On Tue, Jul 29, 2014 at 09:55:39AM -0700, Jesse Barnes wrote:
> On Sat, 28 Jun 2014 02:04:03 +0300
> ville.syrjala@xxxxxxxxxxxxxxx wrote:
>
> > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> >
> > CHV display PHY registes have two swing margin/deemph settings. Make it
> > clear which ones we're using.
> >
> > Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > ---
> > drivers/gpu/drm/i915/i915_reg.h | 8 ++++++--
> > drivers/gpu/drm/i915/intel_dp.c | 4 ++--
> > drivers/gpu/drm/i915/intel_hdmi.c | 4 ++--
> > 3 files changed, 10 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> > index e296312..ba90320 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -831,8 +831,8 @@ enum punit_power_well {
> >
> > #define _VLV_TX_DW2_CH0 0x8288
> > #define _VLV_TX_DW2_CH1 0x8488
> > -#define DPIO_SWING_MARGIN_SHIFT 16
> > -#define DPIO_SWING_MARGIN_MASK (0xff << DPIO_SWING_MARGIN_SHIFT)
> > +#define DPIO_SWING_MARGIN000_SHIFT 16
> > +#define DPIO_SWING_MARGIN000_MASK (0xff << DPIO_SWING_MARGIN000_SHIFT)
> > #define DPIO_UNIQ_TRANS_SCALE_SHIFT 8
> > #define VLV_TX_DW2(ch) _PORT(ch, _VLV_TX_DW2_CH0, _VLV_TX_DW2_CH1)
> >
> > @@ -840,12 +840,16 @@ enum punit_power_well {
> > #define _VLV_TX_DW3_CH1 0x848c
> > /* The following bit for CHV phy */
> > #define DPIO_TX_UNIQ_TRANS_SCALE_EN (1<<27)
> > +#define DPIO_SWING_MARGIN101_SHIFT 16
> > +#define DPIO_SWING_MARGIN101_MASK (0xff << DPIO_SWING_MARGIN101_SHIFT)
> > #define VLV_TX_DW3(ch) _PORT(ch, _VLV_TX_DW3_CH0, _VLV_TX_DW3_CH1)
> >
> > #define _VLV_TX_DW4_CH0 0x8290
> > #define _VLV_TX_DW4_CH1 0x8490
> > #define DPIO_SWING_DEEMPH9P5_SHIFT 24
> > #define DPIO_SWING_DEEMPH9P5_MASK (0xff << DPIO_SWING_DEEMPH9P5_SHIFT)
> > +#define DPIO_SWING_DEEMPH6P0_SHIFT 16
> > +#define DPIO_SWING_DEEMPH6P0_MASK (0xff << DPIO_SWING_DEEMPH6P0_SHIFT)
> > #define VLV_TX_DW4(ch) _PORT(ch, _VLV_TX_DW4_CH0, _VLV_TX_DW4_CH1)
> >
> > #define _VLV_TX3_DW4_CH0 0x690
> > diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> > index e272f92..4457f8f 100644
> > --- a/drivers/gpu/drm/i915/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > @@ -2565,8 +2565,8 @@ static uint32_t intel_chv_signal_levels(struct intel_dp *intel_dp)
> > /* Program swing margin */
> > for (i = 0; i < 4; i++) {
> > val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW2(ch, i));
> > - val &= ~DPIO_SWING_MARGIN_MASK;
> > - val |= margin_reg_value << DPIO_SWING_MARGIN_SHIFT;
> > + val &= ~DPIO_SWING_MARGIN000_MASK;
> > + val |= margin_reg_value << DPIO_SWING_MARGIN000_SHIFT;
> > vlv_dpio_write(dev_priv, pipe, CHV_TX_DW2(ch, i), val);
> > }
> >
> > diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> > index c9d77d3..c5c88127 100644
> > --- a/drivers/gpu/drm/i915/intel_hdmi.c
> > +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> > @@ -1411,8 +1411,8 @@ static void chv_hdmi_pre_enable(struct intel_encoder *encoder)
> >
> > for (i = 0; i < 4; i++) {
> > val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW2(ch, i));
> > - val &= ~DPIO_SWING_MARGIN_MASK;
> > - val |= 102 << DPIO_SWING_MARGIN_SHIFT;
> > + val &= ~DPIO_SWING_MARGIN000_MASK;
> > + val |= 102 << DPIO_SWING_MARGIN000_SHIFT;
> > vlv_dpio_write(dev_priv, pipe, CHV_TX_DW2(ch, i), val);
> > }
> >
>
> Reviewed-by: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
Ok, pulled in the pile of patches Jesse just reviewed.
-Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
