rotation);
> +
>  	obj = intel_fb_obj(fb);
>  	stride_div = intel_fb_stride_alignment(dev, fb->modifier[0],
>  					       fb->pixel_format);
>  	surf_addr = intel_plane_obj_offset(to_intel_plane(plane), obj);
> 
> +	if (plane_state && drm_rect_width(&plane_state->src)) {
> +		scaler_id = plane_state->scaler_id;
> +		src_x = plane_state->src.x1 >> 16;
> +		src_y = plane_state->src.y1 >> 16;
> +		src_w = drm_rect_width(&plane_state->src) >> 16;
> +		src_h = drm_rect_height(&plane_state->src) >> 16;
> +		dst_x = plane_state->dst.x1;
> +		dst_y = plane_state->dst.y1;
> +		dst_w = drm_rect_width(&plane_state->dst);
> +		dst_h = drm_rect_height(&plane_state->dst);
> +
> +		WARN_ON(x != src_x || y != src_y);
> +	} else {
> +		src_w = intel_crtc->config->pipe_src_w;
> +		src_h = intel_crtc->config->pipe_src_h;
> +	}
> +
>  	if (intel_rotation_90_or_270(rotation)) {
>  		/* stride = Surface height in tiles */
>  		tile_height = intel_tile_height(dev, fb->bits_per_pixel,
>  						fb->modifier[0]);
>  		stride = DIV_ROUND_UP(fb->height, tile_height);
> -		x_offset = stride * tile_height - y - (plane->state->src_h >> 16);
> +		x_offset = stride * tile_height - y - src_h;
>  		y_offset = x;
> -		plane_size = ((plane->state->src_w >> 16) - 1) << 16 |
> -					((plane->state->src_h >> 16) - 1);
> +		plane_size = (src_w - 1) << 16 | (src_h - 1);
>  	} else {
>  		stride = fb->pitches[0] / stride_div;
>  		x_offset = x;
>  		y_offset = y;
> -		plane_size = ((plane->state->src_h >> 16) - 1) << 16 |
> -			((plane->state->src_w >> 16) - 1);
> +		plane_size = (src_h - 1) << 16 | (src_w - 1);
>  	}
>  	plane_offset = y_offset << 16 | x_offset;
> 
>  	I915_WRITE(PLANE_CTL(pipe, 0), plane_ctl);
> -	I915_WRITE(PLANE_POS(pipe, 0), 0);
>  	I915_WRITE(PLANE_OFFSET(pipe, 0), plane_offset);
>  	I915_WRITE(PLANE_SIZE(pipe, 0), plane_size);
>  	I915_WRITE(PLANE_STRIDE(pipe, 0), stride);
> +
> +	if (scaler_id >= 0) {
> +		uint32_t ps_ctrl = 0;
> +
> +		WARN_ON(!dst_w || !dst_h);
> +		ps_ctrl = PS_SCALER_EN | PS_PLANE_SEL(0) |
> +			crtc_state->scaler_state.scalers[scaler_id].mode;
> +		I915_WRITE(SKL_PS_CTRL(pipe, scaler_id), ps_ctrl);
> +		I915_WRITE(SKL_PS_PWR_GATE(pipe, scaler_id), 0);
> +		I915_WRITE(SKL_PS_WIN_POS(pipe, scaler_id), (dst_x << 16) |
> dst_y);
> +		I915_WRITE(SKL_PS_WIN_SZ(pipe, scaler_id), (dst_w << 16) |
> dst_h);
> +		I915_WRITE(PLANE_POS(pipe, 0), 0);
> +	} else {
> +		I915_WRITE(PLANE_POS(pipe, 0), (dst_y << 16) | dst_x);
> +	}
> +
>  	I915_WRITE(PLANE_SURF(pipe, 0), surf_addr);
> 
>  	POSTING_READ(PLANE_SURF(pipe, 0));
> @@ -4338,6 +4411,7 @@ skl_update_scaler_users(
>  	int *scaler_id;
>  	struct drm_framebuffer *fb;
>  	struct intel_crtc_scaler_state *scaler_state;
> +	unsigned int rotation;
> 
>  	if (!intel_crtc || !crtc_state)
>  		return 0;
> @@ -4353,6 +4427,7 @@ skl_update_scaler_users(
>  		dst_w = drm_rect_width(&plane_state->dst);
>  		dst_h = drm_rect_height(&plane_state->dst);
>  		scaler_id = &plane_state->scaler_id;
> +		rotation = plane_state->base.rotation;
>  	} else {
>  		struct drm_display_mode *adjusted_mode =
>  			&crtc_state->base.adjusted_mode;
> @@ -4361,8 +4436,12 @@ skl_update_scaler_users(
>  		dst_w = adjusted_mode->hdisplay;
>  		dst_h = adjusted_mode->vdisplay;
>  		scaler_id = &scaler_state->scaler_id;
> +		rotation = DRM_ROTATE_0;
>  	}
> -	need_scaling = (src_w != dst_w || src_h != dst_h);
> +
> +	need_scaling = intel_rotation_90_or_270(rotation) ?
