Re: [PATCH v4] drm/i915: Replaced Blitter ring based flips with MMIO flips for VLV

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 2014-05-15 at 12:27 +0000, Ville Syrjälä wrote:
> On Thu, May 15, 2014 at 11:47:37AM +0530, sourab.gupta@xxxxxxxxx wrote:
> > From: Sourab Gupta <sourab.gupta@xxxxxxxxx>
> > 
> > Using MMIO based flips on Gen5+ for Media power well residency optimization.
> > The blitter ring is currently being used just for command streamer based
> > flip calls. For pure 3D workloads, with MMIO flips, there will be no use
> > of blitter ring and this will ensure the 100% residency for Media well.
> > 
> > In a subsequent patch, we can make the selection between CS vs MMIO flip
> > based on a module parameter to give more testing coverage.
> > 
> > v2: The MMIO flips now use the interrupt driven mechanism for issuing the
> > flips when target seqno is reached. (Incorporating Ville's idea)
> > 
> > v3: Rebasing on latest code. Code restructuring after incorporating
> > Damien's comments
> > 
> > v4: Addressing Ville's review comments
> >     -general cleanup
> >     -updating only base addr instead of calling update_primary_plane
> >     -extending patch for gen5+ platforms
> > 
> > Signed-off-by: Sourab Gupta <sourab.gupta@xxxxxxxxx>
> > Signed-off-by: Akash Goel <akash.goel@xxxxxxxxx>
> > ---
> >  drivers/gpu/drm/i915/i915_dma.c      |   1 +
> >  drivers/gpu/drm/i915/i915_drv.h      |   6 ++
> >  drivers/gpu/drm/i915/i915_gem.c      |   2 +-
> >  drivers/gpu/drm/i915/i915_irq.c      |   2 +
> >  drivers/gpu/drm/i915/intel_display.c | 115 +++++++++++++++++++++++++++++++++++
> >  drivers/gpu/drm/i915/intel_drv.h     |   6 ++
> >  6 files changed, 131 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
> > index 46f1dec..672c28f 100644
> > --- a/drivers/gpu/drm/i915/i915_dma.c
> > +++ b/drivers/gpu/drm/i915/i915_dma.c
> > @@ -1570,6 +1570,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
> >  	spin_lock_init(&dev_priv->backlight_lock);
> >  	spin_lock_init(&dev_priv->uncore.lock);
> >  	spin_lock_init(&dev_priv->mm.object_stat_lock);
> > +	spin_lock_init(&dev_priv->mmio_flip_lock);
> >  	dev_priv->ring_index = 0;
> >  	mutex_init(&dev_priv->dpio_lock);
> >  	mutex_init(&dev_priv->modeset_restore_lock);
> > diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> > index 4006dfe..38c0820 100644
> > --- a/drivers/gpu/drm/i915/i915_drv.h
> > +++ b/drivers/gpu/drm/i915/i915_drv.h
> > @@ -1543,6 +1543,8 @@ struct drm_i915_private {
> >  	struct i915_ums_state ums;
> >  	/* the indicator for dispatch video commands on two BSD rings */
> >  	int ring_index;
> > +	/* protects the mmio flip data */
> > +	spinlock_t mmio_flip_lock;
> >  };
> >  
> >  static inline struct drm_i915_private *to_i915(const struct drm_device *dev)
> > @@ -2209,6 +2211,7 @@ bool i915_gem_retire_requests(struct drm_device *dev);
> >  void i915_gem_retire_requests_ring(struct intel_ring_buffer *ring);
> >  int __must_check i915_gem_check_wedge(struct i915_gpu_error *error,
> >  				      bool interruptible);
> > +int i915_gem_check_olr(struct intel_ring_buffer *ring, u32 seqno);
> >  static inline bool i915_reset_in_progress(struct i915_gpu_error *error)
> >  {
> >  	return unlikely(atomic_read(&error->reset_counter)
> > @@ -2580,6 +2583,9 @@ int i915_reg_read_ioctl(struct drm_device *dev, void *data,
> >  int i915_get_reset_stats_ioctl(struct drm_device *dev, void *data,
> >  			       struct drm_file *file);
> >  
> > +void intel_notify_mmio_flip(struct drm_device *dev,
> > +			struct intel_ring_buffer *ring);
> > +
> >  /* overlay */
> >  extern struct intel_overlay_error_state *intel_overlay_capture_error_state(struct drm_device *dev);
> >  extern void intel_overlay_print_error_state(struct drm_i915_error_state_buf *e,
> > diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
> > index fa5b5ab..5b4e953 100644
> > --- a/drivers/gpu/drm/i915/i915_gem.c
> > +++ b/drivers/gpu/drm/i915/i915_gem.c
> > @@ -975,7 +975,7 @@ i915_gem_check_wedge(struct i915_gpu_error *error,
> >   * Compare seqno against outstanding lazy request. Emit a request if they are
> >   * equal.
> >   */
> > -static int
> > +int
> >  i915_gem_check_olr(struct intel_ring_buffer *ring, u32 seqno)
> >  {
> >  	int ret;
> > diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> > index b10fbde..a353693 100644
> > --- a/drivers/gpu/drm/i915/i915_irq.c
> > +++ b/drivers/gpu/drm/i915/i915_irq.c
> > @@ -1084,6 +1084,8 @@ static void notify_ring(struct drm_device *dev,
> >  
> >  	trace_i915_gem_request_complete(ring);
> >  
> > +	intel_notify_mmio_flip(dev, ring);
> > +
> 
> Hmm. How badly is this going to explode with UMS?

