Hi Ville,
Here is the full dmesg with drm.debug=0xe
(extra patches above rc2 are from tiwai (alsa) and a local patch for
stopping HDD on reboot)
Bruno
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.13.0-rc2-00035-gda75339 (kbuild@neptune) (gcc version 4.7.3 (Gentoo 4.7.3-r1 p1.3, pie-0.5.5) ) #2 Wed Dec 4 20:20:22 CET 2013
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007dedffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007dee0000-0x000000007deebfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007deec000-0x000000007defffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007df00000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffbfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffffc00-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: Acer TravelMate 660/TravelMate 660, BIOS 3A19 01/14/2004
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7dee0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07DF00000 mask FFFF00000 uncachable
[ 0.000000] 2 base 07E000000 mask FFE000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[ 0.000000] [mem 0x37000000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x01a64000, 0x01a64fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x7db58000-0x7dedffff]
[ 0.000000] Allocated new RAMDISK: [mem 0x37476000-0x377fd25f]
[ 0.000000] Move RAMDISK from [mem 0x7db58000-0x7dedf25f] to [mem 0x37476000-0x377fd25f]
[ 0.000000] ACPI: RSDP 000f6050 000014 (v00 ACER )
[ 0.000000] ACPI: RSDT 7dee5a39 000030 (v01 ACER Wagtail 20020114 LTP 00000000)
[ 0.000000] ACPI: FACP 7deebf2c 000074 (v01 ACER Wagtail 20020114 PTL 00000050)
[ 0.000000] ACPI: DSDT 7dee5a69 0064C3 (v01 ACER Wagtail 20020114 MSFT 0100000E)
[ 0.000000] ACPI: FACS 7defcfc0 000040
[ 0.000000] ACPI: HPET 7deebfa0 000038 (v01 ACER Wagtail 20020114 PTL 00000000)
[ 0.000000] ACPI: BOOT 7deebfd8 000028 (v01 ACER Wagtail 20020114 LTP 00000001)
[ 0.000000] 1126MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x01a65000, 0x01a65fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x7dedffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7dedffff]
[ 0.000000] On node 0 totalpages: 515710
[ 0.000000] free_area_init_node: node 0, pgdat c196b700, node_mem_map f64b6020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2254 pages used for memmap
[ 0.000000] HighMem zone: 288482 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0x0 is invalid
[ 0.000000] Local APIC disabled by BIOS -- reenabling.
[ 0.000000] Found and enabled local APIC!
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] e820: [mem 0x80000000-0xfec0ffff] available for PCI devices
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 513934
[ 0.000000] Kernel command line: hpet=force lapic BOOT_IMAGE=3.13r2-home ro root=802 slub_debug=FZP keymap=be-latin1 softlevel=default drm.debug=0xe
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007dee0)
[ 0.000000] Memory: 2031508K/2062840K available (6463K kernel code, 384K rwdata, 2820K rodata, 404K init, 520K bss, 31332K reserved, 1153928K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1974000 - 0xc19d9000 ( 404 kB)
.data : 0xc16501d8 - 0xc19730c0 (3211 kB)
.text : 0xc1000000 - 0xc16501d8 (6464 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f5c08000 soft=f5c0a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1495.298 MHz processor
[ 0.010002] Calibrating delay loop (skipped), value calculated using timer frequency.. 2990.59 BogoMIPS (lpj=14952980)
[ 0.010115] pid_max: default: 32768 minimum: 301
[ 0.010312] Mount-cache hash table entries: 512
[ 0.010993] mce: CPU supports 5 MCE banks
[ 0.011070] CPU0: Thermal monitoring enabled (TM2)
[ 0.011142] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
tlb_flushall_shift: 6
[ 0.011244] CPU: Intel(R) Pentium(R) M processor 1500MHz (fam: 06, model: 09, stepping: 05)
[ 0.011467] ACPI: Core revision 20131115
[ 0.044422] ACPI: All ACPI Tables successfully acquired
[ 0.044541] ACPI: setting ELCR to 0200 (from 0c00)
[ 0.050241] Performance Events: p6 PMU driver.
