Re: [PATCH] drm/i915/chv: Enable HDMI Clock recovery for Pipe C

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 03 Dec 2014, Clint Taylor <clinton.a.taylor@xxxxxxxxx> wrote:
> On 12/03/2014 01:01 PM, Ville Syrjälä wrote:
>> On Wed, Dec 03, 2014 at 10:10:30AM -0800, clinton.a.taylor@xxxxxxxxx wrote:
>>> From: Clint Taylor <clinton.a.taylor@xxxxxxxxx>
>>>
>>> Added PIPE C register support for CHV audio programming.
>>
>> nak. The offset between the pipes looks constant so it should work
>> just fine with _PIPE().
>
> Correct. Now I just need to figure out why AUD_CONFIG_C is cleared after 
> ChromeOS boot.

"after boot" is a long time! ;)

Do your logs show that ilk_audio_codec_disable (see intel_audio.c) gets
called? With drm.debug=14 you should see "Disable audio codec on port
%c, pipe %c\n".

BR,
Jani.




>
> -Clint
>
>>
>>>
>>> Signed-off-by: Clint Taylor <clinton.a.taylor@xxxxxxxxx>
>>> ---
>>>   drivers/gpu/drm/i915/i915_reg.h |   18 ++++++++++++------
>>>   1 file changed, 12 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
>>> index dc03fac..3d5813a 100644
>>> --- a/drivers/gpu/drm/i915/i915_reg.h
>>> +++ b/drivers/gpu/drm/i915/i915_reg.h
>>> @@ -6189,14 +6189,18 @@ enum punit_power_well {
>>>
>>>   #define _VLV_HDMIW_HDMIEDID_A		(VLV_DISPLAY_BASE + 0x62050)
>>>   #define _VLV_HDMIW_HDMIEDID_B		(VLV_DISPLAY_BASE + 0x62150)
>>> -#define VLV_HDMIW_HDMIEDID(pipe) _PIPE(pipe, \
>>> +#define _CHV_HDMIW_HDMIEDID_C		(VLV_DISPLAY_BASE + 0x62250)
>>> +#define VLV_HDMIW_HDMIEDID(pipe) _PIPE3(pipe, \
>>>   					_VLV_HDMIW_HDMIEDID_A, \
>>> -					_VLV_HDMIW_HDMIEDID_B)
>>> +					_VLV_HDMIW_HDMIEDID_B, \
>>> +					_CHV_HDMIW_HDMIEDID_C)
>>>   #define _VLV_AUD_CNTL_ST_A		(VLV_DISPLAY_BASE + 0x620B4)
>>>   #define _VLV_AUD_CNTL_ST_B		(VLV_DISPLAY_BASE + 0x621B4)
>>> -#define VLV_AUD_CNTL_ST(pipe) _PIPE(pipe, \
>>> +#define _CHV_AUD_CNTL_ST_C		(VLV_DISPLAY_BASE + 0x622B4)
>>> +#define VLV_AUD_CNTL_ST(pipe) _PIPE3(pipe, \
>>>   					_VLV_AUD_CNTL_ST_A, \
>>> -					_VLV_AUD_CNTL_ST_B)
>>> +					_VLV_AUD_CNTL_ST_B, \
>>> +					_CHV_AUD_CNTL_ST_C)
>>>   #define VLV_AUD_CNTL_ST2		(VLV_DISPLAY_BASE + 0x620C0)
>>>
>>>   /* These are the 4 32-bit write offset registers for each stream
>>> @@ -6217,9 +6221,11 @@ enum punit_power_well {
>>>   					_CPT_AUD_CONFIG_B)
>>>   #define _VLV_AUD_CONFIG_A		(VLV_DISPLAY_BASE + 0x62000)
>>>   #define _VLV_AUD_CONFIG_B		(VLV_DISPLAY_BASE + 0x62100)
>>> -#define VLV_AUD_CFG(pipe) _PIPE(pipe, \
>>> +#define _CHV_AUD_CONFIG_C		(VLV_DISPLAY_BASE + 0x62200)
>>> +#define VLV_AUD_CFG(pipe) _PIPE3(pipe, \
>>>   					_VLV_AUD_CONFIG_A, \
>>> -					_VLV_AUD_CONFIG_B)
>>> +					_VLV_AUD_CONFIG_B, \
>>> +					_CHV_AUD_CONFIG_C)
>>>
>>>   #define   AUD_CONFIG_N_VALUE_INDEX		(1 << 29)
>>>   #define   AUD_CONFIG_N_PROG_ENABLE		(1 << 28)
>>> --
>>> 1.7.9.5
>>>
>>> _______________________________________________
>>> Intel-gfx mailing list
>>> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
>>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>>
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx





[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux