On Thu, 2015-03-19 at 13:34 -0700, Jesse Barnes wrote:
> On 03/17/2015 02:40 AM, Imre Deak wrote:
> > Prepare chv_find_best_dpll to be used for BXT too, where we want to
> > consider the error between target and calculated frequency too when
> > choosing a better PLL configuration.
> >
> > No functional change.
> >
> > Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
> > ---
> > drivers/gpu/drm/i915/intel_display.c | 26 ++++++++++++++++++++------
> > 1 file changed, 20 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > index 5874512..9ca84a2 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -786,6 +786,16 @@ static bool vlv_PLL_is_optimal(struct drm_device *dev, int target_freq,
> > unsigned int best_error_ppm,
> > unsigned int *error_ppm)
> > {
> > + /*
> > + * For CHV ignore the error and consider only the P value.
> > + * Prefer a bigger P value based on HW requirements.
> > + */
> > + if (IS_CHERRYVIEW(dev)) {
> > + *error_ppm = 0;
> > +
> > + return calculated_clock->p > best_clock->p;
> > + }
> > +
> > if (WARN_ON_ONCE(!target_freq))
> > return false;
> >
> > @@ -864,11 +874,13 @@ chv_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
> > intel_clock_t *best_clock)
> > {
> > struct drm_device *dev = crtc->base.dev;
> > + unsigned int best_error_ppm;
> > intel_clock_t clock;
> > uint64_t m2;
> > int found = false;
> >
> > memset(best_clock, 0, sizeof(*best_clock));
> > + best_error_ppm = 1000000;
> >
> > /*
> > * Based on hardware doc, the n always set to 1, and m1 always
> > @@ -882,6 +894,7 @@ chv_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
> > for (clock.p2 = limit->p2.p2_fast;
> > clock.p2 >= limit->p2.p2_slow;
> > clock.p2 -= clock.p2 > 10 ? 2 : 1) {
> > + unsigned int error_ppm;
> >
> > clock.p = clock.p1 * clock.p2;
> >
> > @@ -898,12 +911,13 @@ chv_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
> > if (!intel_PLL_is_valid(dev, limit, &clock))
> > continue;
> >
> > - /* based on hardware requirement, prefer bigger p
> > - */
> > - if (clock.p > best_clock->p) {
> > - *best_clock = clock;
> > - found = true;
> > - }
> > + if (!vlv_PLL_is_optimal(dev, target, &clock, best_clock,
> > + best_error_ppm, &error_ppm))
> > + continue;
> > +
> > + *best_clock = clock;
> > + best_error_ppm = error_ppm;
> > + found = true;
> > }
> > }
> >
> >
>
> Looking at it again, maybe vlv_PLL_is_better() might be a better name.
Ok, will change it.
> Also, could you just make the ppm variable a scratch one and ignore it?
> It just gets set to 0 no matter what, right?
For CHV yes. But the next patch takes the same function into use in BXT
too, where error_ppm will be set to the actual error, the same way as on
VLV.
> Reviewed-by: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