[ 0.050334] ... version: 0
[ 0.050387] ... bit width: 32
[ 0.050440] ... generic registers: 2
[ 0.050491] ... value mask: 00000000ffffffff
[ 0.050546] ... max period: 000000007fffffff
[ 0.050599] ... fixed-purpose events: 0
[ 0.050651] ... event mask: 0000000000000003
[ 0.051056] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.060000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.060000] devtmpfs: initialized
[ 0.060000] PM: Registering ACPI NVS region [mem 0x7deec000-0x7defffff] (81920 bytes)
[ 0.060000] NET: Registered protocol family 16
[ 0.060000] cpuidle: using governor ladder
[ 0.060000] cpuidle: using governor menu
[ 0.060000] ACPI: bus type PCI registered
[ 0.060000] PCI: PCI BIOS revision 2.10 entry at 0xfd742, last bus=2
[ 0.060000] PCI: Using configuration type 1 for base access
[ 0.065642] bio: create slab <bio-0> at 0
[ 0.065980] ACPI: Added _OSI(Module Device)
[ 0.066034] ACPI: Added _OSI(Processor Device)
[ 0.066086] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.066139] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.083272] ACPI: Interpreter enabled
[ 0.083272] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.083272] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.083272] ACPI: (supports S0 S3 S5)
[ 0.083272] ACPI: Using PIC for interrupt routing
[ 0.083272] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.085792] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.141868] ACPI: Power Resource [PFN0] (off)
[ 0.142789] ACPI: Power Resource [PFN1] (off)
[ 0.146998] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.147068] acpi PNP0A03:00: _OSC: OS supports [Segments MSI]
[ 0.147154] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.155346] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.155351] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.155355] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.155359] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[ 0.155362] acpi PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.155366] acpi PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.155369] acpi PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[ 0.155374] acpi PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
[ 0.155383] PCI: root bus 00: using default resources
[ 0.155390] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.155599] PCI host bridge to bus 0000:00
[ 0.155655] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.155713] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.155773] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.155847] pci 0000:00:00.0: [8086:3580] type 00 class 0x060000
[ 0.156094] pci 0000:00:00.1: [8086:3584] type 00 class 0x088000
[ 0.156344] pci 0000:00:00.3: [8086:3585] type 00 class 0x088000
[ 0.156581] pci 0000:00:02.0: [8086:3582] type 00 class 0x030000
[ 0.156594] pci 0000:00:02.0: reg 0x10: [mem 0xe8000000-0xefffffff pref]
[ 0.156602] pci 0000:00:02.0: reg 0x14: [mem 0xe0000000-0xe007ffff]
[ 0.156609] pci 0000:00:02.0: reg 0x18: [io 0x1800-0x1807]
[ 0.156639] pci 0000:00:02.0: supports D1
[ 0.156854] pci 0000:00:02.1: [8086:3582] type 00 class 0x038000
[ 0.156865] pci 0000:00:02.1: reg 0x10: [mem 0xf0000000-0xf7ffffff pref]
[ 0.156872] pci 0000:00:02.1: reg 0x14: [mem 0xe0080000-0xe00fffff]
[ 0.156906] pci 0000:00:02.1: supports D1
[ 0.157142] pci 0000:00:1d.0: [8086:24c2] type 00 class 0x0c0300
[ 0.157184] pci 0000:00:1d.0: reg 0x20: [io 0x1820-0x183f]
[ 0.157501] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.157701] pci 0000:00:1d.1: [8086:24c4] type 00 class 0x0c0300
[ 0.157743] pci 0000:00:1d.1: reg 0x20: [io 0x1840-0x185f]
[ 0.158038] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.158202] pci 0000:00:1d.2: [8086:24c7] type 00 class 0x0c0300
[ 0.158244] pci 0000:00:1d.2: reg 0x20: [io 0x1860-0x187f]
[ 0.158535] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.158707] pci 0000:00:1d.7: [8086:24cd] type 00 class 0x0c0320
[ 0.158728] pci 0000:00:1d.7: reg 0x10: [mem 0xe0100000-0xe01003ff]
[ 0.158815] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.159038] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060400
[ 0.159275] pci 0000:00:1f.0: [8086:24cc] type 00 class 0x060100
[ 0.159334] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.159346] pci 0000:00:1f.0: address space collision: [io 0x1000-0x107f] conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000]
[ 0.159435] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH4 GPIO
[ 0.159691] pci 0000:00:1f.1: [8086:24ca] type 00 class 0x01018a
[ 0.159705] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 0.159715] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 0.159725] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
[ 0.159735] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.159746] pci 0000:00:1f.1: reg 0x20: [io 0x1810-0x181f]
[ 0.159756] pci 0000:00:1f.1: reg 0x24: [mem 0x00000000-0x000003ff]
[ 0.159982] pci 0000:00:1f.3: [8086:24c3] type 00 class 0x0c0500
[ 0.160026] pci 0000:00:1f.3: reg 0x20: [io 0x1880-0x189f]
[ 0.160245] pci 0000:00:1f.5: [8086:24c5] type 00 class 0x040100
[ 0.160261] pci 0000:00:1f.5: reg 0x10: [io 0x1c00-0x1cff]
[ 0.160271] pci 0000:00:1f.5: reg 0x14: [io 0x18c0-0x18ff]
[ 0.160281] pci 0000:00:1f.5: reg 0x18: [mem 0xe0100c00-0xe0100dff]
[ 0.160290] pci 0000:00:1f.5: reg 0x1c: [mem 0xe0100800-0xe01008ff]
[ 0.160332] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.160544] pci 0000:00:1f.6: [8086:24c6] type 00 class 0x070300
[ 0.160560] pci 0000:00:1f.6: reg 0x10: [io 0x2400-0x24ff]
[ 0.160569] pci 0000:00:1f.6: reg 0x14: [io 0x2000-0x207f]
[ 0.160623] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.160772] pci 0000:00:1f.6: System wakeup disabled by ACPI
[ 0.161014] pci 0000:02:02.0: [14e4:4401] type 00 class 0x020000
[ 0.161030] pci 0000:02:02.0: reg 0x10: [mem 0xe0204000-0xe0205fff]
[ 0.161089] pci 0000:02:02.0: supports D1 D2
[ 0.161092] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.161176] pci 0000:02:02.0: System wakeup disabled by ACPI
[ 0.161342] pci 0000:02:04.0: [8086:1043] type 00 class 0x028000
[ 0.161359] pci 0000:02:04.0: reg 0x10: [mem 0xe0206000-0xe0206fff]
[ 0.161501] pci 0000:02:04.0: System wakeup disabled by ACPI
[ 0.161658] pci 0000:02:06.0: [1217:7113] type 02 class 0x060700
[ 0.161675] pci 0000:02:06.0: reg 0x10: [mem 0xe0207000-0xe0207fff]
[ 0.161701] pci 0000:02:06.0: supports D1 D2
[ 0.161704] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.161859] pci 0000:02:06.1: [1217:7113] type 02 class 0x060700
[ 0.161876] pci 0000:02:06.1: reg 0x10: [mem 0xe0208000-0xe0208fff]
[ 0.161901] pci 0000:02:06.1: supports D1 D2
[ 0.161905] pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.162062] pci 0000:02:07.0: [104c:8026] type 00 class 0x0c0010
[ 0.162079] pci 0000:02:07.0: reg 0x10: [mem 0xe0209000-0xe02097ff]
[ 0.162089] pci 0000:02:07.0: reg 0x14: [mem 0xe0200000-0xe0203fff]
[ 0.162147] pci 0000:02:07.0: supports D1 D2
[ 0.162150] pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot
[ 0.162230] pci 0000:02:07.0: System wakeup disabled by ACPI
[ 0.162410] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[ 0.162469] pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff]
[ 0.162475] pci 0000:00:1e.0: bridge window [mem 0xe0200000-0xe07fffff]
[ 0.162482] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.162487] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.162492] pci 0000:02:06.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.162661] pci_bus 0000:03: busn_res: can not insert [bus 03-ff] under [bus 02] (conflicts with (null) [bus 02])
[ 0.162668] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 06
[ 0.162673] pci_bus 0000:03: busn_res: can not insert [bus 03-06] under [bus 02] (conflicts with (null) [bus 02])
[ 0.162679] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02]
[ 0.162837] pci_bus 0000:07: busn_res: can not insert [bus 07-ff] under [bus 02] (conflicts with (null) [bus 02])
[ 0.162843] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 0a
[ 0.162848] pci_bus 0000:07: busn_res: can not insert [bus 07-0a] under [bus 02] (conflicts with (null) [bus 02])
[ 0.162854] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:02 [bus 02]
[ 0.162936] pci_bus 0000:00: on NUMA node 0
[ 0.163942] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
[ 0.164622] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
[ 0.165297] ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
[ 0.165969] ACPI: PCI Interrupt Link [LNKD] (IRQs 10) *11
[ 0.166668] ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *11
[ 0.167360] ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
[ 0.168079] ACPI: PCI Interrupt Link [LNKG] (IRQs 11) *0, disabled.
[ 0.168801] ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
[ 0.175415] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.175415] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.175415] Found 1 acpi root devices
[ 0.175415] ACPI : EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
[ 0.175415] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.175415] vgaarb: loaded
[ 0.175415] vgaarb: bridge control possible 0000:00:02.0
[ 0.175415] SCSI subsystem initialized
[ 0.175415] libata version 3.00 loaded.
[ 0.175415] ACPI: bus type USB registered
[ 0.175415] usbcore: registered new interface driver usbfs
[ 0.175415] usbcore: registered new interface driver hub
[ 0.175415] usbcore: registered new device driver usb
[ 0.175415] Linux video capture interface: v2.00
[ 0.175415] wmi: Mapper loaded
[ 0.175415] Advanced Linux Sound Architecture Driver Initialized.
[ 0.175415] PCI: Using ACPI for IRQ routing
[ 0.175415] PCI: pci_cache_line_size set to 64 bytes
[ 0.175415] Expanded resource reserved due to conflict with Adapter ROM
[ 0.175415] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.175415] e820: reserve RAM buffer [mem 0x7dee0000-0x7fffffff]
[ 0.180352] NET: Registered protocol family 23
[ 0.181419] hpet clockevent registered
[ 0.181426] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.181488] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.181657] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.183729] cfg80211: Calling CRDA to update world regulatory domain
[ 0.183818] Switched to clocksource hpet
[ 0.184010] pnp: PnP ACPI init
[ 0.184093] ACPI: bus type PNP registered
[ 0.184694] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.184820] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.184879] pnp 00:02: [dma 4]
[ 0.184949] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.185246] system 00:03: [io 0x0600-0x060f] has been reserved
[ 0.185307] system 00:03: [io 0x0700-0x070f] has been reserved
[ 0.185366] system 00:03: [io 0x0800-0x080f] has been reserved
[ 0.185427] system 00:03: [io 0x1000-0x107f] could not be reserved
[ 0.185487] system 00:03: [io 0x1180-0x11bf] has been reserved
[ 0.185554] system 00:03: [io 0x01c0-0x01cf] has been reserved
[ 0.185615] system 00:03: [io 0xfe00] has been reserved
[ 0.185674] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.185734] system 00:03: [io 0x0610-0x061f] has been reserved
[ 0.185794] system 00:03: [mem 0xfec10000-0xfec1ffff] has been reserved
[ 0.185856] system 00:03: [mem 0xff800000-0xffbfffff] has been reserved
[ 0.185922] system 00:03: [mem 0xfff00000-0xffffffff] could not be reserved
[ 0.185988] system 00:03: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.186054] system 00:03: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.186115] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.186242] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.187884] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.188406] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.191468] pnp 00:07: [dma 1]
[ 0.191916] pnp 00:07: Plug and Play ACPI device, IDs NSC6001 (active)
[ 0.194464] pnp: PnP ACPI: found 8 devices
[ 0.194518] ACPI: bus type PNP unregistered
[ 0.234904] pci 0000:02:06.0: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.234912] pci 0000:02:06.1: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.234920] pci 0000:00:1e.0: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 02] add_size 8000000
[ 0.234931] pci 0000:00:1f.0: BAR 7: [io 0x1000-0x107f] has bogus alignment
[ 0.234998] pci 0000:00:1e.0: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 8000000
[ 0.235008] pci 0000:00:1e.0: BAR 9: assigned [mem 0x80000000-0x87ffffff pref]
[ 0.235084] pci 0000:00:1f.1: BAR 5: assigned [mem 0x88000000-0x880003ff]
[ 0.235175] pci 0000:02:06.0: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.235179] pci 0000:02:06.0: res[10]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.235183] pci 0000:02:06.1: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.235187] pci 0000:02:06.1: res[10]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.235192] pci 0000:02:06.0: res[7]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.235195] pci 0000:02:06.0: res[8]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.235199] pci 0000:02:06.1: res[7]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.235203] pci 0000:02:06.1: res[8]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.235207] pci 0000:02:06.0: BAR 9: assigned [mem 0x80000000-0x83ffffff pref]
[ 0.235282] pci 0000:02:06.0: BAR 10: assigned [mem 0x8c000000-0x8fffffff]
[ 0.235341] pci 0000:02:06.1: BAR 9: assigned [mem 0x84000000-0x87ffffff pref]
[ 0.235416] pci 0000:02:06.1: BAR 10: assigned [mem 0x90000000-0x93ffffff]
[ 0.235475] pci 0000:02:06.0: BAR 7: assigned [io 0x3000-0x30ff]
[ 0.235532] pci 0000:02:06.0: BAR 8: assigned [io 0x3400-0x34ff]
[ 0.235590] pci 0000:02:06.1: BAR 7: assigned [io 0x3800-0x38ff]
[ 0.235647] pci 0000:02:06.1: BAR 8: assigned [io 0x3c00-0x3cff]
[ 0.235744] pci 0000:02:06.0: CardBus bridge to [bus 03-06]
[ 0.235800] pci 0000:02:06.0: bridge window [io 0x3000-0x30ff]
[ 0.235859] pci 0000:02:06.0: bridge window [io 0x3400-0x34ff]
[ 0.235918] pci 0000:02:06.0: bridge window [mem 0x80000000-0x83ffffff pref]
[ 0.235993] pci 0000:02:06.0: bridge window [mem 0x8c000000-0x8fffffff]
[ 0.236054] pci 0000:02:06.1: CardBus bridge to [bus 07-0a]
[ 0.236109] pci 0000:02:06.1: bridge window [io 0x3800-0x38ff]
[ 0.236169] pci 0000:02:06.1: bridge window [io 0x3c00-0x3cff]
[ 0.236228] pci 0000:02:06.1: bridge window [mem 0x84000000-0x87ffffff pref]
[ 0.236303] pci 0000:02:06.1: bridge window [mem 0x90000000-0x93ffffff]
[ 0.236363] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.236418] pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff]
[ 0.236478] pci 0000:00:1e.0: bridge window [mem 0xe0200000-0xe07fffff]
[ 0.236539] pci 0000:00:1e.0: bridge window [mem 0x80000000-0x87ffffff pref]
[ 0.236618] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.236622] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.236626] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.236629] pci_bus 0000:02: resource 1 [mem 0xe0200000-0xe07fffff]
[ 0.236633] pci_bus 0000:02: resource 2 [mem 0x80000000-0x87ffffff pref]
[ 0.236636] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.236640] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[ 0.236644] pci_bus 0000:03: resource 0 [io 0x3000-0x30ff]
[ 0.236647] pci_bus 0000:03: resource 1 [io 0x3400-0x34ff]
[ 0.236651] pci_bus 0000:03: resource 2 [mem 0x80000000-0x83ffffff pref]
[ 0.236654] pci_bus 0000:03: resource 3 [mem 0x8c000000-0x8fffffff]
[ 0.236658] pci_bus 0000:07: resource 0 [io 0x3800-0x38ff]
[ 0.236661] pci_bus 0000:07: resource 1 [io 0x3c00-0x3cff]
[ 0.236665] pci_bus 0000:07: resource 2 [mem 0x84000000-0x87ffffff pref]
[ 0.236668] pci_bus 0000:07: resource 3 [mem 0x90000000-0x93ffffff]
[ 0.236794] NET: Registered protocol family 2
[ 0.237185] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.237278] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.237371] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.237497] TCP: reno registered
[ 0.237550] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.237617] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.237803] NET: Registered protocol family 1
[ 0.238165] RPC: Registered named UNIX socket transport module.
[ 0.238223] RPC: Registered udp transport module.
[ 0.238276] RPC: Registered tcp transport module.
[ 0.238329] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.238406] pci 0000:00:02.0: Boot video device
[ 0.240148] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.240206] PCI: setting IRQ 11 as level-triggered
[ 0.242626] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 0.242681] PCI: setting IRQ 10 as level-triggered
[ 0.245086] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 0.247537] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
[ 0.248454] PCI: CLS 32 bytes, default 64
[ 0.248702] Unpacking initramfs...
[ 0.393174] Freeing initrd memory: 3616K (f7476000 - f77fe000)
[ 0.393569] Simple Boot Flag at 0x37 set to 0x1
[ 0.394204] microcode: CPU0 sig=0x695, pf=0x20, revision=0x5
[ 0.394360] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 0.394436] Scanning for low memory corruption every 60 seconds
[ 0.394819] cryptomgr_test (19) used greatest stack depth: 7628 bytes left
[ 0.396695] bounce pool size: 64 pages
[ 0.405730] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.406608] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[ 0.408465] msgmni has been set to 1721
[ 0.409567] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.409641] io scheduler noop registered
[ 0.409842] io scheduler cfq registered (default)
[ 0.410241] intel_idle: does not run on family 6 model 9
[ 0.411555] ACPI: AC Adapter [ACAD] (on-line)
[ 0.412816] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.413262] ACPI: Lid Switch [LID]
[ 0.413467] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.413548] ACPI: Sleep Button [SLPB]
[ 0.413750] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.413827] ACPI: Power Button [PWRF]
[ 0.414160] ACPI: Fan [FAN0] (off)
[ 0.414424] ACPI: Fan [FAN1] (off)
[ 0.414963] ACPI: Video Device [AGP] (multi-head: yes rom: yes post: no)
[ 0.415462] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input3
[ 0.415629] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.415695] ACPI: acpi_idle registered with cpuidle
[ 0.419237] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.419294] ACPI: Thermal Zone [THRM] (53 C)
[ 0.419475] GHES: HEST is not enabled!
[ 0.419565] isapnp: Scanning for PnP cards...
[ 0.513400] ACPI: Battery Slot [BAT1] (battery absent)
[ 0.557618] ACPI: Battery Slot [BAT2] (battery absent)
[ 0.777005] isapnp: No Plug & Play device found
[ 0.777389] Non-volatile memory driver v1.3
[ 0.777442] Linux agpgart interface v0.103
[ 0.777531] agpgart-intel 0000:00:00.0: Intel 855GM Chipset
[ 0.777611] agpgart-intel 0000:00:00.0: detected gtt size: 131072K total, 131072K mappable
[ 0.778267] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 0.778540] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
[ 0.778702] [drm] Initialized drm 1.1.0 20060810
[ 0.780350] [drm:i915_dump_device_info], i915 device info: gen=2, pciid=0x3582 flags=is_mobile,is_i85x,cursor_needs_physical,has_overlay,overlay_needs_physical,
[ 0.780428] [drm:intel_detect_pch],
[ 0.780431] No PCH found?
[ 0.780480] [drm] Memory usable by graphics device = 128M
[ 0.780535] [drm:i915_gem_gtt_init], GMADR size = 128M
[ 0.780538] [drm:i915_gem_gtt_init], GTT stolen size = 32M
[ 0.781600] [drm:intel_opregion_setup], graphic opregion physical addr: 0x0
[ 0.781608] [drm:intel_opregion_setup], ACPI OpRegion not supported!
[ 0.781732] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.781794] [drm] Driver supports precise vblank timestamp query.
[ 0.781851] [drm:init_vbt_defaults], Set default to SSC at 66MHz
[ 0.781892] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 48 display_clock_mode 0 fdi_rx_polarity_inverted 0
[ 0.781897] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
[ 0.781907] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[ 0.781910] [drm:drm_mode_debug_printmodeline], Modeline 0:"1400x1050" 0 108000 1400 1416 1528 1688 1050 1051 1054 1066 0x8 0xa
[ 0.781917] [drm:parse_lfp_panel_data], VBT initial LVDS value 4000033c
[ 0.781920] [drm:parse_sdvo_device_mapping], different child size is found. Invalid.
[ 0.781922] [drm:parse_device_mapping], different child size is found. Invalid.
[ 0.781925] [drm:parse_mipi], No MIPI BDB found
[ 0.781943] [drm:intel_dsm_pci_probe],
[ 0.781945] no _DSM method for intel device
[ 0.782036] [drm:intel_modeset_init], 2 display pipes available.
[ 0.782052] [drm:intel_modeset_init], pipe A sprite A init failed: -19
[ 0.782067] [drm:intel_modeset_init], pipe B sprite B init failed: -19
[ 0.782070] [drm:intel_shared_dpll_init], 0 shared PLLs initialized
[ 0.782078] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.870218] [drm] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3
[ 0.898054] [drm:intel_lvds_init], using preferred mode from EDID:
[ 0.898057] [drm:drm_mode_debug_printmodeline],
[ 0.898061] Modeline 8:"1400x1050" 62 108000 1400 1448 1560 1640 1050 1051 1054 1065 0x48 0xa
[ 0.898134] [drm:intel_lvds_init], detected dual-link lvds configuration
[ 0.898238] [drm:intel_panel_get_backlight], get backlight PWM = 0
[ 0.898242] [drm:intel_panel_get_max_backlight], max backlight PWM = 0
[ 0.898244] [drm:intel_panel_setup_backlight], Failed to get maximum backlight value
[ 0.898357] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1
[ 0.898639] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 0
[ 0.898642] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1
[ 0.900522] [drm:ch7xxx_init], Detected CH7009A chipset, vendor/device ID 0x84/0x17
[ 0.900525] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 0
[ 0.900638] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7fff000]
[ 0.902739] [drm:i915_gem_context_init], Disabling HW Contexts; old hardware
[ 0.902897] [drm] initialized overlay support
[ 0.902961] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled
[ 0.902969] [drm:intel_modeset_readout_hw_state], [CRTC:4] hw state readout: enabled
[ 0.902974] [drm:intel_modeset_readout_hw_state], [ENCODER:6:LVDS-6] hw state readout: enabled, pipe B
[ 0.902979] [drm:intel_modeset_readout_hw_state], [ENCODER:12:DAC-12] hw state readout: disabled, pipe A
[ 0.902983] [drm:intel_modeset_readout_hw_state], [ENCODER:13:None-13] hw state readout: disabled, pipe A
[ 0.902987] [drm:intel_modeset_readout_hw_state], [CONNECTOR:5:LVDS-1] hw state readout: enabled
[ 0.902991] [drm:intel_modeset_readout_hw_state], [CONNECTOR:11:VGA-1] hw state readout: disabled
[ 0.960220] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[ 0.961233] [drm:intel_modeset_readout_hw_state], [CONNECTOR:14:DVI-I-1] hw state readout: disabled
[ 0.966251] [drm:i85x_get_fifo_size], FIFO size - (0x00015455) A: 42
[ 0.966254] [drm:i85x_get_fifo_size], FIFO size - (0x00015455) B: 42
[ 0.966257] [drm:i9xx_update_wm], FIFO watermarks - A: 40, B: 40
[ 0.966260] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 40, B: 40, C: 2, SR 1
[ 0.966263] [drm:intel_sanitize_crtc], [CRTC:3] hw state adjusted, was enabled, now disabled
[ 0.966267] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
[ 0.966270] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 0.966272] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 0.966274] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 0.966278] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 0.966281] [drm:intel_dump_pipe_config], requested mode:
[ 0.966284] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 640 0 0 0 480 0 0 0 0x0 0x0
[ 0.966288] [drm:intel_dump_pipe_config], adjusted mode:
[ 0.966290] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 0.966294] [drm:intel_dump_crtc_timings], crtc timings: 0 640 656 752 800 480 490 492 525, type: 0x0 flags: 0x0
[ 0.966298] [drm:intel_dump_pipe_config], port clock: 25154
[ 0.966301] [drm:intel_dump_pipe_config], pipe src size: 640x480
[ 0.966303] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 0.966306] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 0.966309] [drm:intel_dump_pipe_config], ips: 0
[ 0.966311] [drm:intel_dump_pipe_config], double wide: 0
[ 0.966314] [drm:intel_dump_pipe_config], [CRTC:4][setup_hw_state] config for pipe B
[ 0.966317] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 0.966319] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 0.966321] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 0.966325] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 0.966328] [drm:intel_dump_pipe_config], requested mode:
[ 0.966330] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1400 0 0 0 1050 0 0 0 0x0 0x0
[ 0.966334] [drm:intel_dump_pipe_config], adjusted mode:
[ 0.966336] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x5
[ 0.966340] [drm:intel_dump_crtc_timings], crtc timings: 54000 1400 1416 1528 1688 1050 1051 1054 1066, type: 0x0 flags: 0x5
[ 0.966344] [drm:intel_dump_pipe_config], port clock: 54000
[ 0.966346] [drm:intel_dump_pipe_config], pipe src size: 1400x1050
[ 0.966349] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
[ 0.966352] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 0.966354] [drm:intel_dump_pipe_config], ips: 0
[ 0.966356] [drm:intel_dump_pipe_config], double wide: 0
[ 0.966360] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 0.967300] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[ 0.967303] [drm:check_encoder_state], [ENCODER:12:DAC-12]
[ 0.967306] [drm:check_encoder_state], [ENCODER:13:None-13]
[ 0.967309] [drm:check_crtc_state], [CRTC:3]
[ 0.967312] [drm:check_crtc_state], [CRTC:4]
[ 0.967340] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 0.967343] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1]
[ 0.967364] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 0.967367] [drm:drm_mode_debug_printmodeline], Modeline 8:"1400x1050" 62 108000 1400 1448 1560 1640 1050 1051 1054 1065 0x48 0xa
[ 0.967373] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 0.967375] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
[ 1.020221] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[ 1.020564] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 1.020567] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 1.020571] [drm:intel_get_load_detect_pipe], [CONNECTOR:11:VGA-1], [ENCODER:12:DAC-12]
[ 1.020574] [drm:intel_get_load_detect_pipe], creating tmp fb for load-detection
[ 1.020598] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[ 1.020618] [drm:connected_sink_compute_bpp], [CONNECTOR:11:VGA-1] checking for sink bpp constrains
[ 1.020622] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[ 1.020625] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
[ 1.020628] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 1.020630] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 1.020632] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.020636] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.020639] [drm:intel_dump_pipe_config], requested mode:
[ 1.020641] [drm:drm_mode_debug_printmodeline], Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa
[ 1.020646] [drm:intel_dump_pipe_config], adjusted mode:
[ 1.020648] [drm:drm_mode_debug_printmodeline], Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa
[ 1.020652] [drm:intel_dump_crtc_timings], crtc timings: 31500 640 664 704 832 480 489 491 520, type: 0x10 flags: 0xa
[ 1.020656] [drm:intel_dump_pipe_config], port clock: 31500
[ 1.020658] [drm:intel_dump_pipe_config], pipe src size: 640x480
[ 1.020661] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1.020664] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.020666] [drm:intel_dump_pipe_config], ips: 0
[ 1.020668] [drm:intel_dump_pipe_config], double wide: 0
[ 1.026185] [drm:i9xx_update_plane], Writing base 00020000 00000000 0 0 2560
[ 1.026198] [drm:intel_crtc_mode_set], [ENCODER:12:DAC-12] set [MODE:0:640x480]
[ 1.026908] [drm:i85x_get_fifo_size], FIFO size - (0x00015455) A: 42
[ 1.026912] [drm:intel_calculate_wm], FIFO entries required for mode: 20
[ 1.026914] [drm:intel_calculate_wm], FIFO watermark level: 20
[ 1.026916] [drm:i85x_get_fifo_size], FIFO size - (0x00015455) B: 42
[ 1.026919] [drm:i9xx_update_wm], FIFO watermarks - A: 20, B: 40
[ 1.026922] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 20, B: 40, C: 2, SR 1
[ 1.060240] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 1.060245] [drm:intel_connector_check_state], [CONNECTOR:11:VGA-1]
[ 1.061190] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[ 1.061193] [drm:check_encoder_state], [ENCODER:12:DAC-12]
[ 1.061196] [drm:check_encoder_state], [ENCODER:13:None-13]
[ 1.061199] [drm:check_crtc_state], [CRTC:3]
[ 1.061209] [drm:check_crtc_state], [CRTC:4]
[ 1.080494] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 1.080498] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 1.080501] [drm:intel_crt_load_detect], starting load-detect on CRT
[ 1.082037] [drm:intel_release_load_detect_pipe], [CONNECTOR:11:VGA-1], [ENCODER:12:DAC-12]
[ 1.082045] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 1
[ 1.105229] [drm:i85x_get_fifo_size], FIFO size - (0x00015455) A: 42
[ 1.105233] [drm:i85x_get_fifo_size], FIFO size - (0x00015455) B: 42
[ 1.105235] [drm:i9xx_update_wm], FIFO watermarks - A: 40, B: 40
[ 1.105238] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 40, B: 40, C: 2, SR 1
[ 1.105245] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 1.106185] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[ 1.106188] [drm:check_encoder_state], [ENCODER:12:DAC-12]
[ 1.106191] [drm:check_encoder_state], [ENCODER:13:None-13]
[ 1.106194] [drm:check_crtc_state], [CRTC:3]
[ 1.106196] [drm:check_crtc_state], [CRTC:4]
[ 1.106257] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 1.106263] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-I-1]
[ 1.106266] [drm:intel_dvo_detect], [CONNECTOR:14:DVI-I-1]
[ 1.109524] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-I-1] disconnected
[ 1.109527] [drm:drm_setup_crtcs],
[ 1.109537] [drm:drm_enable_connectors], connector 5 enabled? yes
[ 1.109540] [drm:drm_enable_connectors], connector 11 enabled? no
[ 1.109542] [drm:drm_enable_connectors], connector 14 enabled? no
[ 1.109545] [drm:drm_target_preferred], looking for cmdline mode on connector 5
[ 1.109548] [drm:drm_target_preferred], looking for preferred mode on connector 5
[ 1.109551] [drm:drm_target_preferred], found mode 1400x1050
[ 1.109553] [drm:drm_setup_crtcs], picking CRTCs for 2048x2048 config
[ 1.109560] [drm:drm_setup_crtcs], desired mode 1400x1050 set on crtc 4
[ 1.121753] [drm:intelfb_create], allocated 1400x1050 fb: 0x00020000, bo f5ea3100
[ 1.121973] fbcon: inteldrmfb (fb0) is primary device
[ 1.122801] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
[ 1.122808] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 1.122812] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 1.122820] [drm:intel_crtc_set_config], [CRTC:4] [FB:16] #connectors=1 (x y) (0 0)