> +		(src_h != dst_w || src_w != dst_h):
> +		(src_w != dst_w || src_h != dst_h);
> 
>  	/*
>  	 * if plane is being disabled or scaler is no more required or force detach
> @@ -12805,6 +12884,36 @@ intel_cleanup_plane_fb(struct drm_plane *plane,
>  	}
>  }
> 
> +int
> +skl_max_scale(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state)
> +{
> +	int max_scale;
> +	struct drm_device *dev;
> +	struct drm_i915_private *dev_priv;
> +	int crtc_clock, cdclk;
> +
> +	if (!intel_crtc || !crtc_state)
> +		return DRM_PLANE_HELPER_NO_SCALING;
> +
> +	dev = intel_crtc->base.dev;
> +	dev_priv = dev->dev_private;
> +	crtc_clock = crtc_state->base.adjusted_mode.crtc_clock;
> +	cdclk = dev_priv->display.get_display_clock_speed(dev);
> +
> +	if (!crtc_clock || !cdclk)
> +		return DRM_PLANE_HELPER_NO_SCALING;
> +
> +	/*
> +	 * skl max scale is lower of:
> +	 *    close to 3 but not 3, -1 is for that purpose
> +	 *            or
> +	 *    cdclk/crtc_clock
> +	 */
> +	max_scale = min((1 << 16) * 3 - 1, (1 << 8) * ((cdclk << 8) / crtc_clock));
> +
> +	return max_scale;
> +}
> +
>  static int
>  intel_check_primary_plane(struct drm_plane *plane,
>  			  struct intel_plane_state *state)
> @@ -12813,23 +12922,31 @@ intel_check_primary_plane(struct drm_plane
> *plane,
>  	struct drm_i915_private *dev_priv = dev->dev_private;
>  	struct drm_crtc *crtc = state->base.crtc;
>  	struct intel_crtc *intel_crtc;
> +	struct intel_crtc_state *crtc_state;
>  	struct drm_framebuffer *fb = state->base.fb;
>  	struct drm_rect *dest = &state->dst;
>  	struct drm_rect *src = &state->src;
>  	const struct drm_rect *clip = &state->clip;
>  	bool can_position = false;
> +	int max_scale = DRM_PLANE_HELPER_NO_SCALING;
> +	int min_scale = DRM_PLANE_HELPER_NO_SCALING;
>  	int ret;
> 
>  	crtc = crtc ? crtc : plane->crtc;
>  	intel_crtc = to_intel_crtc(crtc);
> +	crtc_state = state->base.state ?
