> -----Original Message-----
> From: Roper, Matthew D
> Sent: Thursday, April 09, 2015 2:52 PM
> To: Konduru, Chandra
> Cc: intel-gfx@xxxxxxxxxxxxxxxxxxxxx; Vetter, Daniel; Conselvan De Oliveira, Ander
> Subject: Re: [PATCH 13/14] drm/i915: skylake primary plane scaling using shared
> scalers
>
> On Tue, Apr 07, 2015 at 03:28:46PM -0700, Chandra Konduru wrote:
> > This patch enables skylake primary plane scaling using shared scalers
> > atomic desgin.
> >
> > v2:
> > -use single copy of scaler limits (Matt)
> >
> > v3:
> > -move detach_scalers to crtc commit path (Matt) -use values in
> > plane_state->src as regular integers (me)
> >
> > v4:
> > -changes to align with updated scaler structures (Matt, me) -keep
> > plane src rect in 16.16 format (Matt, Daniel)
>
> See comments on patch #6 that relate to this. If you want to take the approach
> here (perform the unshift in skl_update_plane) then you also need to do the
> same for all other platforms (ivb, ilk, vlv, etc.). But my suggestion on the other
> patch (do the unshifting in commit_plane and leave skl_update_plane alone)
> might be a bit simpler.
Above v4: comment is saying that the change done in v3 was undone to keep
primary_plane src rect in 16.16 format.
As I responded to your patch #6 comment, moving unshift hunk (which is for
sprite plane) from #14 to #6 will avoid any potential bisect issue that you mentioned.
For other than skylake, primary planes platform level update functions doesn't use
src_rect instead operate based on passed parameters which are in regular ints.
Only for skylake primary plane update function, src rect is used for windowing,
scaling purposes.
>
>
> Matt
>
> >
> > Signed-off-by: Chandra Konduru <chandra.konduru@xxxxxxxxx>
> > ---
> > drivers/gpu/drm/i915/intel_atomic.c | 5 +-
> > drivers/gpu/drm/i915/intel_display.c | 96
> ++++++++++++++++++++++++++++++++--
> > drivers/gpu/drm/i915/intel_drv.h | 1 +
> > drivers/gpu/drm/i915/intel_sprite.c | 9 ++++
> > 4 files changed, 105 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_atomic.c
> > b/drivers/gpu/drm/i915/intel_atomic.c
> > index 2fc04ec..8f759c6 100644
> > --- a/drivers/gpu/drm/i915/intel_atomic.c
> > +++ b/drivers/gpu/drm/i915/intel_atomic.c
> > @@ -167,7 +167,7 @@ int intel_atomic_commit(struct drm_device *dev,
> > plane->state->state = NULL;
> > }
> >
> > - /* swap crtc_state */
> > + /* swap crtc_scaler_state */
> > for (i = 0; i < dev->mode_config.num_crtc; i++) {
> > struct drm_crtc *crtc = state->crtcs[i];
> > if (!crtc) {
> > @@ -176,6 +176,9 @@ int intel_atomic_commit(struct drm_device *dev,
> >
> > to_intel_crtc(crtc)->config->scaler_state =
> > to_intel_crtc_state(state->crtc_states[i])->scaler_state;
> > +
> > + if (INTEL_INFO(dev)->gen >= 9)
> > + skl_detach_scalers(to_intel_crtc(crtc));
> > }
> >
> > drm_atomic_helper_commit_planes(dev, state); diff --git
> > a/drivers/gpu/drm/i915/intel_display.c
> > b/drivers/gpu/drm/i915/intel_display.c
> > index aa4da1f..c7ee232 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -2978,6 +2978,14 @@ static void skylake_update_primary_plane(struct
> drm_crtc *crtc,
> > int pipe = intel_crtc->pipe;
> > u32 plane_ctl, stride_div;
> > unsigned long surf_addr;
> > + struct intel_crtc_state *crtc_state = intel_crtc->config;
> > + struct intel_plane_state *plane_state;
> > + int src_x = 0, src_y = 0, src_w = 0, src_h = 0;
> > + int dst_x = 0, dst_y = 0, dst_w = 0, dst_h = 0;
> > + int scaler_id = -1;
> > +
> > + plane_state = crtc->primary ?
> > + to_intel_plane_state(crtc->primary->state) : NULL;
> >
> > if (!intel_crtc->primary_enabled) {
> > I915_WRITE(PLANE_CTL(pipe, 0), 0);
> > @@ -3046,12 +3054,40 @@ static void skylake_update_primary_plane(struct
> drm_crtc *crtc,
> > fb->pixel_format);
> > surf_addr = intel_plane_obj_offset(to_intel_plane(crtc->primary),
> > obj);
> >
> > + if (plane_state) {
> > + scaler_id = plane_state->scaler_id;
> > + src_x = plane_state->src.x1 >> 16;
> > + src_y = plane_state->src.y1 >> 16;
> > + src_w = drm_rect_width(&plane_state->src) >> 16;
> > + src_h = drm_rect_height(&plane_state->src) >> 16;
> > + dst_x = plane_state->dst.x1;
> > + dst_y = plane_state->dst.y1;
> > + dst_w = drm_rect_width(&plane_state->dst);
> > + dst_h = drm_rect_height(&plane_state->dst);
> > + }
> > +
> > I915_WRITE(PLANE_CTL(pipe, 0), plane_ctl);
> > I915_WRITE(PLANE_POS(pipe, 0), 0);
> > +
> > + if (src_w && src_h && dst_w && dst_h && scaler_id >= 0) {
> > + uint32_t ps_ctrl = 0;
> > +
> > + WARN_ON(x != src_x || y != src_y);
> > + ps_ctrl = PS_SCALER_EN | PS_PLANE_SEL(0) |
> > + crtc_state->scaler_state.scalers[scaler_id].mode;
> > + I915_WRITE(SKL_PS_CTRL(pipe, scaler_id), ps_ctrl);
> > + I915_WRITE(SKL_PS_PWR_GATE(pipe, scaler_id), 0);
> > + I915_WRITE(SKL_PS_WIN_POS(pipe, scaler_id), (dst_x << 16) |
> dst_y);
> > + I915_WRITE(SKL_PS_WIN_SZ(pipe, scaler_id), (dst_w << 16) |
> dst_h);
> > +
> > + I915_WRITE(PLANE_SIZE(pipe, 0), ((src_h - 1) << 16) | (src_w -
> 1));
> > + } else {
> > + I915_WRITE(PLANE_SIZE(pipe, 0),
> > + (intel_crtc->config->pipe_src_h - 1) << 16 |
> > + (intel_crtc->config->pipe_src_w - 1));
> > + }
> > +
> > I915_WRITE(PLANE_OFFSET(pipe, 0), (y << 16) | x);
> > - I915_WRITE(PLANE_SIZE(pipe, 0),
> > - (intel_crtc->config->pipe_src_h - 1) << 16 |
> > - (intel_crtc->config->pipe_src_w - 1));
> > I915_WRITE(PLANE_STRIDE(pipe, 0), fb->pitches[0] / stride_div);
> > I915_WRITE(PLANE_SURF(pipe, 0), surf_addr);
> >
> > @@ -12778,6 +12814,36 @@ intel_cleanup_plane_fb(struct drm_plane
> *plane,
> > }
> > }
> >
> > +int
> > +skl_max_scale(struct intel_crtc *intel_crtc, struct intel_crtc_state
> > +*crtc_state) {
> > + int max_scale;
> > + struct drm_device *dev;
> > + struct drm_i915_private *dev_priv;
> > + int crtc_clock, cdclk;
> > +
> > + if (!intel_crtc || !crtc_state)
> > + return DRM_PLANE_HELPER_NO_SCALING;
> > +
> > + dev = intel_crtc->base.dev;
> > + dev_priv = dev->dev_private;
> > + crtc_clock = crtc_state->base.adjusted_mode.crtc_clock;
> > + cdclk = dev_priv->display.get_display_clock_speed(dev);
> > +
> > + if (!crtc_clock || !cdclk)
> > + return DRM_PLANE_HELPER_NO_SCALING;
> > +
> > + /*
> > + * skl max scale is lower of:
> > + * close to 3 but not 3, -1 is for that purpose
> > + * or
> > + * cdclk/crtc_clock
> > + */
> > + max_scale = min((1 << 16) * 3 - 1, (1 << 8) * ((cdclk << 8) /
> > +crtc_clock));
> > +
> > + return max_scale;
> > +}
> > +
> > static int
> > intel_check_primary_plane(struct drm_plane *plane,
> > struct intel_plane_state *state) @@ -12786,19
> +12852,29 @@
> > intel_check_primary_plane(struct drm_plane *plane,
> > struct drm_i915_private *dev_priv = dev->dev_private;
> > struct drm_crtc *crtc = state->base.crtc;
> > struct intel_crtc *intel_crtc;
> > + struct intel_crtc_state *crtc_state;
> > struct drm_framebuffer *fb = state->base.fb;
> > struct drm_rect *dest = &state->dst;
> > struct drm_rect *src = &state->src;
> > const struct drm_rect *clip = &state->clip;
> > + int max_scale = DRM_PLANE_HELPER_NO_SCALING;
> > + int min_scale = DRM_PLANE_HELPER_NO_SCALING;
> > int ret;
> >
> > crtc = crtc ? crtc : plane->crtc;
> > intel_crtc = to_intel_crtc(crtc);
> > + crtc_state = state->base.state ?
> > + intel_atomic_get_crtc_state(state->base.state, intel_crtc) :
> NULL;
> > +
> > + if (INTEL_INFO(dev)->gen >= 9) {
> > + min_scale = 1;
> > + max_scale = skl_max_scale(intel_crtc, crtc_state);
> > + }
> >
> > ret = drm_plane_helper_check_update(plane, crtc, fb,
> > src, dest, clip,
> > - DRM_PLANE_HELPER_NO_SCALING,
> > - DRM_PLANE_HELPER_NO_SCALING,
> > + min_scale,
> > + max_scale,
> > false, true, &state->visible);
> > if (ret)
> > return ret;
> > @@ -12842,6 +12918,13 @@ intel_check_primary_plane(struct drm_plane
> *plane,
> > intel_crtc->atomic.update_wm = true;
> > }
> >
> > + if (INTEL_INFO(dev)->gen >= 9) {
> > + ret = skl_update_scaler_users(intel_crtc, crtc_state,
> > + to_intel_plane(plane), state, 0);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > return 0;
> > }
> >
> > @@ -13021,6 +13104,9 @@ static struct drm_plane
> > *intel_primary_plane_create(struct drm_device *dev,
> >
> > primary->can_scale = false;
> > primary->max_downscale = 1;
> > + if (INTEL_INFO(dev)->gen >= 9) {
> > + primary->can_scale = true;
> > + }
> > state->scaler_id = -1;
> > primary->pipe = pipe;
> > primary->plane = pipe;
> > diff --git a/drivers/gpu/drm/i915/intel_drv.h
> > b/drivers/gpu/drm/i915/intel_drv.h
> > index 7b28bff..0543150 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -1125,6 +1125,7 @@ void skl_detach_scalers(struct intel_crtc
> > *intel_crtc); int skl_update_scaler_users(struct intel_crtc *intel_crtc,
> > struct intel_crtc_state *crtc_state, struct intel_plane *intel_plane,
> > struct intel_plane_state *plane_state, int force_detach);
> > +int skl_max_scale(struct intel_crtc *crtc, struct intel_crtc_state
> > +*crtc_state);
> >
> > unsigned long intel_plane_obj_offset(struct intel_plane *intel_plane,
> > struct drm_i915_gem_object *obj); diff --git
> > a/drivers/gpu/drm/i915/intel_sprite.c
> > b/drivers/gpu/drm/i915/intel_sprite.c
> > index c05fb36..955965c 100644
> > --- a/drivers/gpu/drm/i915/intel_sprite.c
> > +++ b/drivers/gpu/drm/i915/intel_sprite.c
> > @@ -1119,6 +1119,15 @@ int intel_sprite_set_colorkey(struct drm_device
> *dev, void *data,
> > }
> >
> > intel_plane = to_intel_plane(plane);
> > +
> > + if (INTEL_INFO(dev)->gen >= 9) {
> > + /* plane scaling and colorkey are mutually exclusive */
> > + if (to_intel_plane_state(plane->state)->scaler_id >= 0) {
> > + DRM_ERROR("colorkey not allowed with scaler\n");
> > + return -EINVAL;
> > + }
> > + }
> > +
> > intel_plane->ckey = *set;
> >
> > /*
> > --
> > 1.7.9.5
> >
>
> --
> Matt Roper
> Graphics Software Engineer
> IoTG Platform Enabling & Development
> Intel Corporation
> (916) 356-2795
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
