On 2/10/2015 6:58 PM, ville.syrjala@xxxxxxxxxxxxxxx wrote:
From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
CHV has a new knob in Punit to select between some memory power savings
modes PM2 and PM5. We can allow the deeper PM5 when maxfifo mode is
enabled, so let's do so in the hopes for moar power savings.
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/i915_reg.h | 3 +++
drivers/gpu/drm/i915/intel_pm.c | 13 ++++++++++++-
2 files changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index a0a7688..2196e57 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -552,6 +552,9 @@
#define DSPFREQSTAT_MASK (0x3 << DSPFREQSTAT_SHIFT)
#define DSPFREQGUAR_SHIFT 14
#define DSPFREQGUAR_MASK (0x3 << DSPFREQGUAR_SHIFT)
+#define DSP_MAXFIFO_PM5_STATUS (1 << 22) /* chv */
+#define DSP_AUTO_CDCLK_GATE_DISABLE (1 << 7) /* chv */
+#define DSP_MAXFIFO_PM5_ENABLE (1 << 6) /* chv */
#define _DP_SSC(val, pipe) ((val) << (2 * (pipe)))
#define DP_SSC_MASK(pipe) _DP_SSC(0x3, (pipe))
#define DP_SSC_PWR_ON(pipe) _DP_SSC(0x0, (pipe))
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index e6cbc24..4e11552 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -240,7 +240,18 @@ void intel_set_memory_cxsr(struct drm_i915_private *dev_priv, bool enable)
struct drm_device *dev = dev_priv->dev;
u32 val;
- if (IS_VALLEYVIEW(dev)) {
+ if (IS_CHERRYVIEW(dev)) {
+ I915_WRITE(FW_BLC_SELF_VLV, enable ? FW_CSPWRDWNEN : 0);
+
+ mutex_lock(&dev_priv->rps.hw_lock);
+ val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
+ if (enable)
+ val |= DSP_MAXFIFO_PM5_ENABLE;
+ else
+ val &= ~DSP_MAXFIFO_PM5_ENABLE;
+ vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val);
+ mutex_unlock(&dev_priv->rps.hw_lock);
+ } else if (IS_VALLEYVIEW(dev)) {
I915_WRITE(FW_BLC_SELF_VLV, enable ? FW_CSPWRDWNEN : 0);
} else if (IS_G4X(dev) || IS_CRESTLINE(dev)) {
I915_WRITE(FW_BLC_SELF, enable ? FW_BLC_SELF_EN : 0);
Since you are enabling MaxFIFO for multi plane in one of the previous
patches, i guess PM5 will also be enabled when more than one plane is
active in this flow.
Let's enable MaxFIFO and PM5 when only one plane is active for now. This
is the only validated scenario by SV.
With this addressed,
Reviewed-by: Vijay Purushothaman <vijay.a.purushothaman@xxxxxxxxxxxxxxx>
Thanks,
Vijay
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
