Re: [v2 2/5] drm/i915: Limit max VCO supported in CHV to 6.48GHz

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2/23/2015 9:43 PM, Daniel Vetter wrote:
On Mon, Feb 16, 2015 at 01:21:34PM +0200, Ville Syrjälä wrote:
On Mon, Feb 16, 2015 at 03:07:59PM +0530, Vijay Purushothaman wrote:
As per the recommendation from PHY team, limit the max vco supported in CHV to 6.48 GHz

Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@xxxxxxxxxxxxxxx>
---
  drivers/gpu/drm/i915/intel_display.c |    2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 3b0fe9f..4e710f6 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -390,7 +390,7 @@ static const intel_limit_t intel_limits_chv = {
  	 * them would make no difference.
  	 */
  	.dot = { .min = 25000 * 5, .max = 540000 * 5},
-	.vco = { .min = 4860000, .max = 6700000 },
+	.vco = { .min = 4860000, .max = 6480000 },
I have a patch here to reduce the minimum to 4.80 GHz, otherwise I can't
get my 2560x1440 HDMI display working (241.5 MHz clock). With that change
we still have a gap (233-240 MHz) in the frequencies we can produce.
Reducing the max to 6.48 GHz will increase that gap to 216-240 MHz, which
is a bit unfortunate. But if that's the recommendation we should follow
it I suppose, and hope no HDMI displays will want such frequencies.

Is there an updated spreadsheet available with the new limits? Quite a
few of the frequencies in the original spreadsheet did have vco>6.48
GHz.
Has the updated doc been dug up meanwhile? A big part of review is getting
access to docs and making sure they're up-to-date too ...
-Daniel
I sent the copy of excel sheet that i am using to both of you in another mail. I still end up relying on windows driver folks since they seem to be having latest information about PHY.

Thanks,
Vijay
I any case this seems OK, so
Acked-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>

  	.n = { .min = 1, .max = 1 },
  	.m1 = { .min = 2, .max = 2 },
  	.m2 = { .min = 24 << 22, .max = 175 << 22 },
--
1.7.9.5

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx





[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux