From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
CHV has two display PHYs so there are also two cmnlane power wells. Add
the approriate code to power the wells up/down.
Like on VLV we do the cmnreset assert/deassert and the DPLL refclock
enabling at approriate times.
This code actually works on my bsw.
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/i915_reg.h | 1 +
drivers/gpu/drm/i915/intel_pm.c | 89 +++++++++++++++++++++++++++++++++++++++++
2 files changed, 90 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index d246609..19e68d6 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -512,6 +512,7 @@ enum punit_power_well {
PUNIT_POWER_WELL_DPIO_TX_C_LANES_23 = 9,
PUNIT_POWER_WELL_DPIO_RX0 = 10,
PUNIT_POWER_WELL_DPIO_RX1 = 11,
+ PUNIT_POWER_WELL_DPIO_CMN_D = 12,
PUNIT_POWER_WELL_NUM,
};
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index e2b956e..f88490b 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -6200,6 +6200,64 @@ static void vlv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
vlv_set_power_well(dev_priv, power_well, false);
}
+static void chv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ enum dpio_phy phy;
+
+ WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC &&
+ power_well->data != PUNIT_POWER_WELL_DPIO_CMN_D);
+
+ /*
+ * Enable the CRI clock source so we can get at the
+ * display and the reference clock for VGA
+ * hotplug / manual detection.
+ */
+ if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) {
+ phy = DPIO_PHY0;
+ I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
+ DPLL_REFA_CLK_ENABLE_VLV);
+ I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
+ DPLL_REFA_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV);
+ } else {
+ phy = DPIO_PHY1;
+ I915_WRITE(DPLL(PIPE_C), I915_READ(DPLL(PIPE_C)) |
+ DPLL_REFA_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV);
+ }
+ udelay(1); /* >10ns for cmnreset, >0ns for sidereset */
+ vlv_set_power_well(dev_priv, power_well, true);
+
+ /* Poll for phypwrgood signal */
+ if (wait_for(I915_READ(DISPLAY_PHY_STATUS) & PHY_POWERGOOD(phy), 1))
+ DRM_ERROR("Display PHY %d is not power up\n", phy);
+
+ I915_WRITE(DISPLAY_PHY_CONTROL,
+ PHY_COM_LANE_RESET_DEASSERT(phy, I915_READ(DISPLAY_PHY_CONTROL)));
+}
+
+static void chv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ enum dpio_phy phy;
+
+ WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC &&
+ power_well->data != PUNIT_POWER_WELL_DPIO_CMN_D);
+
+ if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) {
+ phy = DPIO_PHY0;
+ assert_pll_disabled(dev_priv, PIPE_A);
+ assert_pll_disabled(dev_priv, PIPE_B);
+ } else {
+ phy = DPIO_PHY1;
+ assert_pll_disabled(dev_priv, PIPE_C);
+ }
+
+ I915_WRITE(DISPLAY_PHY_CONTROL,
+ PHY_COM_LANE_RESET_ASSERT(phy, I915_READ(DISPLAY_PHY_CONTROL)));
+
+ vlv_set_power_well(dev_priv, power_well, false);
+}
+
static void check_power_well_state(struct drm_i915_private *dev_priv,
struct i915_power_well *power_well)
{
@@ -6369,6 +6427,18 @@ EXPORT_SYMBOL_GPL(i915_release_power_well);
BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) | \
BIT(POWER_DOMAIN_INIT))
+#define CHV_DPIO_CMN_BC_POWER_DOMAINS ( \
+ BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) | \
+ BIT(POWER_DOMAIN_INIT))
+
+#define CHV_DPIO_CMN_D_POWER_DOMAINS ( \
+ BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) | \
+ BIT(POWER_DOMAIN_INIT))
+
static const struct i915_power_well_ops i9xx_always_on_power_well_ops = {
.sync_hw = i9xx_always_on_power_well_noop,
.enable = i9xx_always_on_power_well_noop,
@@ -6498,6 +6568,13 @@ static struct i915_power_well vlv_power_wells[] = {
},
};
+static const struct i915_power_well_ops chv_dpio_cmn_power_well_ops = {
+ .sync_hw = vlv_power_well_sync_hw,
+ .enable = chv_dpio_cmn_power_well_enable,
+ .disable = chv_dpio_cmn_power_well_disable,
+ .is_enabled = vlv_power_well_enabled,
+};
+
static struct i915_power_well chv_power_wells[] = {
{
.name = "always-on",
@@ -6505,6 +6582,18 @@ static struct i915_power_well chv_power_wells[] = {
.domains = VLV_ALWAYS_ON_POWER_DOMAINS,
.ops = &i9xx_always_on_power_well_ops,
},
+ {
+ .name = "dpio-common-bc",
+ .domains = CHV_DPIO_CMN_BC_POWER_DOMAINS,
+ .data = PUNIT_POWER_WELL_DPIO_CMN_BC,
+ .ops = &chv_dpio_cmn_power_well_ops,
+ },
+ {
+ .name = "dpio-common-d",
+ .domains = CHV_DPIO_CMN_D_POWER_DOMAINS,
+ .data = PUNIT_POWER_WELL_DPIO_CMN_D,
+ .ops = &chv_dpio_cmn_power_well_ops,
+ },
};
static struct i915_power_well *lookup_power_well(struct drm_i915_private *dev_priv,
--
1.8.5.5
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
