On Thu, 27 Feb 2014, Jiri Kosina wrote: > Hi, > > first things first: this is hard to bisect, because it doesn't happen > reliably and I don't really know what is the first good version, as I had > a delay in following Linus' tree. > > What happens is that after resumption from S4 (disk), Xorg session is in > complete havoc -- the windows don't redraw properly, sometimes the mouse > pointer is "jailed" on a small rectangle in the middle of the screen, etc. > > I have captured 'drm.debug=14' output of the failing resume ... I guess > this is realted to the > > *ERROR* render ring initialization failed ctl 0001f001 head 00003004 tail 00000000 start 00003000 > > as it doesn't seem to be there in case of resumption that works properly. > > Please see the dmesg from the broken case below. I encountered this again with -rc5. If there is anything I can do to help debug this, please let me know. > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Initializing cgroup subsys cpuacct > [ 0.000000] Linux version 3.14.0-rc4-00034-g6dba6ec (jkosina@noe) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #1 SMP Wed Feb 26 15:40:14 CET 2014 > [ 0.000000] Command line: root=/dev/sda2 resume=/dev/sda1 showopts pcie_aspm=force vga=0x314 drm.debug=14 log_buf_len=20M > [ 0.000000] Disabled fast string operations > [ 0.000000] e820: BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable > [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved > [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007c4a0fff] usable > [ 0.000000] BIOS-e820: [mem 0x000000007c4a1000-0x000000007c4a6fff] reserved > [ 0.000000] BIOS-e820: [mem 0x000000007c4a7000-0x000000007c5b6fff] usable > [ 0.000000] BIOS-e820: [mem 0x000000007c5b7000-0x000000007c60efff] reserved > [ 0.000000] BIOS-e820: [mem 0x000000007c60f000-0x000000007c6c5fff] usable > [ 0.000000] BIOS-e820: [mem 0x000000007c6c6000-0x000000007c6d0fff] ACPI NVS > [ 0.000000] BIOS-e820: [mem 0x000000007c6d1000-0x000000007c6d3fff] ACPI data > [ 0.000000] BIOS-e820: [mem 0x000000007c6d4000-0x000000007c6d7fff] reserved > [ 0.000000] BIOS-e820: [mem 0x000000007c6d8000-0x000000007c6dbfff] ACPI NVS > [ 0.000000] BIOS-e820: [mem 0x000000007c6dc000-0x000000007c6defff] reserved > [ 0.000000] BIOS-e820: [mem 0x000000007c6df000-0x000000007c705fff] ACPI NVS > [ 0.000000] BIOS-e820: [mem 0x000000007c706000-0x000000007c707fff] ACPI data > [ 0.000000] BIOS-e820: [mem 0x000000007c708000-0x000000007c90efff] reserved > [ 0.000000] BIOS-e820: [mem 0x000000007c90f000-0x000000007c99efff] ACPI NVS > [ 0.000000] BIOS-e820: [mem 0x000000007c99f000-0x000000007c9fefff] ACPI data > [ 0.000000] BIOS-e820: [mem 0x000000007c9ff000-0x000000007c9fffff] usable > [ 0.000000] BIOS-e820: [mem 0x000000007cc00000-0x000000007effffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved > [ 0.000000] NX (Execute Disable) protection: active > [ 0.000000] SMBIOS 2.4 present. > [ 0.000000] DMI: LENOVO 7470BN2/7470BN2, BIOS 6DET38WW (2.02 ) 12/19/2008 > [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved > [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable > [ 0.000000] No AGP bridge found > [ 0.000000] e820: last_pfn = 0x7ca00 max_arch_pfn = 0x400000000 > [ 0.000000] MTRR default type: uncachable > [ 0.000000] MTRR fixed ranges enabled: > [ 0.000000] 00000-9FFFF write-back > [ 0.000000] A0000-BFFFF uncachable > [ 0.000000] C0000-D3FFF write-protect > [ 0.000000] D4000-DBFFF uncachable > [ 0.000000] DC000-FFFFF write-protect > [ 0.000000] MTRR variable ranges enabled: > [ 0.000000] 0 base 07D000000 mask FFF000000 uncachable > [ 0.000000] 1 base 07E000000 mask FFE000000 uncachable > [ 0.000000] 2 base 000000000 mask F80000000 write-back > [ 0.000000] 3 base 07CE00000 mask FFFE00000 uncachable > [ 0.000000] 4 disabled > [ 0.000000] 5 disabled > [ 0.000000] 6 disabled > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > [ 0.000000] found SMP MP-table at [mem 0x000f73c0-0x000f73cf] mapped at [ffff8800000f73c0] > [ 0.000000] Scanning 1 areas for low memory corruption > [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 28672 > [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] > [ 0.000000] [mem 0x00000000-0x000fffff] page 4k > [ 0.000000] BRK [0x025e9000, 0x025e9fff] PGTABLE > [ 0.000000] BRK [0x025ea000, 0x025eafff] PGTABLE > [ 0.000000] BRK [0x025eb000, 0x025ebfff] PGTABLE > [ 0.000000] init_memory_mapping: [mem 0x7c200000-0x7c3fffff] > [ 0.000000] [mem 0x7c200000-0x7c3fffff] page 2M > [ 0.000000] BRK [0x025ec000, 0x025ecfff] PGTABLE > [ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7c1fffff] > [ 0.000000] [mem 0x7c000000-0x7c1fffff] page 2M > [ 0.000000] init_memory_mapping: [mem 0x78000000-0x7bffffff] > [ 0.000000] [mem 0x78000000-0x7bffffff] page 2M > [ 0.000000] init_memory_mapping: [mem 0x00100000-0x77ffffff] > [ 0.000000] [mem 0x00100000-0x001fffff] page 4k > [ 0.000000] [mem 0x00200000-0x77ffffff] page 2M > [ 0.000000] init_memory_mapping: [mem 0x7c400000-0x7c4a0fff] > [ 0.000000] [mem 0x7c400000-0x7c4a0fff] page 4k > [ 0.000000] BRK [0x025ed000, 0x025edfff] PGTABLE > [ 0.000000] init_memory_mapping: [mem 0x7c4a7000-0x7c5b6fff] > [ 0.000000] [mem 0x7c4a7000-0x7c5b6fff] page 4k > [ 0.000000] init_memory_mapping: [mem 0x7c60f000-0x7c6c5fff] > [ 0.000000] [mem 0x7c60f000-0x7c6c5fff] page 4k > [ 0.000000] BRK [0x025ee000, 0x025eefff] PGTABLE > [ 0.000000] init_memory_mapping: [mem 0x7c9ff000-0x7c9fffff] > [ 0.000000] [mem 0x7c9ff000-0x7c9fffff] page 4k > [ 0.000000] log_buf_len: 33554432 > [ 0.000000] early log buf free: 256536(97%) > [ 0.000000] RAMDISK: [mem 0x35713000-0x37feffff] > [ 0.000000] ACPI: RSDP 00000000000f7380 000024 (v02 LENOVO) > [ 0.000000] ACPI: XSDT 000000007c97bdcc 00009C (v01 LENOVO TP-6D 00002020 LTP 00000000) > [ 0.000000] ACPI: FACP 000000007c97bf00 0000F4 (v03 LENOVO TP-6D 00002020 LNVO 00000001) > [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20131218/tbfadt-603) > [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20131218/tbfadt-684) > [ 0.000000] ACPI: DSDT 000000007c97c2f4 00D889 (v01 LENOVO TP-6D 00002020 MSFT 03000000) > [ 0.000000] ACPI: FACS 000000007c98e000 000040 > [ 0.000000] ACPI: SSDT 000000007c97c0b4 000240 (v01 LENOVO TP-6D 00002020 MSFT 03000000) > [ 0.000000] ACPI: ECDT 000000007c989b7d 000052 (v01 LENOVO TP-6D 00002020 LNVO 00000001) > [ 0.000000] ACPI: APIC 000000007c989bcf 000078 (v01 LENOVO TP-6D 00002020 LNVO 00000001) > [ 0.000000] ACPI: MCFG 000000007c989c47 00003C (v01 LENOVO TP-6D 00002020 LNVO 00000001) > [ 0.000000] ACPI: HPET 000000007c989c83 000038 (v01 LENOVO TP-6D 00002020 LNVO 00000001) > [ 0.000000] ACPI: SLIC 000000007c989dc2 000176 (v01 LENOVO TP-6D 00002020 LTP 00000000) > [ 0.000000] ACPI: BOOT 000000007c989f38 000028 (v01 LENOVO TP-6D 00002020 LTP 00000001) > [ 0.000000] ACPI: ASF! 000000007c989f60 0000A0 (v16 LENOVO TP-6D 00002020 PTL 00000001) > [ 0.000000] ACPI: SSDT 000000007c98d203 00055F (v01 LENOVO TP-6D 00002020 INTL 20050513) > [ 0.000000] ACPI: TCPA 000000007c707000 000032 (v00 00000000 00000000) > [ 0.000000] ACPI: DMAR 000000007c706000 000120 (v01 ? 00000001 00000000) > [ 0.000000] ACPI: SSDT 000000007c6d3000 000655 (v01 PmRef CpuPm 00003000 INTL 20050624) > [ 0.000000] ACPI: SSDT 000000007c6d2000 000274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624) > [ 0.000000] ACPI: SSDT 000000007c6d1000 000242 (v01 PmRef ApTst 00003000 INTL 20050624) > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] No NUMA configuration found > [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007c9fffff] > [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7c9fffff] > [ 0.000000] NODE_DATA [mem 0x7c6b0000-0x7c6c4fff] > [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880077c00000-ffff8800797fffff] on node 0 > [ 0.000000] Zone ranges: > [ 0.000000] DMA [mem 0x00001000-0x00ffffff] > [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] > [ 0.000000] Normal empty > [ 0.000000] Movable zone start for each node > [ 0.000000] Early memory node ranges > [ 0.000000] node 0: [mem 0x00001000-0x0009dfff] > [ 0.000000] node 0: [mem 0x00100000-0x7c4a0fff] > [ 0.000000] node 0: [mem 0x7c4a7000-0x7c5b6fff] > [ 0.000000] node 0: [mem 0x7c60f000-0x7c6c5fff] > [ 0.000000] node 0: [mem 0x7c9ff000-0x7c9fffff] > [ 0.000000] On node 0 totalpages: 509446 > [ 0.000000] DMA zone: 56 pages used for memmap > [ 0.000000] DMA zone: 22 pages reserved > [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 > [ 0.000000] DMA32 zone: 6923 pages used for memmap > [ 0.000000] DMA32 zone: 505449 pages, LIFO batch:31 > [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ2 used by override. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 > [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs > [ 0.000000] nr_irqs_gsi: 40 > [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] > [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] > [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff] > [ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff] > [ 0.000000] PM: Registered nosave memory: [mem 0x7c4a1000-0x7c4a6fff] > [ 0.000000] PM: Registered nosave memory: [mem 0x7c5b7000-0x7c60efff] > [ 0.000000] PM: Registered nosave memory: [mem 0x7c6c6000-0x7c6d0fff] > [ 0.000000] PM: Registered nosave memory: [mem 0x7c6d1000-0x7c6d3fff] > [ 0.000000] PM: Registered nosave memory: [mem 0x7c6d4000-0x7c6d7fff] > [ 0.000000] PM: Registered nosave memory: [mem 0x7c6d8000-0x7c6dbfff] > [ 0.000000] PM: Registered nosave memory: [mem 0x7c6dc000-0x7c6defff] > [ 0.000000] PM: Registered nosave memory: [mem 0x7c6df000-0x7c705fff] > [ 0.000000] PM: Registered nosave memory: [mem 0x7c706000-0x7c707fff] > [ 0.000000] PM: Registered nosave memory: [mem 0x7c708000-0x7c90efff] > [ 0.000000] PM: Registered nosave memory: [mem 0x7c90f000-0x7c99efff] > [ 0.000000] PM: Registered nosave memory: [mem 0x7c99f000-0x7c9fefff] > [ 0.000000] e820: [mem 0x7f000000-0xdfffffff] available for PCI devices > [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007a200000 s83904 r8192 d22592 u524288 > [ 0.000000] pcpu-alloc: s83904 r8192 d22592 u524288 alloc=1*2097152 > [ 0.000000] pcpu-alloc: [0] 0 1 2 3 > [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 502445 > [ 0.000000] Policy zone: DMA32 > [ 0.000000] Kernel command line: root=/dev/sda2 resume=/dev/sda1 showopts pcie_aspm=force vga=0x314 drm.debug=14 log_buf_len=20M > [ 0.000000] PCIe ASPM is forcibly enabled > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) > [ 0.000000] Checking aperture... > [ 0.000000] No AGP bridge found > [ 0.000000] Memory: 1910780K/2037784K available (5873K kernel code, 793K rwdata, 2684K rodata, 1460K init, 9908K bss, 127004K reserved) > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. > [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. > [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 > [ 0.000000] NR_IRQS:33024 nr_irqs:712 16 > [ 0.000000] ACPI: Core revision 20131218 > [ 0.000000] kmemleak: Kernel memory leak detector disabled > [ 0.000000] ACPI: All ACPI Tables successfully acquired > [ 0.000000] Console: colour dummy device 80x25 > [ 0.000000] console [tty0] enabled > [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar > [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 > [ 0.000000] ... MAX_LOCK_DEPTH: 48 > [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 > [ 0.000000] ... CLASSHASH_SIZE: 4096 > [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 > [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 > [ 0.000000] ... CHAINHASH_SIZE: 16384 > [ 0.000000] memory used by lock dependency info: 5855 kB > [ 0.000000] per task-struct memory footprint: 1920 bytes > [ 0.000000] kmemleak: Early log buffer exceeded (27536), please increase DEBUG_KMEMLEAK_EARLY_LOG_SIZE > [ 0.000000] hpet clockevent registered > [ 0.000000] tsc: Fast TSC calibration using PIT > [ 0.000000] tsc: Detected 1862.024 MHz processor > [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.04 BogoMIPS (lpj=7448096) > [ 0.004015] pid_max: default: 32768 minimum: 301 > [ 0.008071] Security Framework initialized > [ 0.009022] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) > [ 0.010484] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) > [ 0.011004] Mount-cache hash table entries: 256 > [ 0.012255] Initializing cgroup subsys devices > [ 0.012286] Initializing cgroup subsys freezer > [ 0.012308] Initializing cgroup subsys net_cls > [ 0.012315] Initializing cgroup subsys blkio > [ 0.012321] Initializing cgroup subsys perf_event > [ 0.012446] Disabled fast string operations > [ 0.012456] CPU: Physical Processor ID: 0 > [ 0.012461] CPU: Processor Core ID: 0 > [ 0.012466] mce: CPU supports 6 MCE banks > [ 0.012479] CPU0: Thermal monitoring enabled (TM2) > [ 0.012491] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 > [ 0.012491] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 > [ 0.012491] tlb_flushall_shift: -1 > [ 0.012632] Freeing SMP alternatives memory: 20K (ffffffff81c35000 - ffffffff81c3a000) > [ 0.013558] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.053259] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz (fam: 06, model: 17, stepping: 06) > [ 0.056000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. > [ 0.056000] ... version: 2 > [ 0.056000] ... bit width: 40 > [ 0.056000] ... generic registers: 2 > [ 0.056000] ... value mask: 000000ffffffffff > [ 0.056000] ... max period: 000000007fffffff > [ 0.056000] ... fixed-purpose events: 3 > [ 0.056000] ... event mask: 0000000700000003 > [ 0.056000] x86: Booting SMP configuration: > [ 0.056000] .... node #0, CPUs: #1 > [ 0.008000] Disabled fast string operations > [ 0.068150] x86: Booted up 1 node, 2 CPUs > [ 0.068165] smpboot: Total of 2 processors activated (7448.09 BogoMIPS) > [ 0.072934] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. > [ 0.073378] devtmpfs: initialized > [ 0.084092] PM: Registering ACPI NVS region [mem 0x7c6c6000-0x7c6d0fff] (45056 bytes) > [ 0.084107] PM: Registering ACPI NVS region [mem 0x7c6d8000-0x7c6dbfff] (16384 bytes) > [ 0.084117] PM: Registering ACPI NVS region [mem 0x7c6df000-0x7c705fff] (159744 bytes) > [ 0.084145] PM: Registering ACPI NVS region [mem 0x7c90f000-0x7c99efff] (589824 bytes) > [ 0.086049] regulator-dummy: no parameters > [ 0.086264] RTC time: 10:48:58, date: 02/27/14 > [ 0.086635] NET: Registered protocol family 16 > [ 0.087762] cpuidle: using governor ladder > [ 0.087769] cpuidle: using governor menu > [ 0.087844] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it > [ 0.087865] ACPI: bus type PCI registered > [ 0.088398] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) > [ 0.088409] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820 > [ 0.101661] PCI: Using configuration type 1 for base access > [ 0.109876] bio: create slab <bio-0> at 0 > [ 0.109876] ACPI: Added _OSI(Module Device) > [ 0.109876] ACPI: Added _OSI(Processor Device) > [ 0.109876] ACPI: Added _OSI(3.0 _SCP Extensions) > [ 0.109876] ACPI: Added _OSI(Processor Aggregator Device) > [ 0.121292] ACPI : EC: EC description table is found, configuring boot EC > [ 0.147275] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored > [ 0.169692] ACPI: SSDT 000000007c6d6c20 0002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) > [ 0.172004] ACPI: Dynamic OEM Table Load: > [ 0.172013] ACPI: SSDT (null) 0002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) > [ 0.172501] ACPI: SSDT 000000007c6d4020 00087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624) > [ 0.174961] ACPI: Dynamic OEM Table Load: > [ 0.174969] ACPI: SSDT (null) 00087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624) > [ 0.197067] ACPI: SSDT 000000007c6d5ca0 0001CF (v01 PmRef ApIst 00003000 INTL 20050624) > [ 0.199486] ACPI: Dynamic OEM Table Load: > [ 0.199494] ACPI: SSDT (null) 0001CF (v01 PmRef ApIst 00003000 INTL 20050624) > [ 0.208307] ACPI: SSDT 000000007c6d5f20 00008D (v01 PmRef ApCst 00003000 INTL 20050624) > [ 0.210637] ACPI: Dynamic OEM Table Load: > [ 0.210645] ACPI: SSDT (null) 00008D (v01 PmRef ApCst 00003000 INTL 20050624) > [ 0.224574] ACPI: Interpreter enabled > [ 0.224589] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580) > [ 0.224607] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580) > [ 0.224672] ACPI: (supports S0 S3 S4 S5) > [ 0.224679] ACPI: Using IOAPIC for interrupt routing > [ 0.224808] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug > [ 0.228224] ACPI: ACPI Dock Station Driver: 3 docks/bays found > [ 0.268409] ACPI: Power Resource [PUBS] (on) > [ 0.293038] ACPI: \_PR_.CPU2: failed to get CPU APIC ID. > [ 0.293066] ACPI: \_PR_.CPU3: failed to get CPU APIC ID. > [ 0.293556] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) > [ 0.294039] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) > [ 0.294518] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) > [ 0.294996] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) > [ 0.295474] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) > [ 0.295951] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) > [ 0.296450] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) > [ 0.296930] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) > [ 0.297052] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) > [ 0.297068] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] > [ 0.299307] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] > [ 0.299429] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge > [ 0.299834] PCI host bridge to bus 0000:00 > [ 0.299844] pci_bus 0000:00: root bus resource [bus 00-ff] > [ 0.299852] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] > [ 0.299860] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] > [ 0.299868] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] > [ 0.299875] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] > [ 0.299883] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] > [ 0.299890] pci_bus 0000:00: root bus resource [mem 0x7f000000-0xfebfffff] > [ 0.299954] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000 > [ 0.300540] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000 > [ 0.300567] pci 0000:00:02.0: reg 0x10: [mem 0xf2000000-0xf23fffff 64bit] > [ 0.300583] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] > [ 0.300594] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x1807] > [ 0.301192] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000 > [ 0.301214] pci 0000:00:02.1: reg 0x10: [mem 0xf2400000-0xf24fffff 64bit] > [ 0.301757] pci 0000:00:03.0: [8086:2a44] type 00 class 0x078000 > [ 0.301786] pci 0000:00:03.0: reg 0x10: [mem 0xf2826800-0xf282680f 64bit] > [ 0.301881] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold > [ 0.302455] pci 0000:00:03.2: [8086:2a46] type 00 class 0x010185 > [ 0.302480] pci 0000:00:03.2: reg 0x10: [io 0x1828-0x182f] > [ 0.302492] pci 0000:00:03.2: reg 0x14: [io 0x180c-0x180f] > [ 0.302504] pci 0000:00:03.2: reg 0x18: [io 0x1820-0x1827] > [ 0.302517] pci 0000:00:03.2: reg 0x1c: [io 0x1808-0x180b] > [ 0.302529] pci 0000:00:03.2: reg 0x20: [io 0x1810-0x181f] > [ 0.303066] pci 0000:00:03.3: [8086:2a47] type 00 class 0x070002 > [ 0.303090] pci 0000:00:03.3: reg 0x10: [io 0x1830-0x1837] > [ 0.303102] pci 0000:00:03.3: reg 0x14: [mem 0xf2624000-0xf2624fff] > [ 0.303722] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000 > [ 0.303759] pci 0000:00:19.0: reg 0x10: [mem 0xf2600000-0xf261ffff] > [ 0.303776] pci 0000:00:19.0: reg 0x14: [mem 0xf2625000-0xf2625fff] > [ 0.303792] pci 0000:00:19.0: reg 0x18: [io 0x1840-0x185f] > [ 0.303927] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold > [ 0.304193] pci 0000:00:19.0: System wakeup disabled by ACPI > [ 0.304595] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 > [ 0.304678] pci 0000:00:1a.0: reg 0x20: [io 0x1860-0x187f] > [ 0.305020] pci 0000:00:1a.0: System wakeup disabled by ACPI > [ 0.305431] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 > [ 0.305515] pci 0000:00:1a.1: reg 0x20: [io 0x1880-0x189f] > [ 0.306080] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 > [ 0.306164] pci 0000:00:1a.2: reg 0x20: [io 0x18a0-0x18bf] > [ 0.306478] pci 0000:00:1a.2: System wakeup disabled by ACPI > [ 0.306898] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 > [ 0.306936] pci 0000:00:1a.7: reg 0x10: [mem 0xf2826c00-0xf2826fff] > [ 0.307101] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold > [ 0.307302] pci 0000:00:1a.7: System wakeup disabled by ACPI > [ 0.307716] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 > [ 0.307747] pci 0000:00:1b.0: reg 0x10: [mem 0xf2620000-0xf2623fff 64bit] > [ 0.307909] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > [ 0.308142] pci 0000:00:1b.0: System wakeup disabled by ACPI > [ 0.308552] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 > [ 0.308719] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > [ 0.308925] pci 0000:00:1c.0: System wakeup disabled by ACPI > [ 0.309329] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400 > [ 0.309496] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold > [ 0.309700] pci 0000:00:1c.1: System wakeup disabled by ACPI > [ 0.310106] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400 > [ 0.310272] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold > [ 0.310478] pci 0000:00:1c.3: System wakeup disabled by ACPI > [ 0.310891] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 > [ 0.310974] pci 0000:00:1d.0: reg 0x20: [io 0x18c0-0x18df] > [ 0.311288] pci 0000:00:1d.0: System wakeup disabled by ACPI > [ 0.311693] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 > [ 0.311777] pci 0000:00:1d.1: reg 0x20: [io 0x18e0-0x18ff] > [ 0.312352] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 > [ 0.312435] pci 0000:00:1d.2: reg 0x20: [io 0x1c00-0x1c1f] > [ 0.313026] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 > [ 0.313063] pci 0000:00:1d.7: reg 0x10: [mem 0xf2827000-0xf28273ff] > [ 0.313227] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > [ 0.313440] pci 0000:00:1d.7: System wakeup disabled by ACPI > [ 0.313843] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 > [ 0.314417] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100 > [ 0.315107] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601 > [ 0.315149] pci 0000:00:1f.2: reg 0x10: [io 0x1c48-0x1c4f] > [ 0.315165] pci 0000:00:1f.2: reg 0x14: [io 0x183c-0x183f] > [ 0.315182] pci 0000:00:1f.2: reg 0x18: [io 0x1c40-0x1c47] > [ 0.315198] pci 0000:00:1f.2: reg 0x1c: [io 0x1838-0x183b] > [ 0.315214] pci 0000:00:1f.2: reg 0x20: [io 0x1c20-0x1c3f] > [ 0.315231] pci 0000:00:1f.2: reg 0x24: [mem 0xf2826000-0xf28267ff] > [ 0.315337] pci 0000:00:1f.2: PME# supported from D3hot > [ 0.315910] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 > [ 0.315942] pci 0000:00:1f.3: reg 0x10: [mem 0xf2827400-0xf28274ff 64bit] > [ 0.315985] pci 0000:00:1f.3: reg 0x20: [io 0x1c60-0x1c7f] > [ 0.316788] pci 0000:00:1c.0: PCI bridge to [bus 02] > [ 0.317226] pci 0000:03:00.0: [8086:4237] type 00 class 0x028000 > [ 0.317403] pci 0000:03:00.0: reg 0x10: [mem 0xf2500000-0xf2501fff 64bit] > [ 0.318100] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold > [ 0.318805] pci 0000:00:1c.1: PCI bridge to [bus 03] > [ 0.318821] pci 0000:00:1c.1: bridge window [mem 0xf2500000-0xf25fffff] > [ 0.319103] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] > [ 0.319115] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] > [ 0.319122] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff] > [ 0.319133] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref] > [ 0.319452] pci 0000:00:1e.0: PCI bridge to [bus 0d] (subtractive decode) > [ 0.319477] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) > [ 0.319480] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) > [ 0.319484] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) > [ 0.319487] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) > [ 0.319490] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) > [ 0.319495] pci 0000:00:1e.0: bridge window [mem 0x7f000000-0xfebfffff] (subtractive decode) > [ 0.319569] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) > [ 0.325040] ACPI: Enabled 3 GPEs in block 00 to 3F > [ 0.325483] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 > [ 0.325944] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none > [ 0.325944] vgaarb: loaded > [ 0.325944] vgaarb: bridge control possible 0000:00:02.0 > [ 0.325944] SCSI subsystem initialized > [ 0.328116] libata version 3.00 loaded. > [ 0.328582] PCI: Using ACPI for IRQ routing > [ 0.331536] PCI: pci_cache_line_size set to 64 bytes > [ 0.331700] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] > [ 0.331711] e820: reserve RAM buffer [mem 0x7c4a1000-0x7fffffff] > [ 0.331717] e820: reserve RAM buffer [mem 0x7c5b7000-0x7fffffff] > [ 0.331721] e820: reserve RAM buffer [mem 0x7c6c6000-0x7fffffff] > [ 0.331725] e820: reserve RAM buffer [mem 0x7ca00000-0x7fffffff] > [ 0.333137] NetLabel: Initializing > [ 0.333144] NetLabel: domain hash size = 128 > [ 0.333149] NetLabel: protocols = UNLABELED CIPSOv4 > [ 0.333254] NetLabel: unlabeled traffic allowed by default > [ 0.333306] HPET: 4 timers in total, 0 timers will be used for per-cpu timer > [ 0.333320] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 > [ 0.333331] hpet0: 4 comparators, 64-bit 14.318180 MHz counter > [ 0.335428] Switched to clocksource hpet > [ 0.365494] pnp: PnP ACPI init > [ 0.365622] ACPI: bus type PNP registered > [ 0.388195] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved > [ 0.388207] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved > [ 0.388217] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved > [ 0.388226] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved > [ 0.388235] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved > [ 0.388244] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved > [ 0.388254] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved > [ 0.388263] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved > [ 0.388273] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved > [ 0.388282] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved > [ 0.388292] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved > [ 0.388301] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved > [ 0.388311] system 00:00: [mem 0x00100000-0x7effffff] could not be reserved > [ 0.388321] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved > [ 0.388330] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved > [ 0.388367] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) > [ 0.409294] system 00:01: [io 0x164e-0x164f] has been reserved > [ 0.409306] system 00:01: [io 0x1000-0x107f] could not be reserved > [ 0.409314] system 00:01: [io 0x1180-0x11ff] has been reserved > [ 0.409323] system 00:01: [io 0x0800-0x080f] has been reserved > [ 0.409332] system 00:01: [io 0x15e0-0x15ef] has been reserved > [ 0.409340] system 00:01: [io 0x1600-0x1641] has been reserved > [ 0.409348] system 00:01: [io 0x1600-0x161b] has been reserved > [ 0.409357] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved > [ 0.409366] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved > [ 0.409375] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved > [ 0.409384] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved > [ 0.409393] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved > [ 0.409401] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved > [ 0.409414] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.409747] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) > [ 0.409782] pnp 00:03: [dma 4] > [ 0.409981] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) > [ 0.410212] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) > [ 0.410448] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) > [ 0.410699] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) > [ 0.410934] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) > [ 0.411175] pnp 00:08: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active) > [ 0.431962] pnp 00:09: Plug and Play ACPI device, IDs PNP0c31 (active) > [ 0.432991] pnp: PnP ACPI: found 10 devices > [ 0.432998] ACPI: bus type PNP unregistered > [ 0.453928] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 > [ 0.453935] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 > [ 0.453940] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 > [ 0.453956] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 > [ 0.453961] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 > [ 0.453998] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 > [ 0.454002] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 > [ 0.454005] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 > [ 0.454008] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 > [ 0.454011] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 > [ 0.454021] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7f000000-0x7f1fffff] > [ 0.454033] pci 0000:00:1c.0: BAR 15: assigned [mem 0x7f200000-0x7f3fffff 64bit pref] > [ 0.454045] pci 0000:00:1c.1: BAR 15: assigned [mem 0x7f400000-0x7f5fffff 64bit pref] > [ 0.454056] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff] > [ 0.454065] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff] > [ 0.454076] pci 0000:00:1c.0: PCI bridge to [bus 02] > [ 0.454085] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] > [ 0.454098] pci 0000:00:1c.0: bridge window [mem 0x7f000000-0x7f1fffff] > [ 0.454109] pci 0000:00:1c.0: bridge window [mem 0x7f200000-0x7f3fffff 64bit pref] > [ 0.454126] pci 0000:00:1c.1: PCI bridge to [bus 03] > [ 0.454134] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] > [ 0.454147] pci 0000:00:1c.1: bridge window [mem 0xf2500000-0xf25fffff] > [ 0.454158] pci 0000:00:1c.1: bridge window [mem 0x7f400000-0x7f5fffff 64bit pref] > [ 0.454174] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] > [ 0.454182] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] > [ 0.454195] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff] > [ 0.454206] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref] > [ 0.454222] pci 0000:00:1e.0: PCI bridge to [bus 0d] > [ 0.454246] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] > [ 0.454249] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] > [ 0.454252] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] > [ 0.454255] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] > [ 0.454258] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] > [ 0.454261] pci_bus 0000:00: resource 9 [mem 0x7f000000-0xfebfffff] > [ 0.454264] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] > [ 0.454267] pci_bus 0000:02: resource 1 [mem 0x7f000000-0x7f1fffff] > [ 0.454271] pci_bus 0000:02: resource 2 [mem 0x7f200000-0x7f3fffff 64bit pref] > [ 0.454274] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff] > [ 0.454277] pci_bus 0000:03: resource 1 [mem 0xf2500000-0xf25fffff] > [ 0.454280] pci_bus 0000:03: resource 2 [mem 0x7f400000-0x7f5fffff 64bit pref] > [ 0.454283] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff] > [ 0.454286] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff] > [ 0.454289] pci_bus 0000:05: resource 2 [mem 0xf2900000-0xf29fffff 64bit pref] > [ 0.454292] pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7] > [ 0.454295] pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff] > [ 0.454298] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff] > [ 0.454301] pci_bus 0000:0d: resource 7 [mem 0x000d4000-0x000d7fff] > [ 0.454304] pci_bus 0000:0d: resource 8 [mem 0x000d8000-0x000dbfff] > [ 0.454307] pci_bus 0000:0d: resource 9 [mem 0x7f000000-0xfebfffff] > [ 0.454497] NET: Registered protocol family 2 > [ 0.455147] TCP established hash table entries: 16384 (order: 5, 131072 bytes) > [ 0.455666] TCP bind hash table entries: 16384 (order: 8, 1048576 bytes) > [ 0.457086] TCP: Hash tables configured (established 16384 bind 16384) > [ 0.457494] TCP: reno registered > [ 0.457567] UDP hash table entries: 1024 (order: 5, 163840 bytes) > [ 0.457825] UDP-Lite hash table entries: 1024 (order: 5, 163840 bytes) > [ 0.458441] NET: Registered protocol family 1 > [ 0.458478] pci 0000:00:02.0: Boot video device > [ 0.463235] PCI: CLS 64 bytes, default 64 > [ 0.463989] Unpacking initramfs... > [ 1.391375] Freeing initrd memory: 41844K (ffff880035713000 - ffff880037ff0000) > [ 1.391447] Simple Boot Flag at 0x35 set to 0x1 > [ 1.392993] Scanning for low memory corruption every 60 seconds > [ 1.395274] futex hash table entries: 1024 (order: 5, 131072 bytes) > [ 1.395470] audit: initializing netlink subsys (disabled) > [ 1.395640] audit: type=2000 audit(1393498139.392:1): initialized > [ 1.433502] bounce pool size: 64 pages > [ 1.433525] HugeTLB registered 2 MB page size, pre-allocated 0 pages > [ 1.434317] VFS: Disk quotas dquot_6.5.2 > [ 1.434383] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > [ 1.435520] msgmni has been set to 3813 > [ 1.436824] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) > [ 1.436979] io scheduler noop registered > [ 1.436986] io scheduler deadline registered > [ 1.437042] io scheduler cfq registered (default) > [ 1.439457] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X > [ 1.440488] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X > [ 1.441409] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X > [ 1.442245] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt > [ 1.442265] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded > [ 1.442380] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt > [ 1.442388] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt > [ 1.442400] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded > [ 1.442503] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt > [ 1.442515] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded > [ 1.443065] vesafb: mode is 800x600x16, linelength=1600, pages=33 > [ 1.443072] vesafb: scrolling: redraw > [ 1.443078] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 > [ 1.443568] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004500000, using 1875k, total 32704k > [ 1.453086] Console: switching to colour frame buffer device 100x37 > [ 1.461502] fb0: VESA VGA frame buffer device > [ 1.461719] intel_idle: does not run on family 6 model 23 > [ 1.461833] GHES: HEST is not enabled! > [ 1.462164] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled > [ 1.498771] 0000:00:03.3: ttyS4 at I/O 0x1830 (irq = 17, base_baud = 115200) is a 16550A > [ 1.500142] Non-volatile memory driver v1.3 > [ 1.500255] Linux agpgart interface v0.103 > [ 1.500883] agpgart-intel 0000:00:00.0: Intel GM45 Chipset > [ 1.501186] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable > [ 1.503811] agpgart-intel 0000:00:00.0: detected 32768K stolen memory > [ 1.504490] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 > [ 1.505325] ahci 0000:00:1f.2: version 3.0 > [ 1.505749] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X > [ 1.506023] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled > [ 1.506227] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode > [ 1.510614] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs > [ 1.519809] scsi0 : ahci > [ 1.525060] scsi1 : ahci > [ 1.529946] scsi2 : ahci > [ 1.534746] scsi3 : ahci > [ 1.539233] ata1: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826100 irq 43 > [ 1.543353] ata2: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826180 irq 43 > [ 1.547365] ata3: DUMMY > [ 1.551262] ata4: DUMMY > [ 1.555724] libphy: Fixed MDIO Bus: probed > [ 1.559506] PPP generic driver version 2.4.2 > [ 1.563503] PPP BSD Compression module registered > [ 1.567204] PPP Deflate Compression module registered > [ 1.570955] PPP MPPE Compression module registered > [ 1.574726] NET: Registered protocol family 24 > [ 1.578637] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 > [ 1.592880] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 1.596845] serio: i8042 AUX port at 0x60,0x64 irq 12 > [ 1.601265] mousedev: PS/2 mouse device common for all mice > [ 1.605608] rtc_cmos 00:06: RTC can wake from S4 > [ 1.610121] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 > [ 1.614017] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs > [ 1.618024] hidraw: raw HID events driver (C) Jiri Kosina > [ 1.622296] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 > [ 1.622697] TCP: cubic registered > [ 1.630199] NET: Registered protocol family 10 > [ 1.637077] registered taskstats version 1 > [ 1.642462] Magic number: 2:850:831 > [ 1.646281] rtc_cmos 00:06: setting system clock to 2014-02-27 10:49:00 UTC (1393498140) > [ 1.651057] PM: Checking hibernation image partition /dev/sda1 > [ 1.872044] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 1.876531] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded > [ 1.876535] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out > [ 1.880486] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out > [ 1.884638] ata1.00: ATA-7: INTEL SSDSA2M080G2GN, 2CV102HA, max UDMA/133 > [ 1.888569] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32) > [ 1.893162] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded > [ 1.893167] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out > [ 1.897189] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out > [ 1.901393] ata1.00: configured for UDMA/133 > [ 1.906268] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5 > [ 1.911661] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) > [ 1.916060] sd 0:0:0:0: [sda] Write Protect is off > [ 1.920201] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 1.920294] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 1.930972] sda: sda1 sda2 > [ 1.937288] sd 0:0:0:0: [sda] Attached SCSI disk > [ 2.103269] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 > [ 2.232055] ata2: SATA link down (SStatus 0 SControl 300) > [ 2.392082] tsc: Refined TSC clocksource calibration: 1861.999 MHz > [ 2.479441] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 > [ 2.502161] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input2 > [ 2.511426] PM: Hibernation image partition 8:1 present > [ 2.511429] PM: Looking for hibernation image. > [ 2.512039] PM: Image not found (code -22) > [ 2.512042] PM: Hibernation image not present or could not be loaded. > [ 2.514720] Freeing unused kernel memory: 1460K (ffffffff81ac8000 - ffffffff81c35000) > [ 2.519756] Write protecting the kernel read-only data: 10240k > [ 2.526122] Freeing unused kernel memory: 260K (ffff8800015bf000 - ffff880001600000) > [ 2.536450] Freeing unused kernel memory: 1412K (ffff88000189f000 - ffff880001a00000) > [ 2.616830] thermal LNXTHERM:00: registered as thermal_zone0 > [ 2.621829] ACPI: Thermal Zone [THM0] (48 C) > [ 2.650054] thermal LNXTHERM:01: registered as thermal_zone1 > [ 2.655083] ACPI: Thermal Zone [THM1] (48 C) > [ 2.667588] scsi4 : ata_generic > [ 2.673095] scsi5 : ata_generic > [ 2.678232] ata5: PATA max UDMA/100 cmd 0x1828 ctl 0x180c bmdma 0x1810 irq 18 > [ 2.682993] ata6: PATA max UDMA/100 cmd 0x1820 ctl 0x1808 bmdma 0x1818 irq 18 > [ 3.034744] Monitor-Mwait will be used to enter C-1 state > [ 3.034826] Monitor-Mwait will be used to enter C-2 state > [ 3.034852] Monitor-Mwait will be used to enter C-3 state > [ 3.034873] tsc: Marking TSC unstable due to TSC halts in idle > [ 3.039783] ACPI: acpi_idle registered with cpuidle > [ 3.059358] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found > [ 3.080260] systemd-udevd[109]: starting version 195 > [ 3.137107] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 > [ 3.148166] ACPI: Lid Switch [LID] > [ 3.153410] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4 > [ 3.165923] ACPI: Sleep Button [SLPB] > [ 3.171334] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 > [ 3.181825] ACPI: Power Button [PWRF] > [ 3.202682] [drm] Initialized drm 1.1.0 20060810 > [ 3.223135] ACPI: bus type USB registered > [ 3.229050] usbcore: registered new interface driver usbfs > [ 3.235023] usbcore: registered new interface driver hub > [ 3.246994] usbcore: registered new device driver usb > [ 3.265254] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 3.278450] [drm:i915_dump_device_info], i915 device info: gen=4, pciid=0x2a42 flags=is_mobile,need_gfx_hws,is_g4x,has_fbc,has_pipe_cxsr,has_hotplug,supports_tv, > [ 3.278637] [drm:intel_detect_pch], No PCH found? > [ 3.278642] [drm] Memory usable by graphics device = 2048M > [ 3.283500] [drm:i915_gem_gtt_init], GMADR size = 256M > [ 3.283503] [drm:i915_gem_gtt_init], GTT stolen size = 32M > [ 3.283530] checking generic (d0000000 1ff0000) vs hw (d0000000 10000000) > [ 3.283533] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver > [ 3.288657] Console: switching to colour dummy device 80x25 > [ 3.301341] uhci_hcd: USB Universal Host Controller Interface driver > [ 3.358049] [drm:intel_opregion_setup], graphic opregion physical addr: 0x7c98b1f3 > [ 3.358068] [drm:intel_opregion_setup], Public ACPI methods supported > [ 3.358070] [drm:intel_opregion_setup], SWSCI supported > [ 3.380252] [drm:swsci_setup], SWSCI BIOS requested (00010673) SBCB callbacks that are not supported (00080673) > [ 3.380258] [drm:swsci_setup], SWSCI GBDA callbacks 00000cf3, SBCB callbacks 00010673 > [ 3.380260] [drm:intel_opregion_setup], ASLE supported > [ 3.380491] i915 0000:00:02.0: irq 44 for MSI/MSI-X > [ 3.380531] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). > [ 3.380541] [drm] Driver supports precise vblank timestamp query. > [ 3.380549] [drm:init_vbt_defaults], Set default to SSC at 100000 kHz > [ 3.380552] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT CANTIGA d > [ 3.380556] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 100000 display_clock_mode 0 fdi_rx_polarity_inverted 0 > [ 3.380559] [drm:parse_general_definitions], crt_ddc_bus_pin: 2 > [ 3.380564] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: > [ 3.380569] [drm:drm_mode_debug_printmodeline], Modeline 0:"1440x900" 0 74080 1440 1464 1480 1600 900 903 909 926 0x8 0xa > [ 3.380572] [drm:parse_lfp_panel_data], VBT initial LVDS value 42300300 > [ 3.380575] [drm:parse_lfp_backlight], VBT backlight PWM modulation frequency 165 Hz, active high, min brightness 4, level 0 > [ 3.380579] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables: > [ 3.380583] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa > [ 3.380586] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT > [ 3.380590] [drm:parse_mipi], No MIPI BDB found > [ 3.380644] [drm:intel_dsm_pci_probe], no _DSM method for intel device > [ 3.380742] [drm:i915_gem_init_stolen], found 33554432 bytes of stolen memory at 7d000000 > [ 3.381150] [drm:intel_modeset_init], 2 display pipes available. > [ 3.381236] [drm:intel_modeset_init], pipe A sprite A init failed: -19 > [ 3.381258] [drm:intel_modeset_init], pipe B sprite B init failed: -19 > [ 3.381268] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem > [ 3.464136] [drm:intel_lvds_init], using preferred mode from EDID: > [ 3.464143] [drm:drm_mode_debug_printmodeline], Modeline 8:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa > [ 3.464150] [drm:intel_lvds_init], detected single-link lvds configuration > [ 3.464983] [drm:intel_panel_setup_backlight], backlight initialized, enabled, brightness 3211215/3211215, sysfs interface registered > [ 3.465296] [drm:intel_setup_outputs], probing SDVOB > [ 3.465305] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1 > [ 3.478161] [drm:intel_sdvo_read_byte], i2c transfer returned -6 > [ 3.478165] [drm:intel_sdvo_init], No SDVO device found on SDVOB > [ 3.478677] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 0 > [ 3.478681] [drm:intel_setup_outputs], probing HDMI on SDVOB > [ 3.479243] [drm:intel_dp_init_connector], Adding DP connector on port B > [ 3.479562] [drm:intel_dp_i2c_init], i2c_init DPDDC-B > [ 3.482038] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 3.482047] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 > [ 3.484406] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 3.484415] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 > [ 3.484681] [drm:intel_setup_outputs], probing SDVOC > [ 3.484689] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1 > [ 3.497606] [drm:intel_sdvo_read_byte], i2c transfer returned -6 > [ 3.497609] [drm:intel_sdvo_init], No SDVO device found on SDVOC > [ 3.497704] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 0 > [ 3.497708] [drm:intel_setup_outputs], probing HDMI on SDVOC > [ 3.498007] [drm:intel_dp_init_connector], Adding DP connector on port C > [ 3.498277] [drm:intel_dp_i2c_init], i2c_init DPDDC-C > [ 3.500635] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 3.500644] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 > [ 3.503002] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 3.503010] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 > [ 3.503227] [drm:intel_dp_init_connector], Adding DP connector on port D > [ 3.503480] [drm:intel_dp_i2c_init], i2c_init DPDDC-D > [ 3.505843] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 3.505852] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 > [ 3.508211] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 3.508219] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 > [ 3.508429] [drm:intel_tv_init], Integrated TV is not present. > [ 3.508437] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7ffff000] > [ 3.511157] [drm:init_status_page], render ring hws offset: 0x00001000 > [ 3.511160] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000 > [ 3.511165] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072 > [ 3.511275] [drm:init_status_page], bsd ring hws offset: 0x00024000 > [ 3.511277] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000 > [ 3.511282] [drm:i915_pages_create_for_stolen], offset=0x20000, size=131072 > [ 3.511365] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: disabled > [ 3.511377] [drm:intel_modeset_readout_hw_state], [CRTC:4] hw state readout: enabled > [ 3.511382] [drm:intel_modeset_readout_hw_state], [ENCODER:6:LVDS-6] hw state readout: enabled, pipe B > [ 3.511386] [drm:intel_modeset_readout_hw_state], [ENCODER:13:DAC-13] hw state readout: disabled, pipe A > [ 3.511389] [drm:intel_modeset_readout_hw_state], [ENCODER:14:TMDS-14] hw state readout: disabled, pipe A > [ 3.511392] [drm:intel_modeset_readout_hw_state], [ENCODER:18:TMDS-18] hw state readout: disabled, pipe A > [ 3.511395] [drm:intel_modeset_readout_hw_state], [ENCODER:20:TMDS-20] hw state readout: disabled, pipe A > [ 3.511398] [drm:intel_modeset_readout_hw_state], [ENCODER:22:TMDS-22] hw state readout: disabled, pipe A > [ 3.511402] [drm:intel_modeset_readout_hw_state], [ENCODER:24:TMDS-24] hw state readout: disabled, pipe A > [ 3.511405] [drm:intel_modeset_readout_hw_state], [CONNECTOR:5:LVDS-1] hw state readout: enabled > [ 3.511408] [drm:intel_modeset_readout_hw_state], [CONNECTOR:12:VGA-1] hw state readout: disabled > [ 3.511411] [drm:intel_modeset_readout_hw_state], [CONNECTOR:15:HDMI-A-1] hw state readout: disabled > [ 3.511414] [drm:intel_modeset_readout_hw_state], [CONNECTOR:19:DP-1] hw state readout: disabled > [ 3.511417] [drm:intel_modeset_readout_hw_state], [CONNECTOR:21:HDMI-A-2] hw state readout: disabled > [ 3.511420] [drm:intel_modeset_readout_hw_state], [CONNECTOR:23:DP-2] hw state readout: disabled > [ 3.511423] [drm:intel_modeset_readout_hw_state], [CONNECTOR:25:DP-3] hw state readout: disabled > [ 3.511428] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A > [ 3.511430] [drm:intel_dump_pipe_config], cpu_transcoder: A > [ 3.511432] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 > [ 3.511435] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 > [ 3.511438] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 > [ 3.511440] [drm:intel_dump_pipe_config], requested mode: > [ 3.511443] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 > [ 3.511445] [drm:intel_dump_pipe_config], adjusted mode: > [ 3.511448] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 > [ 3.511451] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 > [ 3.511453] [drm:intel_dump_pipe_config], port clock: 0 > [ 3.511455] [drm:intel_dump_pipe_config], pipe src size: 0x0 > [ 3.511457] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 > [ 3.511460] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled > [ 3.511462] [drm:intel_dump_pipe_config], ips: 0 > [ 3.511464] [drm:intel_dump_pipe_config], double wide: 0 > [ 3.511467] [drm:intel_dump_pipe_config], [CRTC:4][setup_hw_state] config for pipe B > [ 3.511469] [drm:intel_dump_pipe_config], cpu_transcoder: B > [ 3.511471] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 > [ 3.511474] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 > [ 3.511476] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 > [ 3.511478] [drm:intel_dump_pipe_config], requested mode: > [ 3.511482] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 800 0 0 0 600 0 0 0 0x0 0x0 > [ 3.511484] [drm:intel_dump_pipe_config], adjusted mode: > [ 3.511487] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa > [ 3.511490] [drm:intel_dump_crtc_timings], crtc timings: 73810 1440 1464 1480 1600 900 903 909 926, type: 0x0 flags: 0xa > [ 3.511492] [drm:intel_dump_pipe_config], port clock: 73810 > [ 3.511494] [drm:intel_dump_pipe_config], pipe src size: 800x600 > [ 3.511497] [drm:intel_dump_pipe_config], gmch pfit: control: 0xa0000000, ratios: 0x0aab08e4, lvds border: 0x00008000 > [ 3.511499] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled > [ 3.511501] [drm:intel_dump_pipe_config], ips: 0 > [ 3.511503] [drm:intel_dump_pipe_config], double wide: 0 > [ 3.511506] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1] > [ 3.511513] [drm:check_encoder_state], [ENCODER:6:LVDS-6] > [ 3.511516] [drm:check_encoder_state], [ENCODER:13:DAC-13] > [ 3.511519] [drm:check_encoder_state], [ENCODER:14:TMDS-14] > [ 3.511522] [drm:check_encoder_state], [ENCODER:18:TMDS-18] > [ 3.511524] [drm:check_encoder_state], [ENCODER:20:TMDS-20] > [ 3.511527] [drm:check_encoder_state], [ENCODER:22:TMDS-22] > [ 3.511530] [drm:check_encoder_state], [ENCODER:24:TMDS-24] > [ 3.511533] [drm:check_crtc_state], [CRTC:3] > [ 3.511536] [drm:check_crtc_state], [CRTC:4] > [ 3.511562] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] > [ 3.511565] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1] > [ 3.511578] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : > [ 3.511582] [drm:drm_mode_debug_printmodeline], Modeline 8:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa > [ 3.511584] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] > [ 3.511587] [drm:intel_crt_detect], [CONNECTOR:12:VGA-1] force=1 > [ 3.524126] [drm:intel_crt_detect], CRT not detected via hotplug > [ 3.528116] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) > [ 3.528121] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 3.528124] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 3.528127] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 3.528446] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 3.528448] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 3.528450] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] > [ 3.528453] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected > [ 3.528456] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] > [ 3.528458] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1] > [ 3.584116] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 > [ 3.596171] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb > [ 3.596175] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected > [ 3.596177] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] > [ 3.596180] [drm:intel_dp_detect], [CONNECTOR:19:DP-1] > [ 3.598609] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 3.606458] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 3.614533] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 3.620062] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected > [ 3.620066] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] > [ 3.620068] [drm:intel_hdmi_detect], [CONNECTOR:21:HDMI-A-2] > [ 3.628063] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) > [ 3.628067] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc > [ 3.628070] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected > [ 3.628073] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] > [ 3.628075] [drm:intel_dp_detect], [CONNECTOR:23:DP-2] > [ 3.630477] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 3.638457] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 3.646458] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 3.652061] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] disconnected > [ 3.652064] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] > [ 3.652066] [drm:intel_dp_detect], [CONNECTOR:25:DP-3] > [ 3.654467] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 3.662457] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 3.670546] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 3.676061] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] disconnected > [ 3.676064] [drm:drm_setup_crtcs], > [ 3.676068] [drm:drm_enable_connectors], connector 5 enabled? yes > [ 3.676070] [drm:drm_enable_connectors], connector 12 enabled? no > [ 3.676073] [drm:drm_enable_connectors], connector 15 enabled? no > [ 3.676075] [drm:drm_enable_connectors], connector 19 enabled? no > [ 3.676077] [drm:drm_enable_connectors], connector 21 enabled? no > [ 3.676079] [drm:drm_enable_connectors], connector 23 enabled? no > [ 3.676082] [drm:drm_enable_connectors], connector 25 enabled? no > [ 3.676085] [drm:drm_target_preferred], looking for cmdline mode on connector 5 > [ 3.676087] [drm:drm_target_preferred], looking for preferred mode on connector 5 > [ 3.676090] [drm:drm_target_preferred], found mode 1440x900 > [ 3.676092] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config > [ 3.676097] [drm:drm_setup_crtcs], desired mode 1440x900 set on crtc 3 > [ 3.676104] [drm:intelfb_create], no BIOS fb, allocating a new one > [ 3.676106] [drm:i915_gem_object_create_stolen], creating stolen object: size=4f2000 > [ 3.676113] [drm:i915_pages_create_for_stolen], offset=0x40000, size=5185536 > [ 3.678526] [drm:intelfb_create], allocated 1440x900 fb: 0x00046000, bo ffff8800377db740 > [ 3.679044] fbcon: inteldrmfb (fb0) is primary device > [ 3.679587] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) > [ 3.679592] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set > [ 3.679594] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set > [ 3.679597] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 > [ 3.679600] [drm:drm_mode_debug_printmodeline], Modeline 9:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa > [ 3.679602] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0 > [ 3.679604] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] > [ 3.679605] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch > [ 3.679609] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 2 > [ 3.679614] [drm:connected_sink_compute_bpp], [CONNECTOR:5:LVDS-1] checking for sink bpp constrains > [ 3.679636] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18) > [ 3.679638] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1 > [ 3.679640] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A > [ 3.679641] [drm:intel_dump_pipe_config], cpu_transcoder: A > [ 3.679642] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1 > [ 3.679644] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 > [ 3.679646] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 > [ 3.679647] [drm:intel_dump_pipe_config], requested mode: > [ 3.679651] [drm:drm_mode_debug_printmodeline], Modeline 0:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa > [ 3.679652] [drm:intel_dump_pipe_config], adjusted mode: > [ 3.679655] [drm:drm_mode_debug_printmodeline], Modeline 0:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa > [ 3.679657] [drm:intel_dump_crtc_timings], crtc timings: 74080 1440 1464 1480 1600 900 903 909 926, type: 0x48 flags: 0xa > [ 3.679659] [drm:intel_dump_pipe_config], port clock: 74080 > [ 3.679660] [drm:intel_dump_pipe_config], pipe src size: 1440x900 > [ 3.679662] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 > [ 3.679663] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled > [ 3.679665] [drm:intel_dump_pipe_config], ips: 0 > [ 3.679666] [drm:intel_dump_pipe_config], double wide: 0 > [ 3.679686] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 > [ 3.679829] [drm:asle_work], No request on ASLC interrupt 0x00000000 > [ 3.980146] [drm:i9xx_pfit_disable], disabling pfit, current: 0xa0000000 > [ 3.980156] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0 > [ 3.980161] [drm:intel_update_fbc], no output, disabling > [ 3.980173] [drm:i9xx_get_refclk], using SSC reference clock of 100000 kHz > [ 3.980218] [drm:i9xx_set_pipeconf], disabling CxSR downclocking > [ 3.980254] [drm:i9xx_update_plane], Writing base 00046000 00000000 0 0 5760 > [ 3.980268] [drm:intel_crtc_mode_set], [ENCODER:6:LVDS-6] set [MODE:0:1440x900] > [ 3.981006] [drm:g4x_check_srwm], SR watermark: display plane 58, cursor 6 > [ 3.981008] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=26, cursor=6, B: plane=2, cursor=2, SR: plane=58, cursor=6 > [ 4.044128] [drm:intel_update_fbc], disabled per chip default > [ 4.180151] [drm:intel_panel_enable_backlight], pipe A > [ 4.180155] [drm:intel_panel_actually_set_backlight], set backlight PWM = 3211215 > [ 4.180165] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1] > [ 4.180174] [drm:check_encoder_state], [ENCODER:6:LVDS-6] > [ 4.180177] [drm:check_encoder_state], [ENCODER:13:DAC-13] > [ 4.180180] [drm:check_encoder_state], [ENCODER:14:TMDS-14] > [ 4.180183] [drm:check_encoder_state], [ENCODER:18:TMDS-18] > [ 4.180186] [drm:check_encoder_state], [ENCODER:20:TMDS-20] > [ 4.180189] [drm:check_encoder_state], [ENCODER:22:TMDS-22] > [ 4.180192] [drm:check_encoder_state], [ENCODER:24:TMDS-24] > [ 4.180194] [drm:check_crtc_state], [CRTC:3] > [ 4.180209] [drm:asle_work], No request on ASLC interrupt 0x00000000 > [ 4.180213] [drm:check_crtc_state], [CRTC:4] > [ 4.180218] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] > [ 4.180223] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0 > [ 4.180226] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] > [ 4.180239] Console: switching to colour frame buffer device 180x56 > [ 4.180252] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) > [ 4.180263] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 > [ 4.180265] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] > [ 4.184146] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device > [ 4.184178] i915 0000:00:02.0: registered panic notifier > [ 4.185431] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) > [ 4.189353] [drm:asle_set_backlight], bclp = 0x80000007 > [ 4.189365] [drm:asle_set_backlight], updating opregion backlight 7/255 > [ 4.189384] [drm:intel_panel_actually_set_backlight], set backlight PWM = 88151 > [ 4.189416] [drm:asle_set_pwm_freq], PWM freq is not supported > [ 4.189420] [drm:asle_work], No request on ASLC interrupt 0x00010000 > [ 4.191738] [drm:asle_set_backlight], bclp = 0x800000ff > [ 4.191742] [drm:asle_set_backlight], updating opregion backlight 255/255 > [ 4.191745] [drm:intel_panel_actually_set_backlight], set backlight PWM = 3211215 > [ 4.191750] [drm:asle_set_pwm_freq], PWM freq is not supported > [ 4.193049] [drm:asle_work], No request on ASLC interrupt 0x00010000 > [ 4.193822] acpi device:02: registered as cooling_device2 > [ 4.194594] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6 > [ 4.195426] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 > [ 4.196154] uhci_hcd 0000:00:1a.0: UHCI Host Controller > [ 4.196382] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 > [ 4.196457] uhci_hcd 0000:00:1a.0: detected 2 ports > [ 4.196633] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 > [ 4.197318] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 > [ 4.197359] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 4.197402] usb usb1: Product: UHCI Host Controller > [ 4.197431] usb usb1: Manufacturer: Linux 3.14.0-rc4-00034-g6dba6ec uhci_hcd > [ 4.197472] usb usb1: SerialNumber: 0000:00:1a.0 > [ 4.199985] hub 1-0:1.0: USB hub found > [ 4.200275] hub 1-0:1.0: 2 ports detected > [ 4.202213] uhci_hcd 0000:00:1a.1: UHCI Host Controller > [ 4.202269] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 > [ 4.202332] uhci_hcd 0000:00:1a.1: detected 2 ports > [ 4.202457] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 > [ 4.202985] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 > [ 4.203027] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 4.203070] usb usb2: Product: UHCI Host Controller > [ 4.203101] usb usb2: Manufacturer: Linux 3.14.0-rc4-00034-g6dba6ec uhci_hcd > [ 4.203143] usb usb2: SerialNumber: 0000:00:1a.1 > [ 4.204551] hub 2-0:1.0: USB hub found > [ 4.204608] hub 2-0:1.0: 2 ports detected > [ 4.206787] uhci_hcd 0000:00:1a.2: UHCI Host Controller > [ 4.206834] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 > [ 4.208320] uhci_hcd 0000:00:1a.2: detected 2 ports > [ 4.209857] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0 > [ 4.211536] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 > [ 4.213057] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 4.214453] usb usb3: Product: UHCI Host Controller > [ 4.215839] usb usb3: Manufacturer: Linux 3.14.0-rc4-00034-g6dba6ec uhci_hcd > [ 4.217262] usb usb3: SerialNumber: 0000:00:1a.2 > [ 4.219796] hub 3-0:1.0: USB hub found > [ 4.221328] hub 3-0:1.0: 2 ports detected > [ 4.224174] uhci_hcd 0000:00:1d.0: UHCI Host Controller > [ 4.225577] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 > [ 4.226975] uhci_hcd 0000:00:1d.0: detected 2 ports > [ 4.228469] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0 > [ 4.230289] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > [ 4.231664] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 4.233047] usb usb4: Product: UHCI Host Controller > [ 4.234411] usb usb4: Manufacturer: Linux 3.14.0-rc4-00034-g6dba6ec uhci_hcd > [ 4.235770] usb usb4: SerialNumber: 0000:00:1d.0 > [ 4.238147] hub 4-0:1.0: USB hub found > [ 4.239557] hub 4-0:1.0: 2 ports detected > [ 4.242199] uhci_hcd 0000:00:1d.1: UHCI Host Controller > [ 4.243534] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 > [ 4.244900] uhci_hcd 0000:00:1d.1: detected 2 ports > [ 4.246281] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0 > [ 4.247992] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 > [ 4.249321] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 4.250616] usb usb5: Product: UHCI Host Controller > [ 4.251883] usb usb5: Manufacturer: Linux 3.14.0-rc4-00034-g6dba6ec uhci_hcd > [ 4.253181] usb usb5: SerialNumber: 0000:00:1d.1 > [ 4.255390] hub 5-0:1.0: USB hub found > [ 4.256726] hub 5-0:1.0: 2 ports detected > [ 4.259244] uhci_hcd 0000:00:1d.2: UHCI Host Controller > [ 4.260521] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 > [ 4.261789] uhci_hcd 0000:00:1d.2: detected 2 ports > [ 4.263034] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00 > [ 4.264723] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 > [ 4.266055] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 4.267385] usb usb6: Product: UHCI Host Controller > [ 4.268726] usb usb6: Manufacturer: Linux 3.14.0-rc4-00034-g6dba6ec uhci_hcd > [ 4.269974] usb usb6: SerialNumber: 0000:00:1d.2 > [ 4.272172] hub 6-0:1.0: USB hub found > [ 4.273469] hub 6-0:1.0: 2 ports detected > [ 4.405964] [drm:i915_gem_open], > [ 4.406129] [drm:intel_crtc_cursor_set], cursor off > [ 4.406139] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) > [ 4.406146] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 > [ 4.406149] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] > [ 4.406153] [drm:intel_crtc_cursor_set], cursor off > [ 4.406156] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] > [ 4.406160] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0 > [ 4.406163] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] > [ 4.406221] [drm:i915_gem_open], > [ 4.406244] [drm:intel_crtc_cursor_set], cursor off > [ 4.406248] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) > [ 4.406253] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 > [ 4.406255] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] > [ 4.406259] [drm:intel_crtc_cursor_set], cursor off > [ 4.406261] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] > [ 4.406265] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0 > [ 4.406268] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] > [ 4.406318] [drm:i915_gem_open], > [ 4.406472] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[7] ENCODERS[7] > [ 4.406491] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[7] ENCODERS[7] > [ 4.406509] [drm:drm_mode_getconnector], [CONNECTOR:5:?] > [ 4.406517] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] > [ 4.406520] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1] > [ 4.406539] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : > [ 4.406544] [drm:drm_mode_debug_printmodeline], Modeline 8:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa > [ 4.406548] [drm:drm_mode_getconnector], [CONNECTOR:5:?] > [ 4.411274] [drm:drm_mode_getconnector], [CONNECTOR:12:?] > [ 4.411282] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] > [ 4.411285] [drm:intel_crt_detect], [CONNECTOR:12:VGA-1] force=1 > [ 4.424150] [drm:intel_crt_detect], CRT not detected via hotplug > [ 4.428131] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) > [ 4.428136] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 4.428140] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 4.428143] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 4.428456] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 4.428458] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 4.428460] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] > [ 4.428464] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected > [ 4.428470] [drm:drm_mode_getconnector], [CONNECTOR:12:?] > [ 4.428474] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] > [ 4.428477] [drm:intel_crt_detect], [CONNECTOR:12:VGA-1] force=1 > [ 4.436128] [drm:intel_crt_detect], CRT not detected via hotplug > [ 4.440124] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) > [ 4.440129] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 4.440131] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 4.440134] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 4.440446] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 4.440448] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 4.440450] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] > [ 4.440453] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected > [ 4.440462] [drm:drm_mode_getconnector], [CONNECTOR:15:?] > [ 4.440466] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] > [ 4.440469] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1] > [ 4.452707] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb > [ 4.452711] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected > [ 4.452715] [drm:drm_mode_getconnector], [CONNECTOR:15:?] > [ 4.452718] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] > [ 4.452720] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1] > [ 4.464978] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb > [ 4.464981] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected > [ 4.464989] [drm:drm_mode_getconnector], [CONNECTOR:19:?] > [ 4.464992] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] > [ 4.464995] [drm:intel_dp_detect], [CONNECTOR:19:DP-1] > [ 4.467460] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 4.474459] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 4.482544] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 4.488061] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected > [ 4.488067] [drm:drm_mode_getconnector], [CONNECTOR:19:?] > [ 4.488071] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] > [ 4.488073] [drm:intel_dp_detect], [CONNECTOR:19:DP-1] > [ 4.490474] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 4.498458] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 4.506457] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 4.512061] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected > [ 4.512070] [drm:drm_mode_getconnector], [CONNECTOR:21:?] > [ 4.512074] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] > [ 4.512077] [drm:intel_hdmi_detect], [CONNECTOR:21:HDMI-A-2] > [ 4.516059] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) > [ 4.516063] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc > [ 4.516066] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected > [ 4.516071] [drm:drm_mode_getconnector], [CONNECTOR:21:?] > [ 4.516075] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] > [ 4.516077] [drm:intel_hdmi_detect], [CONNECTOR:21:HDMI-A-2] > [ 4.520058] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) > [ 4.520062] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc > [ 4.520065] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected > [ 4.520075] usb 2-1: new full-speed USB device number 2 using uhci_hcd > [ 4.520076] [drm:drm_mode_getconnector], [CONNECTOR:23:?] > [ 4.520079] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] > [ 4.520081] [drm:intel_dp_detect], [CONNECTOR:23:DP-2] > [ 4.523817] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 4.530539] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 4.538458] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 4.544061] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] disconnected > [ 4.544067] [drm:drm_mode_getconnector], [CONNECTOR:23:?] > [ 4.544071] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] > [ 4.544074] [drm:intel_dp_detect], [CONNECTOR:23:DP-2] > [ 4.546475] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 4.554458] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 4.562457] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 4.568060] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] disconnected > [ 4.568070] [drm:drm_mode_getconnector], [CONNECTOR:25:?] > [ 4.568074] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] > [ 4.568076] [drm:intel_dp_detect], [CONNECTOR:25:DP-3] > [ 4.570476] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 4.578458] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 4.586541] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 4.592062] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] disconnected > [ 4.592067] [drm:drm_mode_getconnector], [CONNECTOR:25:?] > [ 4.592071] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] > [ 4.592074] [drm:intel_dp_detect], [CONNECTOR:25:DP-3] > [ 4.594475] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 4.602458] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 4.610457] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 4.616061] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] disconnected > [ 4.616269] [drm:drm_mode_addfb], [FB:27] > [ 4.670528] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff] > [ 4.670535] PM: Marking nosave pages: [mem 0x7c4a1000-0x7c4a6fff] > [ 4.670538] PM: Marking nosave pages: [mem 0x7c5b7000-0x7c60efff] > [ 4.670542] PM: Marking nosave pages: [mem 0x7c6c6000-0x7c9fefff] > [ 4.670563] PM: Basic memory bitmaps created > [ 4.680981] PM: Basic memory bitmaps freed > [ 4.681036] video LNXVIDEO:00: Restoring backlight state > [ 4.684265] [drm:asle_set_backlight], bclp = 0x800000ff > [ 4.684270] [drm:asle_set_backlight], updating opregion backlight 255/255 > [ 4.684275] [drm:intel_panel_actually_set_backlight], set backlight PWM = 3211215 > [ 4.684313] [drm:asle_set_pwm_freq], PWM freq is not supported > [ 4.684332] [drm:asle_work], No request on ASLC interrupt 0x00010000 > [ 4.687592] usb 2-1: New USB device found, idVendor=08ff, idProduct=2810 > [ 4.687637] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 > [ 4.687678] usb 2-1: Product: Fingerprint Sensor > [ 4.705743] PM: Starting manual resume from disk > [ 4.705800] PM: Hibernation image partition 8:1 present > [ 4.705803] PM: Looking for hibernation image. > [ 4.706313] PM: Image not found (code -22) > [ 4.706318] PM: Hibernation image not present or could not be loaded. > [ 4.765812] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: acl,user_xattr > [ 4.801952] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr > [ 4.808066] usb 2-2: new full-speed USB device number 3 using uhci_hcd > [ 4.968632] usb 2-2: New USB device found, idVendor=0a5c, idProduct=2145 > [ 4.968682] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > [ 4.968724] usb 2-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II > [ 4.968764] usb 2-2: Manufacturer: Lenovo Computer Corp > [ 5.171050] random: systemd urandom read with 93 bits of entropy available > [ 5.333994] systemd-readahead[260]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day. > [ 5.422707] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr > [ 5.483891] systemd-udevd[291]: starting version 195 > [ 5.639947] random: nonblocking pool is initialized > [ 5.819921] systemd-journald[265]: Received SIGUSR1 > [ 6.199644] [drm:intel_crtc_cursor_set], cursor off > [ 6.199653] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) > [ 6.199661] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 > [ 6.199665] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] > [ 6.199671] [drm:intel_crtc_cursor_set], cursor off > [ 6.199674] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] > [ 6.199678] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0 > [ 6.199682] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] > [ 6.248230] tpm_tis 00:09: 1.2 TPM (device-id 0x1020, rev-id 6) > [ 6.248232] tpm_tis 00:09: Intel iTPM workaround enabled > [ 6.269758] ACPI: Battery Slot [BAT0] (battery present) > [ 6.272422] ACPI: AC Adapter [AC] (on-line) > [ 6.316422] wmi: Mapper loaded > [ 6.361415] pps_core: LinuxPPS API ver. 1 registered > [ 6.362681] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx> > [ 6.376757] PTP clock support registered > [ 6.400215] ehci-pci: EHCI PCI platform driver > [ 6.427404] WARNING! power/level is deprecated; use power/control instead > [ 6.429470] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k > [ 6.430830] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. > [ 6.432103] usb 2-1: USB disconnect, device number 2 > [ 6.436566] usb 2-2: USB disconnect, device number 3 > [ 6.467117] ehci-pci 0000:00:1a.7: EHCI Host Controller > [ 6.468633] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 7 > [ 6.470006] ehci-pci 0000:00:1a.7: debug port 1 > [ 6.475410] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported > [ 6.475505] ehci-pci 0000:00:1a.7: irq 23, io mem 0xf2826c00 > [ 6.488075] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 > [ 6.490519] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 > [ 6.491931] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 6.493362] usb usb7: Product: EHCI Host Controller > [ 6.494760] usb usb7: Manufacturer: Linux 3.14.0-rc4-00034-g6dba6ec ehci_hcd > [ 6.496232] usb usb7: SerialNumber: 0000:00:1a.7 > [ 6.514396] hub 7-0:1.0: USB hub found > [ 6.516194] hub 7-0:1.0: 6 ports detected > [ 6.557523] hub 1-0:1.0: USB hub found > [ 6.560824] hub 1-0:1.0: 2 ports detected > [ 6.562667] input: PC Speaker as /devices/platform/pcspkr/input/input7 > [ 6.585670] Bluetooth: Core ver 2.18 > [ 6.587094] NET: Registered protocol family 31 > [ 6.588563] Bluetooth: HCI device and connection manager initialized > [ 6.590056] Bluetooth: HCI socket layer initialized > [ 6.591457] Bluetooth: L2CAP socket layer initialized > [ 6.592914] Bluetooth: SCO socket layer initialized > [ 6.601126] usbcore: registered new interface driver btusb > [ 6.608530] hub 2-0:1.0: USB hub found > [ 6.623305] hub 2-0:1.0: 2 ports detected > [ 6.648172] cfg80211: Calling CRDA to update world regulatory domain > [ 6.652627] hub 3-0:1.0: USB hub found > [ 6.654689] hub 3-0:1.0: 2 ports detected > [ 6.699274] Intel(R) Wireless WiFi driver for Linux, in-tree:d > [ 6.700712] Copyright(c) 2003- 2014 Intel Corporation > [ 6.702602] iwlwifi 0000:03:00.0: irq 45 for MSI/MSI-X > [ 6.718505] iwlwifi 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm > [ 6.729554] ehci-pci 0000:00:1d.7: EHCI Host Controller > [ 6.731033] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8 > [ 6.732582] ehci-pci 0000:00:1d.7: debug port 1 > [ 6.737946] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported > [ 6.738166] ehci-pci 0000:00:1d.7: irq 19, io mem 0xf2827000 > [ 6.786608] sd 0:0:0:0: Attached scsi generic sg0 type 0 > [ 6.882230] thinkpad_acpi: ThinkPad ACPI Extras v0.25 > [ 6.883665] thinkpad_acpi: http://ibm-acpi.sf.net/ > [ 6.885135] thinkpad_acpi: ThinkPad BIOS 6DET38WW (2.02 ), EC 7XHT21WW-1.03 > [ 6.886547] thinkpad_acpi: Lenovo ThinkPad X200s, model 7470BN2 > [ 6.914655] thinkpad_acpi: detected a 16-level brightness capable ThinkPad > [ 6.916395] thinkpad_acpi: radio switch found; radios are enabled > [ 6.917920] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver > [ 6.919414] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... > [ 6.925233] thinkpad_acpi: setting the hotkey mask to 0x00ffffff is likely not the best way to go about it > [ 6.926795] thinkpad_acpi: please consider using the driver defaults, and refer to up-to-date thinkpad-acpi documentation > [ 6.959698] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked > [ 6.961569] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG enabled > [ 6.963153] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled > [ 6.964659] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled > [ 6.966167] iwlwifi 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54 > [ 6.967993] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S > [ 6.994052] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' > [ 6.998828] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one > [ 7.001509] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > [ 7.003340] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 > [ 7.004856] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 7.006347] usb usb8: Product: EHCI Host Controller > [ 7.007828] usb usb8: Manufacturer: Linux 3.14.0-rc4-00034-g6dba6ec ehci_hcd > [ 7.009418] usb usb8: SerialNumber: 0000:00:1d.7 > [ 7.014441] hub 8-0:1.0: USB hub found > [ 7.017144] hub 8-0:1.0: 6 ports detected > [ 7.022604] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) > [ 7.038011] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8 > [ 7.044481] hub 4-0:1.0: USB hub found > [ 7.046753] hub 4-0:1.0: 2 ports detected > [ 7.093019] hub 5-0:1.0: USB hub found > [ 7.095245] hub 5-0:1.0: 2 ports detected > [ 7.120780] hub 6-0:1.0: USB hub found > [ 7.129446] hub 6-0:1.0: 2 ports detected > [ 7.144463] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode > [ 7.146137] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X > [ 7.215551] cfg80211: World regulatory domain updated: > [ 7.217168] cfg80211: DFS Master region: unset > [ 7.217196] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) > [ 7.220371] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > [ 7.221927] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) > [ 7.223587] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) > [ 7.225175] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > [ 7.226714] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > [ 7.359711] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:16:15:7a:65 > [ 7.361349] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection > [ 7.362952] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF > [ 7.365144] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt > [ 7.367369] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102f conflicts with OpRegion 0x0000000000001000-0x000000000000107f (\_SB_.PCI0.LPC_.PMIO) (20131218/utaddress-258) > [ 7.370745] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver > [ 7.372502] ACPI Warning: SystemIO range 0x00000000000011b0-0x00000000000011bf conflicts with OpRegion 0x0000000000001180-0x00000000000011ff (\_SB_.PCI0.LPC_.LPIO) (20131218/utaddress-258) > [ 7.376091] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver > [ 7.377956] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011af conflicts with OpRegion 0x0000000000001180-0x00000000000011ff (\_SB_.PCI0.LPC_.LPIO) (20131218/utaddress-258) > [ 7.381810] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver > [ 7.383741] lpc_ich: Resource conflict(s) found affecting gpio_ich > [ 7.386865] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X > [ 7.405724] iTCO_vendor_support: vendor-support=0 > [ 7.414664] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 > [ 7.416778] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060) > [ 7.422078] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > [ 7.424368] hda_codec: CX20561 (Hermosa): BIOS auto-probing. > [ 7.427045] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker > [ 7.427050] ALSA sound/pci/hda/hda_auto_parser.c:397 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) > [ 7.427053] ALSA sound/pci/hda/hda_auto_parser.c:401 hp_outs=2 (0x19/0x16/0x0/0x0/0x0) > [ 7.427055] ALSA sound/pci/hda/hda_auto_parser.c:402 mono: mono_out=0x0 > [ 7.427058] ALSA sound/pci/hda/hda_auto_parser.c:405 dig-out=0x1c/0x0 > [ 7.427060] ALSA sound/pci/hda/hda_auto_parser.c:406 inputs: > [ 7.427064] ALSA sound/pci/hda/hda_auto_parser.c:410 Mic=0x18 > [ 7.427068] ALSA sound/pci/hda/hda_auto_parser.c:410 Internal Mic=0x1d > [ 7.427072] ALSA sound/pci/hda/hda_auto_parser.c:410 Dock Mic=0x17 > [ 7.428885] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9 > [ 7.431459] ALSA sound/pci/hda/patch_conexant.c:3517 hda_codec: Enable sync_write for stable communication > [ 7.438609] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 > [ 7.443221] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 > [ 7.447215] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 > [ 7.449807] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 > [ 7.509056] Adding 2104476k swap on /dev/sda1. Priority:-1 extents:1 across:2104476k SS > [ 7.756120] usb 2-1: new full-speed USB device number 4 using uhci_hcd > [ 7.928170] usb 2-1: New USB device found, idVendor=08ff, idProduct=2810 > [ 7.928176] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 > [ 7.928179] usb 2-1: Product: Fingerprint Sensor > [ 8.172104] usb 2-2: new full-speed USB device number 5 using uhci_hcd > [ 8.342173] usb 2-2: New USB device found, idVendor=0a5c, idProduct=2145 > [ 8.342179] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > [ 8.342183] usb 2-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II > [ 8.342186] usb 2-2: Manufacturer: Lenovo Computer Corp > [ 8.439036] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > [ 8.439042] Bluetooth: BNEP filters: protocol multicast > [ 8.439063] Bluetooth: BNEP socket layer initialized > [ 8.441923] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S > [ 8.442325] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 > [ 8.487517] Bluetooth: RFCOMM TTY layer initialized > [ 8.487541] Bluetooth: RFCOMM socket layer initialized > [ 8.487560] Bluetooth: RFCOMM ver 1.11 > [ 8.552245] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S > [ 8.552641] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 > [ 8.584478] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 9.701221] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 9.761600] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > [ 9.828618] ip6_tables: (C) 2000-2006 Netfilter Core Team > [ 9.941027] tun: Universal TUN/TAP device driver, 1.6 > [ 9.941032] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> > [ 10.198811] [drm:i915_gem_open], > [ 10.198875] [drm:intel_crtc_cursor_set], cursor off > [ 10.198882] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) > [ 10.198889] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 > [ 10.198893] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] > [ 10.198898] [drm:intel_crtc_cursor_set], cursor off > [ 10.198902] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] > [ 10.198906] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0 > [ 10.198909] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] > [ 10.221815] [drm:i915_gem_open], > [ 10.221853] [drm:intel_crtc_cursor_set], cursor off > [ 10.221858] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) > [ 10.221864] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 > [ 10.221868] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] > [ 10.221872] [drm:intel_crtc_cursor_set], cursor off > [ 10.221875] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] > [ 10.221878] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0 > [ 10.221881] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] > [ 10.221936] [drm:i915_gem_open], > [ 10.221981] [drm:intel_crtc_cursor_set], cursor off > [ 10.221985] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) > [ 10.221989] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 > [ 10.221992] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] > [ 10.221996] [drm:intel_crtc_cursor_set], cursor off > [ 10.221999] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] > [ 10.222002] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0 > [ 10.222005] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] > [ 10.222220] [drm:i915_gem_open], > [ 10.222248] [drm:intel_crtc_cursor_set], cursor off > [ 10.222252] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) > [ 10.222257] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 > [ 10.222260] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] > [ 10.222263] [drm:intel_crtc_cursor_set], cursor off > [ 10.222266] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] > [ 10.222269] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0 > [ 10.222272] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] > [ 10.222326] [drm:i915_gem_open], > [ 10.222785] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[7] ENCODERS[7] > [ 10.222796] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[7] ENCODERS[7] > [ 10.222883] [drm:drm_mode_getconnector], [CONNECTOR:5:?] > [ 10.222887] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] > [ 10.222890] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1] > [ 10.222906] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : > [ 10.222910] [drm:drm_mode_debug_printmodeline], Modeline 8:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa > [ 10.222914] [drm:drm_mode_getconnector], [CONNECTOR:5:?] > [ 10.224499] [drm:drm_mode_getconnector], [CONNECTOR:12:?] > [ 10.224504] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] > [ 10.224508] [drm:intel_crt_detect], [CONNECTOR:12:VGA-1] force=1 > [ 10.232155] [drm:intel_crt_detect], CRT not detected via hotplug > [ 10.236353] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) > [ 10.236365] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 10.236372] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 10.236379] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 10.236790] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 10.236797] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 10.236803] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] > [ 10.236811] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected > [ 10.236825] [drm:drm_mode_getconnector], [CONNECTOR:12:?] > [ 10.236835] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] > [ 10.236842] [drm:intel_crt_detect], [CONNECTOR:12:VGA-1] force=1 > [ 10.244216] [drm:intel_crt_detect], CRT not detected via hotplug > [ 10.248281] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) > [ 10.248291] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 10.248297] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 10.248304] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 10.248715] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 10.248722] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 10.248728] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] > [ 10.248735] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected > [ 10.248872] [drm:drm_mode_getconnector], [CONNECTOR:15:?] > [ 10.248884] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] > [ 10.248891] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1] > [ 10.260888] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb > [ 10.260897] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected > [ 10.260942] [drm:drm_mode_getconnector], [CONNECTOR:15:?] > [ 10.260953] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] > [ 10.260959] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1] > [ 10.272941] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb > [ 10.272945] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected > [ 10.273010] [drm:drm_mode_getconnector], [CONNECTOR:19:?] > [ 10.273014] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] > [ 10.273017] [drm:intel_dp_detect], [CONNECTOR:19:DP-1] > [ 10.275451] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.282579] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.290611] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.296163] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected > [ 10.296179] [drm:drm_mode_getconnector], [CONNECTOR:19:?] > [ 10.296189] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] > [ 10.296196] [drm:intel_dp_detect], [CONNECTOR:19:DP-1] > [ 10.298652] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.306648] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.314602] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.320863] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected > [ 10.321006] [drm:drm_mode_getconnector], [CONNECTOR:21:?] > [ 10.321017] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] > [ 10.321024] [drm:intel_hdmi_detect], [CONNECTOR:21:HDMI-A-2] > [ 10.324267] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) > [ 10.324276] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc > [ 10.324284] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected > [ 10.324297] [drm:drm_mode_getconnector], [CONNECTOR:21:?] > [ 10.324307] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] > [ 10.324313] [drm:intel_hdmi_detect], [CONNECTOR:21:HDMI-A-2] > [ 10.328240] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) > [ 10.328251] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc > [ 10.328260] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected > [ 10.328404] [drm:drm_mode_getconnector], [CONNECTOR:23:?] > [ 10.328416] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] > [ 10.328422] [drm:intel_dp_detect], [CONNECTOR:23:DP-2] > [ 10.330843] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.338620] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.346598] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.352214] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] disconnected > [ 10.352231] [drm:drm_mode_getconnector], [CONNECTOR:23:?] > [ 10.352241] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] > [ 10.352248] [drm:intel_dp_detect], [CONNECTOR:23:DP-2] > [ 10.354706] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.362603] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.370609] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.376206] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] disconnected > [ 10.376365] [drm:drm_mode_getconnector], [CONNECTOR:25:?] > [ 10.376377] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] > [ 10.376384] [drm:intel_dp_detect], [CONNECTOR:25:DP-3] > [ 10.378840] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.386616] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.394605] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.400209] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] disconnected > [ 10.400226] [drm:drm_mode_getconnector], [CONNECTOR:25:?] > [ 10.400236] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] > [ 10.400243] [drm:intel_dp_detect], [CONNECTOR:25:DP-3] > [ 10.402698] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.410614] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.419318] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.424279] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] disconnected > [ 10.424459] [drm:drm_mode_getconnector], [CONNECTOR:5:?] > [ 10.424471] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] > [ 10.424479] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1] > [ 10.424512] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : > [ 10.424523] [drm:drm_mode_debug_printmodeline], Modeline 8:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa > [ 10.424535] [drm:drm_mode_getconnector], [CONNECTOR:5:?] > [ 10.428495] [drm:drm_mode_getconnector], [CONNECTOR:12:?] > [ 10.428503] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] > [ 10.428507] [drm:intel_crt_detect], [CONNECTOR:12:VGA-1] force=1 > [ 10.436152] [drm:intel_crt_detect], CRT not detected via hotplug > [ 10.440221] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) > [ 10.440226] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 10.440229] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 10.440233] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 10.440555] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 10.440559] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 10.440562] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] > [ 10.440565] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected > [ 10.440572] [drm:drm_mode_getconnector], [CONNECTOR:12:?] > [ 10.440577] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] > [ 10.440580] [drm:intel_crt_detect], [CONNECTOR:12:VGA-1] force=1 > [ 10.448145] [drm:intel_crt_detect], CRT not detected via hotplug > [ 10.452201] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) > [ 10.452207] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 10.452210] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 10.452213] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 10.452536] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 10.452540] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 10.452543] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] > [ 10.452546] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected > [ 10.452623] [drm:drm_mode_getconnector], [CONNECTOR:15:?] > [ 10.452629] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] > [ 10.452633] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1] > [ 10.464593] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb > [ 10.464597] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected > [ 10.464625] [drm:drm_mode_getconnector], [CONNECTOR:15:?] > [ 10.464630] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] > [ 10.464633] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1] > [ 10.476630] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb > [ 10.476634] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected > [ 10.476713] [drm:drm_mode_getconnector], [CONNECTOR:19:?] > [ 10.476718] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] > [ 10.476722] [drm:intel_dp_detect], [CONNECTOR:19:DP-1] > [ 10.479151] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.486580] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.494608] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.500159] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected > [ 10.500176] [drm:drm_mode_getconnector], [CONNECTOR:19:?] > [ 10.500186] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] > [ 10.500192] [drm:intel_dp_detect], [CONNECTOR:19:DP-1] > [ 10.502649] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.510652] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.518605] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.524161] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected > [ 10.524292] [drm:drm_mode_getconnector], [CONNECTOR:21:?] > [ 10.524303] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] > [ 10.524310] [drm:intel_hdmi_detect], [CONNECTOR:21:HDMI-A-2] > [ 10.528491] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) > [ 10.528502] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc > [ 10.528510] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected > [ 10.528524] [drm:drm_mode_getconnector], [CONNECTOR:21:?] > [ 10.528533] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] > [ 10.528540] [drm:intel_hdmi_detect], [CONNECTOR:21:HDMI-A-2] > [ 10.532239] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) > [ 10.532251] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc > [ 10.532259] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected > [ 10.532391] [drm:drm_mode_getconnector], [CONNECTOR:23:?] > [ 10.532403] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] > [ 10.532409] [drm:intel_dp_detect], [CONNECTOR:23:DP-2] > [ 10.534829] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.542609] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.550605] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.556124] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] disconnected > [ 10.556141] [drm:drm_mode_getconnector], [CONNECTOR:23:?] > [ 10.556151] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] > [ 10.556158] [drm:intel_dp_detect], [CONNECTOR:23:DP-2] > [ 10.558607] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.566602] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.574577] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.580210] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] disconnected > [ 10.580343] [drm:drm_mode_getconnector], [CONNECTOR:25:?] > [ 10.580354] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] > [ 10.580361] [drm:intel_dp_detect], [CONNECTOR:25:DP-3] > [ 10.582818] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.590601] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.598607] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.604207] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] disconnected > [ 10.604223] [drm:drm_mode_getconnector], [CONNECTOR:25:?] > [ 10.604233] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] > [ 10.604239] [drm:intel_dp_detect], [CONNECTOR:25:DP-3] > [ 10.606696] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.614612] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.622530] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 10.628141] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] disconnected > [ 10.713095] [drm:asle_set_backlight], bclp = 0x800000ff > [ 10.713103] [drm:asle_set_backlight], updating opregion backlight 255/255 > [ 10.713110] [drm:intel_panel_actually_set_backlight], set backlight PWM = 3211215 > [ 10.713119] [drm:asle_set_pwm_freq], PWM freq is not supported > [ 10.713124] [drm:asle_work], No request on ASLC interrupt 0x00010000 > [ 10.715211] [drm:asle_set_backlight], bclp = 0x800000ff > [ 10.715216] [drm:asle_set_backlight], updating opregion backlight 255/255 > [ 10.715220] [drm:intel_panel_actually_set_backlight], set backlight PWM = 3211215 > [ 10.715225] [drm:asle_set_pwm_freq], PWM freq is not supported > [ 10.715904] [drm:asle_work], No request on ASLC interrupt 0x00010000 > [ 10.717049] [drm:drm_mode_addfb], [FB:27] > [ 10.717218] [drm:drm_mode_setcrtc], [CRTC:3] > [ 10.717254] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1] > [ 10.717258] [drm:intel_crtc_set_config], [CRTC:3] [FB:27] #connectors=1 (x y) (0 0) > [ 10.717264] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=1 > [ 10.717268] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] > [ 10.759214] [drm:i9xx_update_plane], Writing base 00538000 00000000 0 0 15360 > [ 10.764633] [drm:drm_mode_setcrtc], [CRTC:4] > [ 10.764643] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] > [ 10.764656] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0 > [ 10.764664] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] > [ 10.778383] [drm:drm_mode_addfb], [FB:28] > [ 10.778523] [drm:drm_mode_setcrtc], [CRTC:3] > [ 10.778534] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1] > [ 10.778538] [drm:intel_crtc_set_config], [CRTC:3] [FB:28] #connectors=1 (x y) (0 0) > [ 10.778555] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=1 > [ 10.778560] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] > [ 10.790282] [drm:i9xx_update_plane], Writing base 01938000 00000000 0 0 6144 > [ 11.057334] [drm:drm_mode_getconnector], [CONNECTOR:5:?] > [ 11.057342] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] > [ 11.057346] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1] > [ 11.057364] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : > [ 11.057369] [drm:drm_mode_debug_printmodeline], Modeline 8:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa > [ 11.057375] [drm:drm_mode_getconnector], [CONNECTOR:5:?] > [ 11.057688] [drm:drm_mode_getconnector], [CONNECTOR:12:?] > [ 11.057694] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] > [ 11.057697] [drm:intel_crt_detect], [CONNECTOR:12:VGA-1] force=1 > [ 11.072181] [drm:intel_crt_detect], CRT not detected via hotplug > [ 11.076273] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) > [ 11.076283] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 11.076290] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 11.076297] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 11.076711] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 11.076718] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 11.076723] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] > [ 11.076731] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected > [ 11.076745] [drm:drm_mode_getconnector], [CONNECTOR:12:?] > [ 11.076754] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] > [ 11.076761] [drm:intel_crt_detect], [CONNECTOR:12:VGA-1] force=1 > [ 11.084204] [drm:intel_crt_detect], CRT not detected via hotplug > [ 11.088279] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) > [ 11.088291] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 11.088298] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 11.088304] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 11.088717] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 11.088724] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 11.088730] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] > [ 11.088738] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected > [ 11.088784] [drm:drm_mode_getconnector], [CONNECTOR:15:?] > [ 11.088796] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] > [ 11.088803] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1] > [ 11.100796] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb > [ 11.100806] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected > [ 11.100868] [drm:drm_mode_getconnector], [CONNECTOR:15:?] > [ 11.100879] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] > [ 11.100885] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1] > [ 11.112834] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb > [ 11.112838] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected > [ 11.112860] [drm:drm_mode_getconnector], [CONNECTOR:19:?] > [ 11.112864] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] > [ 11.112867] [drm:intel_dp_detect], [CONNECTOR:19:DP-1] > [ 11.115301] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 11.122579] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 11.130608] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 11.136152] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected > [ 11.136190] [drm:drm_mode_getconnector], [CONNECTOR:19:?] > [ 11.136200] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] > [ 11.136207] [drm:intel_dp_detect], [CONNECTOR:19:DP-1] > [ 11.138664] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 11.146649] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 11.154611] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 11.160155] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected > [ 11.160204] [drm:drm_mode_getconnector], [CONNECTOR:21:?] > [ 11.160215] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] > [ 11.160222] [drm:intel_hdmi_detect], [CONNECTOR:21:HDMI-A-2] > [ 11.164500] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) > [ 11.164511] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc > [ 11.164518] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected > [ 11.164532] [drm:drm_mode_getconnector], [CONNECTOR:21:?] > [ 11.164542] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] > [ 11.164548] [drm:intel_hdmi_detect], [CONNECTOR:21:HDMI-A-2] > [ 11.168232] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) > [ 11.168246] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc > [ 11.168255] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected > [ 11.168284] [drm:drm_mode_getconnector], [CONNECTOR:23:?] > [ 11.168295] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] > [ 11.168301] [drm:intel_dp_detect], [CONNECTOR:23:DP-2] > [ 11.170725] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 11.178610] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 11.186607] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 11.192200] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] disconnected > [ 11.192236] [drm:drm_mode_getconnector], [CONNECTOR:23:?] > [ 11.192247] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] > [ 11.192254] [drm:intel_dp_detect], [CONNECTOR:23:DP-2] > [ 11.194711] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 11.202610] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 11.210601] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 11.216205] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] disconnected > [ 11.216256] [drm:drm_mode_getconnector], [CONNECTOR:25:?] > [ 11.216267] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] > [ 11.216274] [drm:intel_dp_detect], [CONNECTOR:25:DP-3] > [ 11.218732] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 11.226605] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 11.234599] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 11.240202] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] disconnected > [ 11.240238] [drm:drm_mode_getconnector], [CONNECTOR:25:?] > [ 11.240249] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] > [ 11.240256] [drm:intel_dp_detect], [CONNECTOR:25:DP-3] > [ 11.242712] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 11.250612] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 11.258580] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 11.264213] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] disconnected > [ 12.099257] [drm:intel_dp_detect], [CONNECTOR:19:DP-1] > [ 12.101689] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 12.110466] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 12.118465] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 12.124177] [drm:intel_dp_detect], [CONNECTOR:23:DP-2] > [ 12.126577] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 12.134469] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 12.142469] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 12.148191] [drm:intel_dp_detect], [CONNECTOR:25:DP-3] > [ 12.150591] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 12.158484] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 12.166449] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 12.172169] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1] > [ 12.184187] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb > [ 12.184515] [drm:intel_hdmi_detect], [CONNECTOR:21:HDMI-A-2] > [ 12.188251] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) > [ 12.188256] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc > [ 12.188373] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1] > [ 12.188482] [drm:intel_crt_detect], [CONNECTOR:12:VGA-1] force=1 > [ 12.196072] [drm:intel_crt_detect], CRT not detected via hotplug > [ 12.200198] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) > [ 12.200203] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 12.200206] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 12.200210] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 12.200533] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 12.200537] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 12.200539] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] > [ 12.288331] [drm:drm_mode_getconnector], [CONNECTOR:5:?] > [ 12.288341] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] > [ 12.288345] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1] > [ 12.288363] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : > [ 12.288368] [drm:drm_mode_debug_printmodeline], Modeline 8:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa > [ 12.288374] [drm:drm_mode_getconnector], [CONNECTOR:5:?] > [ 12.288705] [drm:drm_mode_getconnector], [CONNECTOR:12:?] > [ 12.288711] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] > [ 12.288715] [drm:intel_crt_detect], [CONNECTOR:12:VGA-1] force=1 > [ 12.296093] [drm:intel_crt_detect], CRT not detected via hotplug > [ 12.300187] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) > [ 12.300193] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 12.300196] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 12.300199] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 12.300510] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 12.300513] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 12.300516] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] > [ 12.300519] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected > [ 12.300527] [drm:drm_mode_getconnector], [CONNECTOR:12:?] > [ 12.300531] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] > [ 12.300534] [drm:intel_crt_detect], [CONNECTOR:12:VGA-1] force=1 > [ 12.308058] [drm:intel_crt_detect], CRT not detected via hotplug > [ 12.312192] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) > [ 12.312197] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 12.312200] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 12.312203] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 12.312514] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 12.312517] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 12.312519] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] > [ 12.312523] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected > [ 12.312550] [drm:drm_mode_getconnector], [CONNECTOR:15:?] > [ 12.312555] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] > [ 12.312558] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1] > [ 12.324461] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb > [ 12.324466] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected > [ 12.325360] [drm:drm_mode_getconnector], [CONNECTOR:15:?] > [ 12.325366] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] > [ 12.325369] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1] > [ 12.337276] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb > [ 12.337280] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected > [ 12.337668] [drm:drm_mode_getconnector], [CONNECTOR:19:?] > [ 12.337674] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] > [ 12.337678] [drm:intel_dp_detect], [CONNECTOR:19:DP-1] > [ 12.340081] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 12.350433] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 12.358480] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 12.364065] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected > [ 12.364084] [drm:drm_mode_getconnector], [CONNECTOR:19:?] > [ 12.364089] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] > [ 12.364092] [drm:intel_dp_detect], [CONNECTOR:19:DP-1] > [ 12.366489] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 12.374445] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 12.382447] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 12.388048] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected > [ 12.388079] [drm:drm_mode_getconnector], [CONNECTOR:21:?] > [ 12.388084] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] > [ 12.388087] [drm:intel_hdmi_detect], [CONNECTOR:21:HDMI-A-2] > [ 12.392482] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) > [ 12.392487] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc > [ 12.392491] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected > [ 12.392538] [drm:drm_mode_getconnector], [CONNECTOR:21:?] > [ 12.392543] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] > [ 12.392546] [drm:intel_hdmi_detect], [CONNECTOR:21:HDMI-A-2] > [ 12.396575] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) > [ 12.396580] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc > [ 12.396584] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected > [ 12.396598] [drm:drm_mode_getconnector], [CONNECTOR:23:?] > [ 12.396602] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] > [ 12.396606] [drm:intel_dp_detect], [CONNECTOR:23:DP-2] > [ 12.399005] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 12.406448] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 12.414481] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 12.420043] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] disconnected > [ 12.420073] [drm:drm_mode_getconnector], [CONNECTOR:23:?] > [ 12.420078] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] > [ 12.420081] [drm:intel_dp_detect], [CONNECTOR:23:DP-2] > [ 12.422480] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 12.431057] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 12.438429] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 12.444054] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] disconnected > [ 12.444096] [drm:drm_mode_getconnector], [CONNECTOR:25:?] > [ 12.444102] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] > [ 12.444105] [drm:intel_dp_detect], [CONNECTOR:25:DP-3] > [ 12.446506] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 12.446577] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr,commit=0 > [ 12.454458] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 12.462459] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 12.468092] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] disconnected > [ 12.468117] [drm:drm_mode_getconnector], [CONNECTOR:25:?] > [ 12.468123] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] > [ 12.468126] [drm:intel_dp_detect], [CONNECTOR:25:DP-3] > [ 12.470525] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 12.478496] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 12.486449] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 12.492072] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] disconnected > [ 14.117491] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X > [ 14.220373] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X > [ 14.220809] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 19.208223] [drm:drm_mode_getconnector], [CONNECTOR:5:?] > [ 19.208233] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] > [ 19.208236] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1] > [ 19.208256] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : > [ 19.208261] [drm:drm_mode_debug_printmodeline], Modeline 8:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa > [ 19.208266] [drm:drm_mode_getconnector], [CONNECTOR:5:?] > [ 19.208607] [drm:drm_mode_getconnector], [CONNECTOR:12:?] > [ 19.208613] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] > [ 19.208616] [drm:intel_crt_detect], [CONNECTOR:12:VGA-1] force=1 > [ 19.216054] [drm:intel_crt_detect], CRT not detected via hotplug > [ 19.220280] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) > [ 19.220287] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 19.220290] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 19.220294] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 19.220618] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 19.220621] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 19.220624] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] > [ 19.220629] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected > [ 19.220640] [drm:drm_mode_getconnector], [CONNECTOR:12:?] > [ 19.220645] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] > [ 19.220649] [drm:intel_crt_detect], [CONNECTOR:12:VGA-1] force=1 > [ 19.228033] [drm:intel_crt_detect], CRT not detected via hotplug > [ 19.232186] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) > [ 19.232192] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 19.232196] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 19.232199] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 19.232521] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 19.232525] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 19.232528] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] > [ 19.232532] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected > [ 19.232563] [drm:drm_mode_getconnector], [CONNECTOR:15:?] > [ 19.232569] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] > [ 19.232572] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1] > [ 19.244708] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb > [ 19.244713] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected > [ 19.244737] [drm:drm_mode_getconnector], [CONNECTOR:15:?] > [ 19.244742] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] > [ 19.244745] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1] > [ 19.256851] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb > [ 19.256855] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected > [ 19.256888] [drm:drm_mode_getconnector], [CONNECTOR:19:?] > [ 19.256893] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] > [ 19.256896] [drm:intel_dp_detect], [CONNECTOR:19:DP-1] > [ 19.259326] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.266549] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.274545] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.280182] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected > [ 19.280220] [drm:drm_mode_getconnector], [CONNECTOR:19:?] > [ 19.280231] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] > [ 19.280238] [drm:intel_dp_detect], [CONNECTOR:19:DP-1] > [ 19.282696] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.290619] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.298597] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.304199] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected > [ 19.304249] [drm:drm_mode_getconnector], [CONNECTOR:21:?] > [ 19.304260] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] > [ 19.304267] [drm:intel_hdmi_detect], [CONNECTOR:21:HDMI-A-2] > [ 19.308318] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) > [ 19.308329] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc > [ 19.308336] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected > [ 19.308370] [drm:drm_mode_getconnector], [CONNECTOR:21:?] > [ 19.308380] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] > [ 19.308386] [drm:intel_hdmi_detect], [CONNECTOR:21:HDMI-A-2] > [ 19.312231] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) > [ 19.312242] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc > [ 19.312251] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected > [ 19.312281] [drm:drm_mode_getconnector], [CONNECTOR:23:?] > [ 19.312291] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] > [ 19.312300] [drm:intel_dp_detect], [CONNECTOR:23:DP-2] > [ 19.314724] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.322610] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.330639] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.336159] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] disconnected > [ 19.336193] [drm:drm_mode_getconnector], [CONNECTOR:23:?] > [ 19.336204] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] > [ 19.336211] [drm:intel_dp_detect], [CONNECTOR:23:DP-2] > [ 19.338668] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.346604] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.354659] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.360162] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] disconnected > [ 19.360212] [drm:drm_mode_getconnector], [CONNECTOR:25:?] > [ 19.360223] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] > [ 19.360229] [drm:intel_dp_detect], [CONNECTOR:25:DP-3] > [ 19.362686] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.370617] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.378616] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.388188] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] disconnected > [ 19.388225] [drm:drm_mode_getconnector], [CONNECTOR:25:?] > [ 19.388235] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] > [ 19.388242] [drm:intel_dp_detect], [CONNECTOR:25:DP-3] > [ 19.390698] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.398620] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.406545] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.412185] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] disconnected > [ 19.413989] [drm:drm_mode_getconnector], [CONNECTOR:5:?] > [ 19.414003] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] > [ 19.414011] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1] > [ 19.414048] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : > [ 19.414059] [drm:drm_mode_debug_printmodeline], Modeline 8:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa > [ 19.414071] [drm:drm_mode_getconnector], [CONNECTOR:5:?] > [ 19.414796] [drm:drm_mode_getconnector], [CONNECTOR:12:?] > [ 19.414809] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] > [ 19.414816] [drm:intel_crt_detect], [CONNECTOR:12:VGA-1] force=1 > [ 19.428342] [drm:intel_crt_detect], CRT not detected via hotplug > [ 19.432290] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) > [ 19.432301] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 19.432307] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 19.432313] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 19.432721] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 19.432728] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 19.432734] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] > [ 19.432742] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected > [ 19.432756] [drm:drm_mode_getconnector], [CONNECTOR:12:?] > [ 19.432766] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] > [ 19.432773] [drm:intel_crt_detect], [CONNECTOR:12:VGA-1] force=1 > [ 19.440143] [drm:intel_crt_detect], CRT not detected via hotplug > [ 19.444227] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) > [ 19.444233] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 19.444236] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 19.444239] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 19.444560] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 19.444564] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 19.444567] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] > [ 19.444571] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected > [ 19.444596] [drm:drm_mode_getconnector], [CONNECTOR:15:?] > [ 19.444601] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] > [ 19.444604] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1] > [ 19.456740] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb > [ 19.456744] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected > [ 19.457661] [drm:drm_mode_getconnector], [CONNECTOR:15:?] > [ 19.457667] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] > [ 19.457670] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1] > [ 19.469807] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb > [ 19.469811] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected > [ 19.470240] [drm:drm_mode_getconnector], [CONNECTOR:19:?] > [ 19.470245] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] > [ 19.470248] [drm:intel_dp_detect], [CONNECTOR:19:DP-1] > [ 19.472648] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.482465] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.490459] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.496077] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected > [ 19.496093] [drm:drm_mode_getconnector], [CONNECTOR:19:?] > [ 19.496098] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] > [ 19.496100] [drm:intel_dp_detect], [CONNECTOR:19:DP-1] > [ 19.498498] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.506457] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.514459] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.520070] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected > [ 19.520091] [drm:drm_mode_getconnector], [CONNECTOR:21:?] > [ 19.520096] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] > [ 19.520099] [drm:intel_hdmi_detect], [CONNECTOR:21:HDMI-A-2] > [ 19.524483] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) > [ 19.524487] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc > [ 19.524491] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected > [ 19.524497] [drm:drm_mode_getconnector], [CONNECTOR:21:?] > [ 19.524501] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] > [ 19.524504] [drm:intel_hdmi_detect], [CONNECTOR:21:HDMI-A-2] > [ 19.528455] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) > [ 19.528460] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc > [ 19.528463] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected > [ 19.528475] [drm:drm_mode_getconnector], [CONNECTOR:23:?] > [ 19.528480] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] > [ 19.528483] [drm:intel_dp_detect], [CONNECTOR:23:DP-2] > [ 19.530880] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.538461] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.546470] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.552035] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] disconnected > [ 19.552052] [drm:drm_mode_getconnector], [CONNECTOR:23:?] > [ 19.552057] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] > [ 19.552060] [drm:intel_dp_detect], [CONNECTOR:23:DP-2] > [ 19.554457] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.562459] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.570472] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.576057] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] disconnected > [ 19.576078] [drm:drm_mode_getconnector], [CONNECTOR:25:?] > [ 19.576083] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] > [ 19.576085] [drm:intel_dp_detect], [CONNECTOR:25:DP-3] > [ 19.578483] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.586451] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.594443] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.600057] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] disconnected > [ 19.600072] [drm:drm_mode_getconnector], [CONNECTOR:25:?] > [ 19.600077] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] > [ 19.600080] [drm:intel_dp_detect], [CONNECTOR:25:DP-3] > [ 19.602478] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.610460] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.618472] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.624064] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] disconnected > [ 19.624457] [drm:drm_mode_getconnector], [CONNECTOR:5:?] > [ 19.624463] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] > [ 19.624466] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1] > [ 19.624481] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : > [ 19.624486] [drm:drm_mode_debug_printmodeline], Modeline 8:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa > [ 19.624491] [drm:drm_mode_getconnector], [CONNECTOR:5:?] > [ 19.624772] [drm:drm_mode_getconnector], [CONNECTOR:12:?] > [ 19.624777] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] > [ 19.624780] [drm:intel_crt_detect], [CONNECTOR:12:VGA-1] force=1 > [ 19.632058] [drm:intel_crt_detect], CRT not detected via hotplug > [ 19.636241] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) > [ 19.636245] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 19.636248] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 19.636251] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 19.636560] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 19.636563] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 19.636566] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] > [ 19.636569] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected > [ 19.636575] [drm:drm_mode_getconnector], [CONNECTOR:12:?] > [ 19.636579] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] > [ 19.636581] [drm:intel_crt_detect], [CONNECTOR:12:VGA-1] force=1 > [ 19.644067] [drm:intel_crt_detect], CRT not detected via hotplug > [ 19.648186] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) > [ 19.648190] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 19.648193] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 19.648196] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 19.648505] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 19.648508] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 19.648511] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] > [ 19.648514] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected > [ 19.648533] [drm:drm_mode_getconnector], [CONNECTOR:15:?] > [ 19.648538] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] > [ 19.648541] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1] > [ 19.660702] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb > [ 19.660706] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected > [ 19.661556] [drm:drm_mode_getconnector], [CONNECTOR:15:?] > [ 19.661562] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] > [ 19.661564] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1] > [ 19.673723] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb > [ 19.673727] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected > [ 19.674150] [drm:drm_mode_getconnector], [CONNECTOR:19:?] > [ 19.674155] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] > [ 19.674158] [drm:intel_dp_detect], [CONNECTOR:19:DP-1] > [ 19.676557] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.686457] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.694459] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.700078] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected > [ 19.700094] [drm:drm_mode_getconnector], [CONNECTOR:19:?] > [ 19.700099] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] > [ 19.700101] [drm:intel_dp_detect], [CONNECTOR:19:DP-1] > [ 19.702499] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.710451] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.718450] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.724070] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected > [ 19.724093] [drm:drm_mode_getconnector], [CONNECTOR:21:?] > [ 19.724098] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] > [ 19.724101] [drm:intel_hdmi_detect], [CONNECTOR:21:HDMI-A-2] > [ 19.728354] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) > [ 19.728358] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc > [ 19.728362] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected > [ 19.728376] [drm:drm_mode_getconnector], [CONNECTOR:21:?] > [ 19.728381] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] > [ 19.728383] [drm:intel_hdmi_detect], [CONNECTOR:21:HDMI-A-2] > [ 19.732447] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) > [ 19.732451] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc > [ 19.732455] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected > [ 19.732467] [drm:drm_mode_getconnector], [CONNECTOR:23:?] > [ 19.732471] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] > [ 19.732474] [drm:intel_dp_detect], [CONNECTOR:23:DP-2] > [ 19.734870] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.742451] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.750462] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.756064] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] disconnected > [ 19.756080] [drm:drm_mode_getconnector], [CONNECTOR:23:?] > [ 19.756085] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] > [ 19.756088] [drm:intel_dp_detect], [CONNECTOR:23:DP-2] > [ 19.758485] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.766450] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.774461] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.780065] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] disconnected > [ 19.780086] [drm:drm_mode_getconnector], [CONNECTOR:25:?] > [ 19.780091] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] > [ 19.780093] [drm:intel_dp_detect], [CONNECTOR:25:DP-3] > [ 19.782491] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.790450] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.798465] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.804077] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] disconnected > [ 19.804094] [drm:drm_mode_getconnector], [CONNECTOR:25:?] > [ 19.804098] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] > [ 19.804101] [drm:intel_dp_detect], [CONNECTOR:25:DP-3] > [ 19.806499] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.814471] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.822471] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 19.828056] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] disconnected > [ 20.992151] NET: Registered protocol family 17 > [ 22.191519] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S > [ 22.191918] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 > [ 22.224598] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 23.158032] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X > [ 23.260224] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X > [ 23.260453] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 23.604660] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S > [ 23.605062] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 > [ 23.636678] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 28.560654] wlan0: authenticate with 00:0b:6b:3c:8c:e4 > [ 28.567208] wlan0: send auth to 00:0b:6b:3c:8c:e4 (try 1/3) > [ 28.572353] wlan0: authenticated > [ 28.576284] wlan0: associate with 00:0b:6b:3c:8c:e4 (try 1/3) > [ 28.579491] wlan0: RX AssocResp from 00:0b:6b:3c:8c:e4 (capab=0x431 status=0 aid=3) > [ 28.590345] wlan0: associated > [ 28.590709] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready > [ 28.592239] cfg80211: Calling CRDA for country: NA > [ 28.653970] wlan0: Limiting TX power to 27 (27 - 0) dBm as advertised by 00:0b:6b:3c:8c:e4 > [ 32.665852] [drm:intel_crtc_cursor_set], cursor off > [ 50.122755] PM: Hibernation mode set to 'shutdown' > [ 50.124529] PM: Syncing filesystems ... done. > [ 50.142782] Freezing user space processes ... (elapsed 0.002 seconds) done. > [ 50.145233] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff] > [ 50.145242] PM: Marking nosave pages: [mem 0x7c4a1000-0x7c4a6fff] > [ 50.145245] PM: Marking nosave pages: [mem 0x7c5b7000-0x7c60efff] > [ 50.145250] PM: Marking nosave pages: [mem 0x7c6c6000-0x7c9fefff] > [ 50.145274] PM: Basic memory bitmaps created > [ 50.145277] PM: Preallocating image memory... done (allocated 299546 pages) > [ 50.953248] PM: Allocated 1198184 kbytes in 0.80 seconds (1497.73 MB/s) > [ 50.953252] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. > [ 50.956285] Suspending console(s) (use no_console_suspend to debug) > [ 50.957285] wlan0: deauthenticating from 00:0b:6b:3c:8c:e4 by local choice (reason=3) > [ 50.971657] cfg80211: Calling CRDA to update world regulatory domain > [ 51.008309] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B > [ 51.008589] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 > [ 51.312263] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0 > [ 51.312274] [drm:intel_update_fbc], no output, disabling > [ 51.312881] PM: freeze of devices complete after 356.513 msecs > [ 51.315605] PM: late freeze of devices complete after 2.716 msecs > [ 51.319531] PM: noirq freeze of devices complete after 3.917 msecs > [ 51.319565] Disabling non-boot CPUs ... > [ 51.325788] kvm: disabling virtualization on CPU1 > [ 51.428156] smpboot: CPU 1 is now offline > [ 51.439766] PM: Creating hibernation image: > [ 51.440065] PM: Need to copy 185697 pages > [ 51.440065] PM: Normal pages needed: 185697 + 1024, available pages: 323710 > [ 51.440065] Enabling non-boot CPUs ... > [ 51.441384] x86: Booting SMP configuration: > [ 51.441386] smpboot: Booting Node 0 Processor 1 APIC 0x1 > [ 51.325869] Disabled fast string operations > [ 51.325869] kvm: enabling virtualization on CPU1 > [ 51.455951] CPU1 is up > [ 51.493830] PM: noirq restore of devices complete after 33.991 msecs > [ 51.494901] PM: early restore of devices complete after 0.998 msecs > [ 51.735407] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X > [ 51.737777] usb usb1: root hub lost power or was reset > [ 51.737829] usb usb2: root hub lost power or was reset > [ 51.737877] usb usb3: root hub lost power or was reset > [ 51.737944] usb usb7: root hub lost power or was reset > [ 51.742305] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported > [ 51.742701] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X > [ 51.743331] usb usb4: root hub lost power or was reset > [ 51.743378] usb usb5: root hub lost power or was reset > [ 51.743425] usb usb6: root hub lost power or was reset > [ 51.743472] usb usb8: root hub lost power or was reset > [ 51.747806] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported > [ 51.755170] [drm:intel_opregion_setup], graphic opregion physical addr: 0x7c98b1f3 > [ 51.755205] [drm:intel_opregion_setup], Public ACPI methods supported > [ 51.755206] [drm:intel_opregion_setup], SWSCI supported > [ 51.755251] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio. > [ 51.776112] [drm:swsci_setup], SWSCI BIOS requested (00010673) SBCB callbacks that are not supported (00080673) > [ 51.776116] [drm:swsci_setup], SWSCI GBDA callbacks 00000cf3, SBCB callbacks 00010673 > [ 51.776119] [drm:intel_opregion_setup], ASLE supported > [ 51.776342] dpm_run_callback(): pnp_bus_resume+0x0/0xb0 returns -19 > [ 51.776352] PM: Device 00:09 failed to restore: error -19 > [ 51.776801] [drm:init_status_page], render ring hws offset: 0x00001000 > [ 51.776806] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000 > [ 51.776881] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072 > [ 51.840138] [drm:init_ring_common] *ERROR* render ring initialization failed ctl 0001f001 head 00003004 tail 00000000 start 00003000 > [ 51.840480] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: disabled > [ 51.840508] [drm:intel_modeset_readout_hw_state], [CRTC:4] hw state readout: enabled > [ 51.840518] [drm:intel_modeset_readout_hw_state], [ENCODER:6:LVDS-6] hw state readout: enabled, pipe B > [ 51.840525] [drm:intel_modeset_readout_hw_state], [ENCODER:13:DAC-13] hw state readout: disabled, pipe A > [ 51.840532] [drm:intel_modeset_readout_hw_state], [ENCODER:14:TMDS-14] hw state readout: disabled, pipe A > [ 51.840539] [drm:intel_modeset_readout_hw_state], [ENCODER:18:TMDS-18] hw state readout: disabled, pipe A > [ 51.840545] [drm:intel_modeset_readout_hw_state], [ENCODER:20:TMDS-20] hw state readout: disabled, pipe A > [ 51.840551] [drm:intel_modeset_readout_hw_state], [ENCODER:22:TMDS-22] hw state readout: disabled, pipe A > [ 51.840557] [drm:intel_modeset_readout_hw_state], [ENCODER:24:TMDS-24] hw state readout: disabled, pipe A > [ 51.840565] [drm:intel_modeset_readout_hw_state], [CONNECTOR:5:LVDS-1] hw state readout: enabled > [ 51.840571] [drm:intel_modeset_readout_hw_state], [CONNECTOR:12:VGA-1] hw state readout: disabled > [ 51.840577] [drm:intel_modeset_readout_hw_state], [CONNECTOR:15:HDMI-A-1] hw state readout: disabled > [ 51.840583] [drm:intel_modeset_readout_hw_state], [CONNECTOR:19:DP-1] hw state readout: disabled > [ 51.840589] [drm:intel_modeset_readout_hw_state], [CONNECTOR:21:HDMI-A-2] hw state readout: disabled > [ 51.840598] [drm:intel_modeset_readout_hw_state], [CONNECTOR:23:DP-2] hw state readout: disabled > [ 51.840601] [drm:intel_modeset_readout_hw_state], [CONNECTOR:25:DP-3] hw state readout: disabled > [ 51.840607] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A > [ 51.840608] [drm:intel_dump_pipe_config], cpu_transcoder: A > [ 51.840610] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 > [ 51.840612] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 > [ 51.840614] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 > [ 51.840616] [drm:intel_dump_pipe_config], requested mode: > [ 51.840619] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 > [ 51.840621] [drm:intel_dump_pipe_config], adjusted mode: > [ 51.840623] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 > [ 51.840626] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 > [ 51.840627] [drm:intel_dump_pipe_config], port clock: 0 > [ 51.840629] [drm:intel_dump_pipe_config], pipe src size: 0x0 > [ 51.840631] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 > [ 51.840633] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled > [ 51.840634] [drm:intel_dump_pipe_config], ips: 0 > [ 51.840635] [drm:intel_dump_pipe_config], double wide: 0 > [ 51.840639] [drm:intel_dump_pipe_config], [CRTC:4][setup_hw_state] config for pipe B > [ 51.840641] [drm:intel_dump_pipe_config], cpu_transcoder: B > [ 51.840642] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 > [ 51.840644] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 > [ 51.840647] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 > [ 51.840648] [drm:intel_dump_pipe_config], requested mode: > [ 51.840651] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 800 0 0 0 600 0 0 0 0x0 0x0 > [ 51.840652] [drm:intel_dump_pipe_config], adjusted mode: > [ 51.840655] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa > [ 51.840658] [drm:intel_dump_crtc_timings], crtc timings: 73810 1440 1464 1480 1600 900 903 909 926, type: 0x0 flags: 0xa > [ 51.840660] [drm:intel_dump_pipe_config], port clock: 73810 > [ 51.840661] [drm:intel_dump_pipe_config], pipe src size: 800x600 > [ 51.840663] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 > [ 51.840665] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled > [ 51.840666] [drm:intel_dump_pipe_config], ips: 0 > [ 51.840668] [drm:intel_dump_pipe_config], double wide: 0 > [ 51.840673] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 2 > [ 51.840679] [drm:connected_sink_compute_bpp], [CONNECTOR:5:LVDS-1] checking for sink bpp constrains > [ 51.840683] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18) > [ 51.840687] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1 > [ 51.840689] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A > [ 51.840690] [drm:intel_dump_pipe_config], cpu_transcoder: A > [ 51.840692] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1 > [ 51.840694] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 > [ 51.840696] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 > [ 51.840698] [drm:intel_dump_pipe_config], requested mode: > [ 51.840701] [drm:drm_mode_debug_printmodeline], Modeline 0:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa > [ 51.840702] [drm:intel_dump_pipe_config], adjusted mode: > [ 51.840706] [drm:drm_mode_debug_printmodeline], Modeline 0:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa > [ 51.840709] [drm:intel_dump_crtc_timings], crtc timings: 74080 1440 1464 1480 1600 900 903 909 926, type: 0x48 flags: 0xa > [ 51.840710] [drm:intel_dump_pipe_config], port clock: 74080 > [ 51.840712] [drm:intel_dump_pipe_config], pipe src size: 1440x900 > [ 51.840714] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 > [ 51.840716] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled > [ 51.840717] [drm:intel_dump_pipe_config], ips: 0 > [ 51.840719] [drm:intel_dump_pipe_config], double wide: 0 > [ 51.840730] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 > [ 51.840809] [drm:asle_work], No request on ASLC interrupt 0x00000000 > [ 52.064143] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 52.065231] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded > [ 52.065239] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out > [ 52.065244] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out > [ 52.067182] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded > [ 52.067189] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out > [ 52.067194] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out > [ 52.067496] ata1.00: configured for UDMA/133 > [ 52.068202] ata2: SATA link down (SStatus 0 SControl 300) > [ 52.076183] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0 > [ 52.076212] [drm:i9xx_get_refclk], using SSC reference clock of 100000 kHz > [ 52.076299] [drm:i9xx_set_pipeconf], disabling CxSR downclocking > [ 52.076358] [drm:i9xx_update_plane], Writing base 01938000 00000000 0 0 6144 > [ 52.076366] [drm:intel_crtc_mode_set], [ENCODER:6:LVDS-6] set [MODE:0:1440x900] > [ 52.077083] [drm:g4x_check_srwm], SR watermark: display plane 58, cursor 6 > [ 52.077086] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=26, cursor=6, B: plane=2, cursor=2, SR: plane=58, cursor=6 > [ 52.080387] sd 0:0:0:0: [sda] Starting disk > [ 52.140162] [drm:intel_update_fbc], disabled per chip default > [ 52.192781] usb 2-1: reset full-speed USB device number 4 using uhci_hcd > [ 52.236111] [drm:intel_panel_enable_backlight], pipe A > [ 52.236120] [drm:intel_panel_actually_set_backlight], set backlight PWM = 3211215 > [ 52.236171] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 0 > [ 52.236181] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1] > [ 52.236196] [drm:check_encoder_state], [ENCODER:6:LVDS-6] > [ 52.236202] [drm:check_encoder_state], [ENCODER:13:DAC-13] > [ 52.236207] [drm:check_encoder_state], [ENCODER:14:TMDS-14] > [ 52.236212] [drm:check_encoder_state], [ENCODER:18:TMDS-18] > [ 52.236217] [drm:check_encoder_state], [ENCODER:20:TMDS-20] > [ 52.236222] [drm:check_encoder_state], [ENCODER:22:TMDS-22] > [ 52.236227] [drm:check_encoder_state], [ENCODER:24:TMDS-24] > [ 52.236233] [drm:check_crtc_state], [CRTC:3] > [ 52.236261] [drm:check_crtc_state], [CRTC:4] > [ 52.236279] [drm:intel_resume_hotplug], running encoder hotplug functions > [ 52.236286] [drm:intel_crt_detect], [CONNECTOR:12:VGA-1] force=0 > [ 52.236305] [drm:asle_work], No request on ASLC interrupt 0x00000000 > [ 52.244164] [drm:intel_crt_detect], CRT not detected via hotplug > [ 52.248188] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) > [ 52.248195] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 52.248198] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 52.248203] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 52.248635] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 52.248639] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 52.248642] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] > [ 52.248648] [drm:drm_helper_hpd_irq_event], [CONNECTOR:12:VGA-1] status updated from unknown to disconnected > [ 52.248653] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1] > [ 52.268903] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb > [ 52.268910] [drm:drm_helper_hpd_irq_event], [CONNECTOR:15:HDMI-A-1] status updated from unknown to disconnected > [ 52.268916] [drm:intel_dp_detect], [CONNECTOR:19:DP-1] > [ 52.271422] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 52.278462] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 52.286493] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 52.292115] [drm:drm_helper_hpd_irq_event], [CONNECTOR:19:DP-1] status updated from unknown to disconnected > [ 52.292119] [drm:intel_hdmi_detect], [CONNECTOR:21:HDMI-A-2] > [ 52.296168] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) > [ 52.296175] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc > [ 52.296182] [drm:drm_helper_hpd_irq_event], [CONNECTOR:21:HDMI-A-2] status updated from unknown to disconnected > [ 52.296186] [drm:intel_dp_detect], [CONNECTOR:23:DP-2] > [ 52.298641] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 52.306522] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 52.314607] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 52.320112] [drm:drm_helper_hpd_irq_event], [CONNECTOR:23:DP-2] status updated from unknown to disconnected > [ 52.320116] [drm:intel_dp_detect], [CONNECTOR:25:DP-3] > [ 52.322537] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 52.330543] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 52.338558] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 52.344145] [drm:drm_helper_hpd_irq_event], [CONNECTOR:25:DP-3] status updated from unknown to disconnected > [ 52.344943] dpm_run_callback(): pci_pm_restore+0x0/0xf0 returns -5 > [ 52.344958] PM: Device 0000:00:02.0 failed to restore async: error -5 > [ 52.359461] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S > [ 52.359856] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 > [ 52.444338] usb 2-2: reset full-speed USB device number 5 using uhci_hcd > [ 52.604674] PM: restore of devices complete after 871.176 msecs > [ 53.085032] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 > [ 53.448490] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 > [ 53.468116] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input15 > [ 53.476316] PM: Image restored successfully. > [ 53.476378] PM: Basic memory bitmaps freed > [ 53.476384] Restarting tasks ... done. > [ 53.484090] video LNXVIDEO:00: Restoring backlight state > [ 53.492514] [drm:asle_set_backlight], bclp = 0x800000ff > [ 53.492521] [drm:asle_set_backlight], updating opregion backlight 255/255 > [ 53.492526] [drm:intel_panel_actually_set_backlight], set backlight PWM = 3211215 > [ 53.492543] [drm:asle_set_pwm_freq], PWM freq is not supported > [ 53.492556] [drm:asle_work], No request on ASLC interrupt 0x00010000 > [ 53.519751] [drm:intel_dp_detect], [CONNECTOR:19:DP-1] > [ 53.522160] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 53.522342] [drm:drm_mode_getconnector], [CONNECTOR:5:?] > [ 53.530564] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 53.538449] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 53.544341] [drm:intel_dp_detect], [CONNECTOR:23:DP-2] > [ 53.546744] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 53.552384] cfg80211: World regulatory domain updated: > [ 53.552389] cfg80211: DFS Master region: unset > [ 53.552391] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) > [ 53.552394] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > [ 53.552397] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) > [ 53.552399] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) > [ 53.552402] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > [ 53.552404] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > [ 53.554477] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 53.562481] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 53.568077] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] > [ 53.568082] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1] > [ 53.568101] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : > [ 53.568106] [drm:drm_mode_debug_printmodeline], Modeline 8:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa > [ 53.568118] [drm:drm_mode_getconnector], [CONNECTOR:5:?] > [ 53.568179] [drm:intel_dp_detect], [CONNECTOR:25:DP-3] > [ 53.570582] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 53.582536] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 53.590597] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 53.596403] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1] > [ 53.596818] [drm:drm_mode_getconnector], [CONNECTOR:12:?] > [ 53.616766] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb > [ 53.617123] [drm:intel_hdmi_detect], [CONNECTOR:21:HDMI-A-2] > [ 53.620161] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) > [ 53.620167] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc > [ 53.620292] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] > [ 53.620298] [drm:intel_crt_detect], [CONNECTOR:12:VGA-1] force=1 > [ 53.628087] [drm:intel_crt_detect], CRT not detected via hotplug > [ 53.632189] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) > [ 53.632200] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 53.632210] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 53.632217] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 53.632633] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 53.632639] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 53.632645] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] > [ 53.632656] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected > [ 53.632682] [drm:drm_mode_getconnector], [CONNECTOR:12:?] > [ 53.632690] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1] > [ 53.632763] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] > [ 53.632771] [drm:intel_crt_detect], [CONNECTOR:12:VGA-1] force=1 > [ 53.640159] [drm:intel_crt_detect], CRT not detected via hotplug > [ 53.644188] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) > [ 53.644200] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 53.644206] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 53.644213] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 53.644624] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 53.644631] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 53.644637] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] > [ 53.644645] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected > [ 53.644680] [drm:drm_mode_getconnector], [CONNECTOR:15:?] > [ 53.644692] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] > [ 53.644699] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1] > [ 53.664974] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb > [ 53.664983] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected > [ 53.665049] [drm:drm_mode_getconnector], [CONNECTOR:15:?] > [ 53.665063] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] > [ 53.665070] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1] > [ 53.680851] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb > [ 53.680860] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected > [ 53.680927] [drm:drm_mode_getconnector], [CONNECTOR:19:?] > [ 53.680935] [drm:intel_crt_detect], [CONNECTOR:12:VGA-1] force=1 > [ 53.688180] [drm:intel_crt_detect], CRT not detected via hotplug > [ 53.692189] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) > [ 53.692203] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 53.692210] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 53.692217] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 53.692659] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 53.692667] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 53.692673] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] > [ 53.693125] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] > [ 53.693134] [drm:intel_dp_detect], [CONNECTOR:19:DP-1] > [ 53.695556] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 53.702527] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 53.710487] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 53.716051] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected > [ 53.716060] [drm:drm_mode_getconnector], [CONNECTOR:19:?] > [ 53.716064] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] > [ 53.716067] [drm:intel_dp_detect], [CONNECTOR:19:DP-1] > [ 53.718466] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 53.726493] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 53.734480] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 53.740068] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected > [ 53.740090] [drm:drm_mode_getconnector], [CONNECTOR:21:?] > [ 53.740096] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] > [ 53.740099] [drm:intel_hdmi_detect], [CONNECTOR:21:HDMI-A-2] > [ 53.744330] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) > [ 53.744335] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc > [ 53.744338] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected > [ 53.744344] [drm:drm_mode_getconnector], [CONNECTOR:21:?] > [ 53.744348] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] > [ 53.744351] [drm:intel_hdmi_detect], [CONNECTOR:21:HDMI-A-2] > [ 53.748283] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) > [ 53.748287] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc > [ 53.748290] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected > [ 53.748302] [drm:drm_mode_getconnector], [CONNECTOR:23:?] > [ 53.748307] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] > [ 53.748309] [drm:intel_dp_detect], [CONNECTOR:23:DP-2] > [ 53.750708] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 53.758466] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 53.766459] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 53.772071] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] disconnected > [ 53.772078] [drm:drm_mode_getconnector], [CONNECTOR:23:?] > [ 53.772082] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] > [ 53.772085] [drm:intel_dp_detect], [CONNECTOR:23:DP-2] > [ 53.774482] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 53.782475] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 53.790457] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 53.796066] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] disconnected > [ 53.796080] [drm:drm_mode_getconnector], [CONNECTOR:25:?] > [ 53.796084] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] > [ 53.796087] [drm:intel_dp_detect], [CONNECTOR:25:DP-3] > [ 53.798485] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 53.806477] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 53.814457] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 53.820194] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] disconnected > [ 53.820202] [drm:drm_mode_getconnector], [CONNECTOR:25:?] > [ 53.820207] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] > [ 53.820210] [drm:intel_dp_detect], [CONNECTOR:25:DP-3] > [ 53.822610] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 53.834550] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 53.842561] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 53.848167] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] disconnected > [ 54.428394] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S > [ 54.428794] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 > [ 54.458019] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 55.058772] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X > [ 55.160360] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X > [ 55.160765] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 59.041479] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S > [ 59.041880] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 > [ 59.074124] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 63.497156] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S > [ 63.497555] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 > [ 63.525237] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 64.074683] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X > [ 64.176250] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X > [ 64.176644] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 64.550243] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S > [ 64.550645] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 > [ 64.582086] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 66.684345] wlan0: authenticate with 00:1a:1e:a6:f9:c9 > [ 66.687689] wlan0: send auth to 00:1a:1e:a6:f9:c9 (try 1/3) > [ 66.687832] wlan0: deauthenticating from 00:1a:1e:a6:f9:c9 by local choice (reason=3) > [ 66.698106] wlan0: authenticate with 00:1a:1e:a6:f9:c1 > [ 66.701386] wlan0: send auth to 00:1a:1e:a6:f9:c1 (try 1/3) > [ 66.702393] wlan0: deauthenticating from 00:1a:1e:a6:f9:c1 by local choice (reason=3) > [ 66.703885] wlan0: authenticate with 00:1a:1e:a6:f7:61 > [ 66.707023] wlan0: send auth to 00:1a:1e:a6:f7:61 (try 1/3) > [ 66.709258] wlan0: authenticated > [ 66.709310] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP > [ 66.709314] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP > [ 66.712100] wlan0: associate with 00:1a:1e:a6:f7:61 (try 1/3) > [ 66.723794] wlan0: RX AssocResp from 00:1a:1e:a6:f7:61 (capab=0x431 status=0 aid=4) > [ 66.727192] wlan0: associated > [ 66.727308] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready > [ 66.727493] cfg80211: Calling CRDA for country: CZ > [ 66.732797] cfg80211: Regulatory domain changed to country: CZ > [ 66.732801] cfg80211: DFS Master region: unset > [ 66.732803] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) > [ 66.732807] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) > [ 66.732809] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) > [ 66.732812] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) > [ 66.732814] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) > [ 66.969780] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:1a:1e:a6:f7:61 > [ 121.711266] [drm:intel_crtc_cursor_set], cursor off > [ 122.870600] [drm:intel_crtc_cursor_set], cursor off > [ 124.183193] [drm:intel_crtc_cursor_set], cursor off > [ 127.951165] [drm:intel_crtc_cursor_set], cursor off > [ 128.304448] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) > [ 128.304465] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=1 > [ 128.304471] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] > [ 128.304616] [drm:i9xx_update_plane], Writing base 00046000 00000000 0 0 5760 > [ 128.312225] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] > [ 128.312235] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0 > [ 128.312240] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] > [ 128.312251] [drm:drm_fb_helper_hotplug_event], > [ 128.312255] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] > [ 128.312259] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1] > [ 128.312316] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : > [ 128.312324] [drm:drm_mode_debug_printmodeline], Modeline 8:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa > [ 128.312328] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] > [ 128.312332] [drm:intel_crt_detect], [CONNECTOR:12:VGA-1] force=1 > [ 128.320210] [drm:intel_crt_detect], CRT not detected via hotplug > [ 128.324249] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) > [ 128.324259] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 128.324261] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 128.324263] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 128.324591] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga > [ 128.324592] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 128.324594] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] > [ 128.324596] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected > [ 128.324599] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] > [ 128.324601] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1] > [ 128.337418] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb > [ 128.337421] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected > [ 128.337423] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] > [ 128.337426] [drm:intel_dp_detect], [CONNECTOR:19:DP-1] > [ 128.339883] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 128.346529] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 128.354475] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 128.360084] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected > [ 128.360089] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] > [ 128.360093] [drm:intel_hdmi_detect], [CONNECTOR:21:HDMI-A-2] > [ 128.364208] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) > [ 128.364213] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc > [ 128.364218] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected > [ 128.364222] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] > [ 128.364226] [drm:intel_dp_detect], [CONNECTOR:23:DP-2] > [ 128.366679] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 128.374528] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 128.382540] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 128.388112] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] disconnected > [ 128.388117] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] > [ 128.388121] [drm:intel_dp_detect], [CONNECTOR:25:DP-3] > [ 128.390542] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 128.398538] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 128.406616] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 > [ 128.412206] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] disconnected > [ 128.412214] [drm:drm_setup_crtcs], > [ 128.412223] [drm:drm_enable_connectors], connector 5 enabled? yes > [ 128.412226] [drm:drm_enable_connectors], connector 12 enabled? no > [ 128.412229] [drm:drm_enable_connectors], connector 15 enabled? no > [ 128.412232] [drm:drm_enable_connectors], connector 19 enabled? no > [ 128.412234] [drm:drm_enable_connectors], connector 21 enabled? no > [ 128.412237] [drm:drm_enable_connectors], connector 23 enabled? no > [ 128.412240] [drm:drm_enable_connectors], connector 25 enabled? no > [ 128.412244] [drm:drm_target_preferred], looking for cmdline mode on connector 5 > [ 128.412247] [drm:drm_target_preferred], looking for preferred mode on connector 5 > [ 128.412250] [drm:drm_target_preferred], found mode 1440x900 > [ 128.412253] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config > [ 128.412261] [drm:drm_setup_crtcs], desired mode 1440x900 set on crtc 3 > [ 128.412303] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) > [ 128.412313] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 > [ 128.412318] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] > [ 128.412324] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] > [ 128.412332] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0 > [ 128.412336] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] > [ 128.412349] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) > [ 128.412356] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 > [ 128.412360] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] > [ 128.412398] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) > [ 128.412406] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 > [ 128.412410] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] > > -- > Jiri Kosina > SUSE Labs > -- Jiri Kosina SUSE Labs _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/intel-gfx