Hi Ville,
It seems there would be a small race between the page filp done intr and
the flip done interrupt from previous set base. But it seems to be the
case for CS flips also. In both cases, once we do the
mark_page_flip_active, there may be a window in which page flip intr
from previous set base may arrive.
Have we interpreted the race correctly? Or are we missing something
here?

Also, notify_mmio_flip is being called from notify_ring function.
Not sure of the scenario in which it may explode with UMS. Can you
please elaborate more.

I'll have next version of the patch with rest of the comments addressed.

> 
> >  	wake_up_all(&ring->irq_queue);
> >  	i915_queue_hangcheck(dev);
> >  }
> > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > index 0f8f9bc..9d190c2 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -9037,6 +9037,110 @@ err:
> >  	return ret;
> >  }
> >  
> > +static void intel_do_mmio_flip(struct drm_device *dev,
> > +			struct drm_crtc *crtc)
> 
> nit: no need to pass dev and crtc. You can dig out dev_priv from
> the crtc in the function.
> 
> Passing intel_crtc instead of drm_crtc could also avoid some extra
> variables.

> > +{
> > +	struct drm_i915_private *dev_priv = dev->dev_private;
> > +	struct drm_i915_gem_object *obj;
> > +	struct intel_framebuffer *intel_fb;
> > +	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> > +	int plane = intel_crtc->plane;
> > +
> > +	intel_mark_page_flip_active(intel_crtc);
> > +
> > +	intel_fb = to_intel_framebuffer(crtc->primary->fb);
> > +	obj = intel_fb->obj;
> 
> nit: could be done as part of the declaration
> 
> > +
> > +	/* Update the base address reg for the plane */
> 
> Useless comment.
> 
> > +	I915_WRITE(DSPSURF(plane), i915_gem_obj_ggtt_offset(obj) +
> > +			intel_crtc->dspaddr_offset);
> 
> Should probably have a POSTING_READ() here.
> 
> > +}
> > +
> > +static bool intel_postpone_flip(struct drm_i915_gem_object *obj)
> > +{
> > +	if (!obj->ring)
> > +		return false;
> > +
> > +	if (i915_seqno_passed(obj->ring->get_seqno(obj->ring, false),
> 
> Still not using lazy_coherency.
> 
> > +				obj->last_write_seqno))
> > +		return false;
> > +
> > +	i915_gem_check_olr(obj->ring, obj->last_write_seqno);
> 
> Error handling is missing.
> 
> In fact if we get an error from this I guess we should fail
> .queue_flip(). A bool return isn't sufficient to convey both
> errors and whether we need to wait for the GPU or not. I guess
> you could encode that into an int with >0,==0,<0 meaning
> different things, or you may just need to inline this stuff
> into intel_queue_mmio_flip().
> 
> > +
> > +	if (WARN_ON(!obj->ring->irq_get(obj->ring)))
> > +		return false;
> > +
> > +	return true;
> > +}
> > +
> > +void intel_notify_mmio_flip(struct drm_device *dev,
> > +			struct intel_ring_buffer *ring)
> 
> Again could just pass ring and dig out dev from it.
> 
> > +{
> > +	struct drm_i915_private *dev_priv = dev->dev_private;
> > +	struct drm_crtc *crtc;
> > +	unsigned long irq_flags;
> > +	u32 seqno;
> > +
> > +	seqno = ring->get_seqno(ring, false);
> > +
> > +	spin_lock_irqsave(&dev_priv->mmio_flip_lock, irq_flags);
> > +	for_each_crtc(dev, crtc) {
> > +		struct intel_crtc *intel_crtc;
> 
> Could use for_each_intel_crtc() to avoid some extra variables.
> 
> > +		struct intel_mmio_flip *mmio_flip_data;
> > +
> > +		intel_crtc = to_intel_crtc(crtc);
> > +		mmio_flip_data = &intel_crtc->mmio_flip_data;
> > +
> > +		if (mmio_flip_data->seqno == 0)
> > +			continue;
> > +		if (ring->id != mmio_flip_data->ring_id)
> > +			continue;
> > +
> > +		if (i915_seqno_passed(seqno, mmio_flip_data->seqno)) {
> > +			intel_do_mmio_flip(dev, crtc);
> > +			mmio_flip_data->seqno = 0;
> > +			ring->irq_put(ring);
> > +		}
> > +	}
> > +
> > +	spin_unlock_irqrestore(&dev_priv->mmio_flip_lock, irq_flags);
> > +}
> > +
> > +static int intel_queue_mmio_flip(struct drm_device *dev,
> > +			struct drm_crtc *crtc,
> > +			struct drm_framebuffer *fb,
> > +			struct drm_i915_gem_object *obj,
> > +			uint32_t flags)
> > +{
> > +	struct drm_i915_private *dev_priv = dev->dev_private;
> > +	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> > +	unsigned long irq_flags;
> > +	int ret;
> > +
> > +	ret = intel_pin_and_fence_fb_obj(dev, obj, obj->ring);
> > +	if (ret)
> > +		goto err;
> > +
> > +	if (!intel_postpone_flip(obj)) {
> > +		intel_do_mmio_flip(dev, crtc);
> > +		return 0;
> > +	}
> > +
> > +	spin_lock_irqsave(&dev_priv->mmio_flip_lock, irq_flags);
> > +	intel_crtc->mmio_flip_data.seqno = obj->last_write_seqno;
> > +	intel_crtc->mmio_flip_data.ring_id = obj->ring->id;
> > +	spin_unlock_irqrestore(&dev_priv->mmio_flip_lock, irq_flags);
> > +
> > +	/* Double check to catch cases where irq fired before
> > +	 * mmio flip data was ready
> > +	 */
> > +	intel_notify_mmio_flip(dev, obj->ring);
> > +	return 0;
> > +
> > +err:
> > +	return ret;
> > +}
> > +
> >  static int intel_gen7_queue_flip(struct drm_device *dev,
> >  				 struct drm_crtc *crtc,
> >  				 struct drm_framebuffer *fb,
> > @@ -11377,7 +11481,18 @@ static void intel_init_display(struct drm_device *dev)
> >  		break;
> >  	}
> >  
> > +	/* Using MMIO based flips starting from Gen5, for Media power well
> > +	 * residency optimization. This is not currently being used for
> > +	 * older platforms because of non-availability of flip done interrupt.
> > +	 * The other alternative of having Render ring based flip calls is
> > +	 * not being used, as the performance(FPS) of certain 3D Apps gets
> > +	 * severly affected.
> > +	 */
> > +	if (INTEL_INFO(dev)->gen >= 5)
> > +		dev_priv->display.queue_flip = intel_queue_mmio_flip;
> 
> I still think we need a module param for this, and default to CS for
> now (except maybe for VLV).
> 
> > +
> >  	intel_panel_init_backlight_funcs(dev);
> > +
> >  }
> >  
> >  /*
> > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> > index 32a74e1..7953ed6 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -351,6 +351,11 @@ struct intel_pipe_wm {
> >  	bool sprites_scaled;
> >  };
> >  
> > +struct intel_mmio_flip {
> > +	u32 seqno;
> > +	u32 ring_id;
> > +};
> > +
> >  struct intel_crtc {
> >  	struct drm_crtc base;
> >  	enum pipe pipe;
> > @@ -403,6 +408,7 @@ struct intel_crtc {
> >  	} wm;
> >  
> >  	wait_queue_head_t vbl_wait;
> > +	struct intel_mmio_flip	mmio_flip_data;
>                               ^
> 
> Should be a space, not tab.
> 
> >  };
> >  
> >  struct intel_plane_wm_parameters {
> > -- 
> > 1.8.5.1
> 

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx





[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux