Re: [PATCH] drm/i915/chv: Enable HDMI Clock recovery for Pipe C

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/03/2014 01:01 PM, Ville Syrjälä wrote:
On Wed, Dec 03, 2014 at 10:10:30AM -0800, clinton.a.taylor@xxxxxxxxx wrote:
From: Clint Taylor <clinton.a.taylor@xxxxxxxxx>

Added PIPE C register support for CHV audio programming.

nak. The offset between the pipes looks constant so it should work
just fine with _PIPE().

Correct. Now I just need to figure out why AUD_CONFIG_C is cleared after ChromeOS boot.

-Clint



Signed-off-by: Clint Taylor <clinton.a.taylor@xxxxxxxxx>
---
  drivers/gpu/drm/i915/i915_reg.h |   18 ++++++++++++------
  1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index dc03fac..3d5813a 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6189,14 +6189,18 @@ enum punit_power_well {

  #define _VLV_HDMIW_HDMIEDID_A		(VLV_DISPLAY_BASE + 0x62050)
  #define _VLV_HDMIW_HDMIEDID_B		(VLV_DISPLAY_BASE + 0x62150)
-#define VLV_HDMIW_HDMIEDID(pipe) _PIPE(pipe, \
+#define _CHV_HDMIW_HDMIEDID_C		(VLV_DISPLAY_BASE + 0x62250)
+#define VLV_HDMIW_HDMIEDID(pipe) _PIPE3(pipe, \
  					_VLV_HDMIW_HDMIEDID_A, \
-					_VLV_HDMIW_HDMIEDID_B)
+					_VLV_HDMIW_HDMIEDID_B, \
+					_CHV_HDMIW_HDMIEDID_C)
  #define _VLV_AUD_CNTL_ST_A		(VLV_DISPLAY_BASE + 0x620B4)
  #define _VLV_AUD_CNTL_ST_B		(VLV_DISPLAY_BASE + 0x621B4)
-#define VLV_AUD_CNTL_ST(pipe) _PIPE(pipe, \
+#define _CHV_AUD_CNTL_ST_C		(VLV_DISPLAY_BASE + 0x622B4)
+#define VLV_AUD_CNTL_ST(pipe) _PIPE3(pipe, \
  					_VLV_AUD_CNTL_ST_A, \
-					_VLV_AUD_CNTL_ST_B)
+					_VLV_AUD_CNTL_ST_B, \
+					_CHV_AUD_CNTL_ST_C)
  #define VLV_AUD_CNTL_ST2		(VLV_DISPLAY_BASE + 0x620C0)

  /* These are the 4 32-bit write offset registers for each stream
@@ -6217,9 +6221,11 @@ enum punit_power_well {
  					_CPT_AUD_CONFIG_B)
  #define _VLV_AUD_CONFIG_A		(VLV_DISPLAY_BASE + 0x62000)
  #define _VLV_AUD_CONFIG_B		(VLV_DISPLAY_BASE + 0x62100)
-#define VLV_AUD_CFG(pipe) _PIPE(pipe, \
+#define _CHV_AUD_CONFIG_C		(VLV_DISPLAY_BASE + 0x62200)
+#define VLV_AUD_CFG(pipe) _PIPE3(pipe, \
  					_VLV_AUD_CONFIG_A, \
-					_VLV_AUD_CONFIG_B)
+					_VLV_AUD_CONFIG_B, \
+					_CHV_AUD_CONFIG_C)

  #define   AUD_CONFIG_N_VALUE_INDEX		(1 << 29)
  #define   AUD_CONFIG_N_PROG_ENABLE		(1 << 28)
--
1.7.9.5

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx


_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx





[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux