From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Certain DVO chips (ns2501 for example) don't like to be accessed unless
the PLL is running. Simply skip the DVO get_hw_state if the DVO port
is disabled.
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/intel_dvo.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c
index a3631c0..5d7d975 100644
--- a/drivers/gpu/drm/i915/intel_dvo.c
+++ b/drivers/gpu/drm/i915/intel_dvo.c
@@ -112,7 +112,15 @@ static struct intel_dvo *intel_attached_dvo(struct drm_connector *connector)
static bool intel_dvo_connector_get_hw_state(struct intel_connector *connector)
{
+ struct drm_device *dev = connector->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_dvo *intel_dvo = intel_attached_dvo(&connector->base);
+ u32 tmp;
+
+ tmp = I915_READ(intel_dvo->dev.dvo_reg);
+
+ if (!(tmp & DVO_ENABLE))
+ return false;
return intel_dvo->dev.dev_ops->get_hw_state(&intel_dvo->dev);
}
--
1.8.5.5
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