> +		intel_atomic_get_crtc_state(state->base.state, intel_crtc) :
> NULL;
> 
> -	if (INTEL_INFO(dev)->gen >= 9)
> +	if (INTEL_INFO(dev)->gen >= 9) {
> +		min_scale = 1;
> +		max_scale = skl_max_scale(intel_crtc, crtc_state);
>  		can_position = true;
> +	}
> 
>  	ret = drm_plane_helper_check_update(plane, crtc, fb,
>  					    src, dest, clip,
> -					    DRM_PLANE_HELPER_NO_SCALING,
> -					    DRM_PLANE_HELPER_NO_SCALING,
> +					    min_scale,
> +					    max_scale,
>  					    can_position, true,
>  					    &state->visible);
>  	if (ret)
> @@ -12874,6 +12991,13 @@ intel_check_primary_plane(struct drm_plane
> *plane,
>  			intel_crtc->atomic.update_wm = true;
>  	}
> 
> +	if (INTEL_INFO(dev)->gen >= 9) {
> +		ret = skl_update_scaler_users(intel_crtc, crtc_state,
> +			to_intel_plane(plane), state, 0);
> +		if (ret)
> +			return ret;
> +	}
> +
>  	return 0;
>  }
> 
> @@ -13053,6 +13177,9 @@ static struct drm_plane
> *intel_primary_plane_create(struct drm_device *dev,
> 
>  	primary->can_scale = false;
>  	primary->max_downscale = 1;
> +	if (INTEL_INFO(dev)->gen >= 9) {
> +		primary->can_scale = true;
> +	}
>  	state->scaler_id = -1;
>  	primary->pipe = pipe;
>  	primary->plane = pipe;
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 275a4ef..c9bc975 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -288,11 +288,11 @@ struct intel_initial_plane_config {
>  #define SKL_MIN_SRC_W 8
>  #define SKL_MAX_SRC_W 4096
>  #define SKL_MIN_SRC_H 8
> -#define SKL_MAX_SRC_H 2304
> +#define SKL_MAX_SRC_H 4096
>  #define SKL_MIN_DST_W 8
>  #define SKL_MAX_DST_W 4096
>  #define SKL_MIN_DST_H 8
> -#define SKL_MAX_DST_H 2304
> +#define SKL_MAX_DST_H 4096
> 
>  struct intel_scaler {
>  	int id;
> @@ -1131,9 +1131,13 @@ void skl_detach_scalers(struct intel_crtc *intel_crtc);
>  int skl_update_scaler_users(struct intel_crtc *intel_crtc,
>  	struct intel_crtc_state *crtc_state, struct intel_plane *intel_plane,
>  	struct intel_plane_state *plane_state, int force_detach);
> +int skl_max_scale(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state);
> 
>  unsigned long intel_plane_obj_offset(struct intel_plane *intel_plane,
>  				     struct drm_i915_gem_object *obj);
> +u32 skl_plane_ctl_format(uint32_t pixel_format);
> +u32 skl_plane_ctl_tiling(uint64_t fb_modifier);
> +u32 skl_plane_ctl_rotation(unsigned int rotation);
> 
>  /* intel_dp.c */
>  void intel_dp_init(struct drm_device *dev, int output_reg, enum port port);
> diff --git a/drivers/gpu/drm/i915/intel_sprite.c
> b/drivers/gpu/drm/i915/intel_sprite.c
> index 0cb3767..2f42777 100644
> --- a/drivers/gpu/drm/i915/intel_sprite.c
> +++ b/drivers/gpu/drm/i915/intel_sprite.c
> @@ -1150,6 +1150,15 @@ int intel_sprite_set_colorkey(struct drm_device
> *dev, void *data,
>  	}
> 
>  	intel_plane = to_intel_plane(plane);
> +
> +	if (INTEL_INFO(dev)->gen >= 9) {
> +		/* plane scaling and colorkey are mutually exclusive */
> +		if (to_intel_plane_state(plane->state)->scaler_id >= 0) {
> +			DRM_ERROR("colorkey not allowed with scaler\n");
> +			return -EINVAL;
> +		}
> +	}
> +
>  	intel_plane->ckey = *set;
> 
>  	/*
> --
> 1.7.9.5

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx





[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux