On Wed, Mar 11, 2015 at 11:37:54AM +0000, Conselvan De Oliveira, Ander wrote: > On Wed, 2015-03-11 at 13:35 +0200, Ander Conselvan de Oliveira wrote: > > Remove the global modeset resource function that would disable the > > bifurcation bit, and instead enable/disable it when enabling the pch > > transcoder. The mode set consistency check should prevent us from > > disabling the bit if pipe C is enabled so the change should be safe. > > > > Note that this doens't affect the logic that prevents the bit being > > set while a pipe is active, since the patch retains the behavior of > > only chaging the bit if necessary. Because of the checks during mode > > set, the first change would necessarily happen with both pipes B and > > C disabled, and any subsequent write would be skipped. > > > > v2: Only change the bit during pch trancoder enable. (Ville) > > Oops, I forgot the sob line. > > Signed-off-by: Ander Conselvan de Oliveira > <ander.conselvan.de.oliveira@xxxxxxxxx> So I was staring at this stuff for a while and I believe it should be fine. We don't keep the bifurcation state entirely consistent when neither of the the pipes B/C are actually driving a PCH transcoder, but that shouldn't really matter. If we want to make it consistent then I suggest that we go with my earlier idea of only changing the state at transcoder B with >2 lanes enable/disable, and otherwise keep it enabled all the time. The slight complication there is the initial state we get from the BIOS which might not match that, so we'd need to sanitize it or something. Anyway, I also posted a couple of patches on top that try to sort out ironlake_check_fdi_lanes() [1]. With those and this one I think things should work even better than before. So for this patch: Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> [1] http://lists.freedesktop.org/archives/intel-gfx/2015-March/061828.html > > > --- > > drivers/gpu/drm/i915/intel_display.c | 46 ++++++++---------------------------- > > 1 file changed, 10 insertions(+), 36 deletions(-) > > > > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c > > index 4008bf4..bfbd829 100644 > > --- a/drivers/gpu/drm/i915/intel_display.c > > +++ b/drivers/gpu/drm/i915/intel_display.c > > @@ -3153,32 +3153,6 @@ static bool pipe_has_enabled_pch(struct intel_crtc *crtc) > > return crtc->base.state->enable && crtc->config->has_pch_encoder; > > } > > > > -static void ivb_modeset_global_resources(struct drm_device *dev) > > -{ > > - struct drm_i915_private *dev_priv = dev->dev_private; > > - struct intel_crtc *pipe_B_crtc = > > - to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]); > > - struct intel_crtc *pipe_C_crtc = > > - to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_C]); > > - uint32_t temp; > > - > > - /* > > - * When everything is off disable fdi C so that we could enable fdi B > > - * with all lanes. Note that we don't care about enabled pipes without > > - * an enabled pch encoder. > > - */ > > - if (!pipe_has_enabled_pch(pipe_B_crtc) && > > - !pipe_has_enabled_pch(pipe_C_crtc)) { > > - WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE); > > - WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE); > > - > > - temp = I915_READ(SOUTH_CHICKEN1); > > - temp &= ~FDI_BC_BIFURCATION_SELECT; > > - DRM_DEBUG_KMS("disabling fdi C rx\n"); > > - I915_WRITE(SOUTH_CHICKEN1, temp); > > - } > > -} > > - > > /* The FDI link training functions for ILK/Ibexpeak. */ > > static void ironlake_fdi_link_train(struct drm_crtc *crtc) > > { > > @@ -3834,20 +3808,23 @@ static void ironlake_pch_transcoder_set_timings(struct intel_crtc *crtc, > > I915_READ(VSYNCSHIFT(cpu_transcoder))); > > } > > > > -static void cpt_enable_fdi_bc_bifurcation(struct drm_device *dev) > > +static void cpt_set_fdi_bc_bifurcation(struct drm_device *dev, bool enable) > > { > > struct drm_i915_private *dev_priv = dev->dev_private; > > uint32_t temp; > > > > temp = I915_READ(SOUTH_CHICKEN1); > > - if (temp & FDI_BC_BIFURCATION_SELECT) > > + if (!!(temp & FDI_BC_BIFURCATION_SELECT) == enable) > > return; > > > > WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE); > > WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE); > > > > - temp |= FDI_BC_BIFURCATION_SELECT; > > - DRM_DEBUG_KMS("enabling fdi C rx\n"); > > + temp &= ~FDI_BC_BIFURCATION_SELECT; > > + if (enable) > > + temp |= FDI_BC_BIFURCATION_SELECT; > > + > > + DRM_DEBUG_KMS("%sabling fdi C rx\n", enable ? "en" : "dis"); > > I915_WRITE(SOUTH_CHICKEN1, temp); > > POSTING_READ(SOUTH_CHICKEN1); > > } > > @@ -3855,20 +3832,19 @@ static void cpt_enable_fdi_bc_bifurcation(struct drm_device *dev) > > static void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc) > > { > > struct drm_device *dev = intel_crtc->base.dev; > > - struct drm_i915_private *dev_priv = dev->dev_private; > > > > switch (intel_crtc->pipe) { > > case PIPE_A: > > break; > > case PIPE_B: > > if (intel_crtc->config->fdi_lanes > 2) > > - WARN_ON(I915_READ(SOUTH_CHICKEN1) & FDI_BC_BIFURCATION_SELECT); > > + cpt_set_fdi_bc_bifurcation(dev, false); > > else > > - cpt_enable_fdi_bc_bifurcation(dev); > > + cpt_set_fdi_bc_bifurcation(dev, true); > > > > break; > > case PIPE_C: > > - cpt_enable_fdi_bc_bifurcation(dev); > > + cpt_set_fdi_bc_bifurcation(dev, true); > > > > break; > > default: > > @@ -13056,8 +13032,6 @@ static void intel_init_display(struct drm_device *dev) > > } else if (IS_IVYBRIDGE(dev)) { > > /* FIXME: detect B0+ stepping and use auto training */ > > dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train; > > - dev_priv->display.modeset_global_resources = > > - ivb_modeset_global_resources; > > } else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) { > > dev_priv->display.fdi_link_train = hsw_fdi_link_train; > > } else if (IS_VALLEYVIEW(dev)) { > -- Ville Syrjälä Intel OTC _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/intel-gfx
