[PATCH v4 0/9] drm/i915: Atomic sprites v4

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>

Another posting of the atomic sprite series. Most things are reviewed, but there
are a few patches in there for the scanline fixup that don't have r-bs.

The HSW+ situation is also still unclear. The scanline counter behaviour depends
on either the actual DDI port used (A vs. rest) or the encoder type (HDMI vs. DP).
If someone wants to help me find out which, grab [1] and run the resulting
intel_poller tool to figure out at which scanline the vblank irq triggers and/or
live surface address gets updated.

Examples from running the tool on my IVB:

# intel_poller -t iir -p 0 -b 0
...
dsl / pipe A / DEIIR[0] (pch):   1078 -   1079

This tells me that the pipe A vblank bit in DEIIR is set when the scanline
counter increments from 1078 to 1079. The display mode was 1920x1080, so this
tells us we need a +1 adjustment for the scaline counter.

# intel_poller -t surflive -p 0
...
dsl / pipe A / Surflive:   1078 -   1079

which tells me that SURFLIVE updates at the same time, as was expected.

You can also run these tests:
# ./intel_poller -t flip -p 0 -l 1078
# ./intel_poller -t pan -p 0 -l 1078

These write the DSPSURF/OFFSET register when the scanline counter reaches the target
value, and overwrite it again with the original value on the next scanline. If the
target scanline is correctly set the picture remains shifted for the duration
of the test, and if you specify any another scanline the picture should remain in
its original position the whole time.

So if someone can run these on HSW and BDW systems with both DP and HDMI outputs
on various ports we can try to figure out what the actual rule is.

Ville Syrjälä (9):
  drm/i915: Fix scanout position for real
  drm/i915: Add intel_get_crtc_scanline()
  drm/i915: Make sprite updates atomic
  drm/i915: Perform primary enable/disable atomically with sprite
    updates
  drm/i915: Add pipe update trace points
  drm/i915: Add a small adjustment to the pixel counter on interlaced
    modes
  drm/i915: Improve gen3/4 frame counter
  drm/i915: Draw a picture about video timings
  drm/i915: Fix gen2 and hsw scanline counter

 drivers/gpu/drm/i915/i915_irq.c      | 231 +++++++++++++++++++++--------------
 drivers/gpu/drm/i915/i915_trace.h    |  75 ++++++++++++
 drivers/gpu/drm/i915/intel_display.c |  50 +++++++-
 drivers/gpu/drm/i915/intel_drv.h     |   5 +
 drivers/gpu/drm/i915/intel_sprite.c  | 231 +++++++++++++++++++++++++++++------
 5 files changed, 463 insertions(+), 129 deletions(-)

-- 
1.8.3.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx





[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux