From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> According to BSpec the entire MI_DISPLAY_FLIP packet must be contained in a single cacheline. Make sure that happens. v2: Use intel_ring_begin_cacheline_safe() v3: Use intel_ring_cacheline_align() (Chris) Cc: Bjoern C <lkml@xxxxxxxxxxxx> Cc: Alexandru DAMIAN <alexandru.damian@xxxxxxxxx> Cc: Enrico Tagliavini <enrico.tagliavini@xxxxxxxxx> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74053 Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> --- drivers/gpu/drm/i915/intel_display.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 0c25310..37527d4 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8609,6 +8609,20 @@ static int intel_gen7_queue_flip(struct drm_device *dev, if (ring->id == RCS) len += 6; + /* + * BSpec MI_DISPLAY_FLIP for IVB: + * "The full packet must be contained within the same cache line." + * + * Currently the LRI+SRM+MI_DISPLAY_FLIP all fit within the same + * cacheline, if we ever start emitting more commands before + * the MI_DISPLAY_FLIP we may need to first emit everything else, + * then do the cacheline alignment, and finally emit the + * MI_DISPLAY_FLIP. + */ + ret = intel_ring_cacheline_align(ring); + if (ret) + goto err_unpin; + ret = intel_ring_begin(ring, len); if (ret) goto err_unpin; -- 1.8.3.2 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/intel-gfx