This patch enables skylake primary plane scaling using shared
scalers atomic desgin.
v2:
-use single copy of scaler limits (Matt)
v3:
-move detach_scalers to crtc commit path (Matt)
-use values in plane_state->src as regular integers (me)
v4:
-changes to align with updated scaler structures (Matt, me)
-keep plane src rect in 16.16 format (Matt, Daniel)
Signed-off-by: Chandra Konduru <chandra.konduru@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_atomic.c | 5 +-
drivers/gpu/drm/i915/intel_display.c | 96 ++++++++++++++++++++++++++++++++--
drivers/gpu/drm/i915/intel_drv.h | 1 +
drivers/gpu/drm/i915/intel_sprite.c | 9 ++++
4 files changed, 105 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_atomic.c b/drivers/gpu/drm/i915/intel_atomic.c
index 2fc04ec..8f759c6 100644
--- a/drivers/gpu/drm/i915/intel_atomic.c
+++ b/drivers/gpu/drm/i915/intel_atomic.c
@@ -167,7 +167,7 @@ int intel_atomic_commit(struct drm_device *dev,
plane->state->state = NULL;
}
- /* swap crtc_state */
+ /* swap crtc_scaler_state */
for (i = 0; i < dev->mode_config.num_crtc; i++) {
struct drm_crtc *crtc = state->crtcs[i];
if (!crtc) {
@@ -176,6 +176,9 @@ int intel_atomic_commit(struct drm_device *dev,
to_intel_crtc(crtc)->config->scaler_state =
to_intel_crtc_state(state->crtc_states[i])->scaler_state;
+
+ if (INTEL_INFO(dev)->gen >= 9)
+ skl_detach_scalers(to_intel_crtc(crtc));
}
drm_atomic_helper_commit_planes(dev, state);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index aa4da1f..c7ee232 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2978,6 +2978,14 @@ static void skylake_update_primary_plane(struct drm_crtc *crtc,
int pipe = intel_crtc->pipe;
u32 plane_ctl, stride_div;
unsigned long surf_addr;
+ struct intel_crtc_state *crtc_state = intel_crtc->config;
+ struct intel_plane_state *plane_state;
+ int src_x = 0, src_y = 0, src_w = 0, src_h = 0;
+ int dst_x = 0, dst_y = 0, dst_w = 0, dst_h = 0;
+ int scaler_id = -1;
+
+ plane_state = crtc->primary ?
+ to_intel_plane_state(crtc->primary->state) : NULL;
if (!intel_crtc->primary_enabled) {
I915_WRITE(PLANE_CTL(pipe, 0), 0);
@@ -3046,12 +3054,40 @@ static void skylake_update_primary_plane(struct drm_crtc *crtc,
fb->pixel_format);
surf_addr = intel_plane_obj_offset(to_intel_plane(crtc->primary), obj);
+ if (plane_state) {
+ scaler_id = plane_state->scaler_id;
+ src_x = plane_state->src.x1 >> 16;
+ src_y = plane_state->src.y1 >> 16;
+ src_w = drm_rect_width(&plane_state->src) >> 16;
+ src_h = drm_rect_height(&plane_state->src) >> 16;
+ dst_x = plane_state->dst.x1;
+ dst_y = plane_state->dst.y1;
+ dst_w = drm_rect_width(&plane_state->dst);
+ dst_h = drm_rect_height(&plane_state->dst);
+ }
+
I915_WRITE(PLANE_CTL(pipe, 0), plane_ctl);
I915_WRITE(PLANE_POS(pipe, 0), 0);
+
+ if (src_w && src_h && dst_w && dst_h && scaler_id >= 0) {
+ uint32_t ps_ctrl = 0;
+
+ WARN_ON(x != src_x || y != src_y);
+ ps_ctrl = PS_SCALER_EN | PS_PLANE_SEL(0) |
+ crtc_state->scaler_state.scalers[scaler_id].mode;
+ I915_WRITE(SKL_PS_CTRL(pipe, scaler_id), ps_ctrl);
+ I915_WRITE(SKL_PS_PWR_GATE(pipe, scaler_id), 0);
+ I915_WRITE(SKL_PS_WIN_POS(pipe, scaler_id), (dst_x << 16) | dst_y);
+ I915_WRITE(SKL_PS_WIN_SZ(pipe, scaler_id), (dst_w << 16) | dst_h);
+
+ I915_WRITE(PLANE_SIZE(pipe, 0), ((src_h - 1) << 16) | (src_w - 1));
+ } else {
+ I915_WRITE(PLANE_SIZE(pipe, 0),
+ (intel_crtc->config->pipe_src_h - 1) << 16 |
+ (intel_crtc->config->pipe_src_w - 1));
+ }
+
I915_WRITE(PLANE_OFFSET(pipe, 0), (y << 16) | x);
- I915_WRITE(PLANE_SIZE(pipe, 0),
- (intel_crtc->config->pipe_src_h - 1) << 16 |
- (intel_crtc->config->pipe_src_w - 1));
I915_WRITE(PLANE_STRIDE(pipe, 0), fb->pitches[0] / stride_div);
I915_WRITE(PLANE_SURF(pipe, 0), surf_addr);
@@ -12778,6 +12814,36 @@ intel_cleanup_plane_fb(struct drm_plane *plane,
}
}
+int
+skl_max_scale(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state)
+{
+ int max_scale;
+ struct drm_device *dev;
+ struct drm_i915_private *dev_priv;
+ int crtc_clock, cdclk;
+
+ if (!intel_crtc || !crtc_state)
+ return DRM_PLANE_HELPER_NO_SCALING;
+
+ dev = intel_crtc->base.dev;
+ dev_priv = dev->dev_private;
+ crtc_clock = crtc_state->base.adjusted_mode.crtc_clock;
+ cdclk = dev_priv->display.get_display_clock_speed(dev);
+
+ if (!crtc_clock || !cdclk)
+ return DRM_PLANE_HELPER_NO_SCALING;
+
+ /*
+ * skl max scale is lower of:
+ * close to 3 but not 3, -1 is for that purpose
+ * or
+ * cdclk/crtc_clock
+ */
+ max_scale = min((1 << 16) * 3 - 1, (1 << 8) * ((cdclk << 8) / crtc_clock));
+
+ return max_scale;
+}
+
static int
intel_check_primary_plane(struct drm_plane *plane,
struct intel_plane_state *state)
@@ -12786,19 +12852,29 @@ intel_check_primary_plane(struct drm_plane *plane,
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc = state->base.crtc;
struct intel_crtc *intel_crtc;
+ struct intel_crtc_state *crtc_state;
struct drm_framebuffer *fb = state->base.fb;
struct drm_rect *dest = &state->dst;
struct drm_rect *src = &state->src;
const struct drm_rect *clip = &state->clip;
+ int max_scale = DRM_PLANE_HELPER_NO_SCALING;
+ int min_scale = DRM_PLANE_HELPER_NO_SCALING;
int ret;
crtc = crtc ? crtc : plane->crtc;
intel_crtc = to_intel_crtc(crtc);
+ crtc_state = state->base.state ?
+ intel_atomic_get_crtc_state(state->base.state, intel_crtc) : NULL;
+
+ if (INTEL_INFO(dev)->gen >= 9) {
+ min_scale = 1;
+ max_scale = skl_max_scale(intel_crtc, crtc_state);
+ }
ret = drm_plane_helper_check_update(plane, crtc, fb,
src, dest, clip,
- DRM_PLANE_HELPER_NO_SCALING,
- DRM_PLANE_HELPER_NO_SCALING,
+ min_scale,
+ max_scale,
false, true, &state->visible);
if (ret)
return ret;
@@ -12842,6 +12918,13 @@ intel_check_primary_plane(struct drm_plane *plane,
intel_crtc->atomic.update_wm = true;
}
+ if (INTEL_INFO(dev)->gen >= 9) {
+ ret = skl_update_scaler_users(intel_crtc, crtc_state,
+ to_intel_plane(plane), state, 0);
+ if (ret)
+ return ret;
+ }
+
return 0;
}
@@ -13021,6 +13104,9 @@ static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
primary->can_scale = false;
primary->max_downscale = 1;
+ if (INTEL_INFO(dev)->gen >= 9) {
+ primary->can_scale = true;
+ }
state->scaler_id = -1;
primary->pipe = pipe;
primary->plane = pipe;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 7b28bff..0543150 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1125,6 +1125,7 @@ void skl_detach_scalers(struct intel_crtc *intel_crtc);
int skl_update_scaler_users(struct intel_crtc *intel_crtc,
struct intel_crtc_state *crtc_state, struct intel_plane *intel_plane,
struct intel_plane_state *plane_state, int force_detach);
+int skl_max_scale(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state);
unsigned long intel_plane_obj_offset(struct intel_plane *intel_plane,
struct drm_i915_gem_object *obj);
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index c05fb36..955965c 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -1119,6 +1119,15 @@ int intel_sprite_set_colorkey(struct drm_device *dev, void *data,
}
intel_plane = to_intel_plane(plane);
+
+ if (INTEL_INFO(dev)->gen >= 9) {
+ /* plane scaling and colorkey are mutually exclusive */
+ if (to_intel_plane_state(plane->state)->scaler_id >= 0) {
+ DRM_ERROR("colorkey not allowed with scaler\n");
+ return -EINVAL;
+ }
+ }
+
intel_plane->ckey = *set;
/*
--
1.7.9.5
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
