On Mon, Oct 27, 2014 at 02:17:34PM +0200, Ville Syrjälä wrote:
> On Wed, Oct 22, 2014 at 09:57:06AM +0300, Ville Syrjälä wrote:
> > On Fri, Oct 17, 2014 at 08:05:08AM -0700, Rodrigo Vivi wrote:
> > > Current chv spec teels we can only use either 16 or 32 bits as precision.
> > >
> > > Although in the past VLV went from 16/32 to 32/64 and spec might not be updated,
> > > these precision values brings stability and fixes some issues Wayne was facing.
> >
> > Lies, damned lies, specs!
> >
> > Well in this case I guess the spec might be correct since it helps
> > Wayne.
> >
> > >
> > > Cc: Wayne Boyer <wayne.boyer@xxxxxxxxx>
> > > Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > > Signed-off-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
> > > ---
> > > drivers/gpu/drm/i915/i915_reg.h | 13 +++++++------
> > > drivers/gpu/drm/i915/intel_pm.c | 40 +++++++++++++++++++++++++---------------
> > > 2 files changed, 32 insertions(+), 21 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> > > index 6db369a..dcd5650 100644
> > > --- a/drivers/gpu/drm/i915/i915_reg.h
> > > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > > @@ -4054,17 +4054,18 @@ enum punit_power_well {
> > > #define DSPFW_PLANEA_WM1_HI_MASK (1<<0)
> > >
> > > /* drain latency register values*/
> > > +#define DRAIN_LATENCY_PRECISION_16 16
> > > #define DRAIN_LATENCY_PRECISION_32 32
> > > #define DRAIN_LATENCY_PRECISION_64 64
> >
> > While you're poking at this stuff, could I trouble you to remove these
> > defines and just use the values directly? Could be a separate patch if
> > you prefer.
> >
> > > #define VLV_DDL(pipe) (VLV_DISPLAY_BASE + 0x70050 + 4 * (pipe))
> > > -#define DDL_CURSOR_PRECISION_64 (1<<31)
> > > -#define DDL_CURSOR_PRECISION_32 (0<<31)
> > > +#define DDL_CURSOR_PRECISION_HIGH (1<<31)
> > > +#define DDL_CURSOR_PRECISION_LOW (0<<31)
> > > #define DDL_CURSOR_SHIFT 24
> > > -#define DDL_SPRITE_PRECISION_64(sprite) (1<<(15+8*(sprite)))
> > > -#define DDL_SPRITE_PRECISION_32(sprite) (0<<(15+8*(sprite)))
> > > +#define DDL_SPRITE_PRECISION_HIGH(sprite) (1<<(15+8*(sprite)))
> > > +#define DDL_SPRITE_PRECISION_LOW(sprite) (0<<(15+8*(sprite)))
> > > #define DDL_SPRITE_SHIFT(sprite) (8+8*(sprite))
> > > -#define DDL_PLANE_PRECISION_64 (1<<7)
> > > -#define DDL_PLANE_PRECISION_32 (0<<7)
> > > +#define DDL_PLANE_PRECISION_HIGH (1<<7)
> > > +#define DDL_PLANE_PRECISION_LOW (0<<7)
> > > #define DDL_PLANE_SHIFT 0
> > > #define DRAIN_LATENCY_MASK 0x7f
> > >
> > > diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> > > index daa99e7..50c3512 100644
> > > --- a/drivers/gpu/drm/i915/intel_pm.c
> > > +++ b/drivers/gpu/drm/i915/intel_pm.c
> > > @@ -1345,6 +1345,7 @@ static bool vlv_compute_drain_latency(struct drm_crtc *crtc,
> > > int *prec_mult,
> > > int *drain_latency)
> > > {
> > > + struct drm_device *dev = crtc->dev;
> > > int entries;
> > > int clock = to_intel_crtc(crtc)->config.adjusted_mode.crtc_clock;
> > >
> > > @@ -1355,8 +1356,12 @@ static bool vlv_compute_drain_latency(struct drm_crtc *crtc,
> > > return false;
> > >
> > > entries = DIV_ROUND_UP(clock, 1000) * pixel_size;
> > > - *prec_mult = (entries > 128) ? DRAIN_LATENCY_PRECISION_64 :
> > > - DRAIN_LATENCY_PRECISION_32;
> > > + if (IS_CHERRYVIEW(dev))
> > > + *prec_mult = (entries > 128) ? DRAIN_LATENCY_PRECISION_32 :
> > > + DRAIN_LATENCY_PRECISION_16;
> > > + else
> > > + *prec_mult = (entries > 128) ? DRAIN_LATENCY_PRECISION_64 :
> > > + DRAIN_LATENCY_PRECISION_32;
>
> Actually let me take that r-b back a bit. That 128 needs to be changed for CHV
> as well.
Well it's already backed into history, so no taking back. Bad enough to
warrant a revert or fixup patch ok?
-Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
