On Tue, Aug 19, 2014 at 10:00:55AM +0300, Jani Nikula wrote:
> On Mon, 18 Aug 2014, ville.syrjala@xxxxxxxxxxxxxxx wrote:
> > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> >
> > Move the vlv_power_sequencer_pipe() after the IS_VALLEYVIEW() check
> > and flatten the rest of the function.
>
> Please imagine adding another platform there, and realize this just adds
> unnecessary churn.
I'd just add another reboot notifier then. Frankly I don't understand
the current one either. Why does it need to set the delay to max for
instance? And does this mean that the PANEL_POWER_RESET bit doesn't
actually work as advertised in the docs?
>
> BR,
> Jani.
>
>
> >
> > Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > ---
> > drivers/gpu/drm/i915/intel_dp.c | 24 ++++++++++++------------
> > 1 file changed, 12 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> > index 43dd226..a9ed2a6 100644
> > --- a/drivers/gpu/drm/i915/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > @@ -347,22 +347,22 @@ static int edp_notify_handler(struct notifier_block *this, unsigned long code,
> > struct drm_i915_private *dev_priv = dev->dev_private;
> > u32 pp_div;
> > u32 pp_ctrl_reg, pp_div_reg;
> > - enum pipe pipe = vlv_power_sequencer_pipe(intel_dp);
> > + enum pipe pipe;
> >
> > - if (!is_edp(intel_dp) || code != SYS_RESTART)
> > + if (!IS_VALLEYVIEW(dev) || !is_edp(intel_dp) || code != SYS_RESTART)
> > return 0;
> >
> > - if (IS_VALLEYVIEW(dev)) {
> > - pp_ctrl_reg = VLV_PIPE_PP_CONTROL(pipe);
> > - pp_div_reg = VLV_PIPE_PP_DIVISOR(pipe);
> > - pp_div = I915_READ(pp_div_reg);
> > - pp_div &= PP_REFERENCE_DIVIDER_MASK;
> > + pipe = vlv_power_sequencer_pipe(intel_dp);
> >
> > - /* 0x1F write to PP_DIV_REG sets max cycle delay */
> > - I915_WRITE(pp_div_reg, pp_div | 0x1F);
> > - I915_WRITE(pp_ctrl_reg, PANEL_UNLOCK_REGS | PANEL_POWER_OFF);
> > - msleep(intel_dp->panel_power_cycle_delay);
> > - }
> > + pp_ctrl_reg = VLV_PIPE_PP_CONTROL(pipe);
> > + pp_div_reg = VLV_PIPE_PP_DIVISOR(pipe);
> > + pp_div = I915_READ(pp_div_reg);
> > + pp_div &= PP_REFERENCE_DIVIDER_MASK;
> > +
> > + /* 0x1F write to PP_DIV_REG sets max cycle delay */
> > + I915_WRITE(pp_div_reg, pp_div | 0x1F);
> > + I915_WRITE(pp_ctrl_reg, PANEL_UNLOCK_REGS | PANEL_POWER_OFF);
> > + msleep(intel_dp->panel_power_cycle_delay);
> >
> > return 0;
> > }
> > --
> > 1.8.5.5
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
> --
> Jani Nikula, Intel Open Source Technology Center
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