[ 1.122825] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
[ 1.122827] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[ 1.122832] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.122836] [drm:drm_mode_debug_printmodeline], Modeline 15:"1400x1050" 62 108000 1400 1448 1560 1640 1050 1051 1054 1065 0x48 0xa
[ 1.122838] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=1, fb_changed=0
[ 1.122840] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 1.122845] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[ 1.122851] [drm:connected_sink_compute_bpp], [CONNECTOR:5:LVDS-1] checking for sink bpp constrains
[ 1.122855] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18)
[ 1.122860] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
[ 1.122862] [drm:intel_dump_pipe_config], [CRTC:4][modeset] config for pipe B
[ 1.122864] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 1.122865] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
[ 1.122868] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.122871] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.122872] [drm:intel_dump_pipe_config], requested mode:
[ 1.122876] [drm:drm_mode_debug_printmodeline], Modeline 0:"1400x1050" 62 108000 1400 1448 1560 1640 1050 1051 1054 1065 0x48 0xa
[ 1.122878] [drm:intel_dump_pipe_config], adjusted mode:
[ 1.122881] [drm:drm_mode_debug_printmodeline], Modeline 0:"1400x1050" 62 108000 1400 1448 1560 1640 1050 1051 1054 1065 0x48 0xa
[ 1.122885] [drm:intel_dump_crtc_timings], crtc timings: 108000 1400 1448 1560 1640 1050 1051 1054 1065, type: 0x48 flags: 0xa
[ 1.122886] [drm:intel_dump_pipe_config], port clock: 108000
[ 1.122888] [drm:intel_dump_pipe_config], pipe src size: 1400x1050
[ 1.122890] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
[ 1.122893] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.122894] [drm:intel_dump_pipe_config], ips: 0
[ 1.122895] [drm:intel_dump_pipe_config], double wide: 0
[ 1.122899] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[ 1.385234] [drm:i9xx_pfit_disable], disabling pfit, current: 0x00000668
[ 1.385238] [drm:i85x_get_fifo_size], FIFO size - (0x00015455) A: 42
[ 1.385241] [drm:i85x_get_fifo_size], FIFO size - (0x00015455) B: 42
[ 1.385243] [drm:i9xx_update_wm], FIFO watermarks - A: 40, B: 40
[ 1.385245] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 40, B: 40, C: 2, SR 1
[ 1.385917] [drm:i9xx_update_plane], Writing base 00020000 00000000 0 0 5632
[ 1.385921] [drm:intel_crtc_mode_set], [ENCODER:6:LVDS-6] set [MODE:0:1400x1050]
[ 1.386564] [drm:i85x_get_fifo_size], FIFO size - (0x00015455) A: 42
[ 1.386566] [drm:i85x_get_fifo_size], FIFO size - (0x00015455) B: 42
[ 1.386568] [drm:intel_calculate_wm], FIFO entries required for mode: 68
[ 1.386569] [drm:intel_calculate_wm], FIFO watermark level: -28
[ 1.386571] [drm:i9xx_update_wm], FIFO watermarks - A: 40, B: 1
[ 1.386573] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 40, B: 1, C: 2, SR 1
[ 1.620222] [drm:intel_panel_enable_backlight], pipe B
[ 1.620225] [drm:intel_panel_get_max_backlight], max backlight PWM = 0
[ 1.620226] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[ 1.620235] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 1.621180] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[ 1.621183] [drm:check_encoder_state], [ENCODER:12:DAC-12]
[ 1.621185] [drm:check_encoder_state], [ENCODER:13:None-13]
[ 1.621187] [drm:check_crtc_state], [CRTC:3]
[ 1.621189] [drm:check_crtc_state], [CRTC:4]
[ 1.621199] [drm:intel_pipe_config_compare] *ERROR* mismatch in adjusted_mode.crtc_clock (expected 108000, found 48000)
[ 1.621200] ------------[ cut here ]------------
[ 1.621212] WARNING: CPU: 0 PID: 1 at /home/Projects/Linux-git/drivers/gpu/drm/i915/intel_display.c:9284 check_crtc_state+0x6eb/0xe60()
[ 1.621213] pipe state doesn't match!
[ 1.621214] Modules linked in:
[ 1.621219] CPU: 0 PID: 1 Comm: swapper Not tainted 3.13.0-rc2-00035-gda75339 #2
[ 1.621220] Hardware name: Acer TravelMate 660/TravelMate 660, BIOS 3A19 01/14/2004
[ 1.621226] f5c63690 f5c63690 f5c63650 c1649116 f5c63680 c103d2a4 c18b4c5c f5c636ac
[ 1.621230] 00000001 c18838d4 00002444 c132150b c132150b f5c14040 f5d799e8 f5c14680
[ 1.621234] f5c63698 c103d33e 00000009 f5c63690 c18b4c5c f5c636ac f5c63904 c132150b
[ 1.621235] Call Trace:
[ 1.621243] [<c1649116>] dump_stack+0x16/0x18
[ 1.621248] [<c103d2a4>] warn_slowpath_common+0x74/0x90
[ 1.621252] [<c132150b>] ? check_crtc_state+0x6eb/0xe60
[ 1.621255] [<c132150b>] ? check_crtc_state+0x6eb/0xe60
[ 1.621258] [<c103d33e>] warn_slowpath_fmt+0x2e/0x30
[ 1.621261] [<c132150b>] check_crtc_state+0x6eb/0xe60
[ 1.621269] [<c132e0ab>] intel_modeset_check_state+0x28b/0x7a0
[ 1.621272] [<c132e5ef>] intel_set_mode+0x2f/0x40
[ 1.621275] [<c132edae>] intel_crtc_set_config+0x7ae/0x9b0
[ 1.621279] [<c12ea953>] drm_mode_set_config_internal+0x43/0xc0
[ 1.621283] [<c12db7b5>] drm_fb_helper_set_par+0x45/0xc0
[ 1.621288] [<c12653d8>] fbcon_init+0x4a8/0x4f0
[ 1.621293] [<c12c7d48>] visual_init+0x98/0x100
[ 1.621296] [<c12ca058>] do_bind_con_driver+0x118/0x2d0
[ 1.621300] [<c1127ada>] ? sysfs_create_file_ns+0x2a/0x30
[ 1.621303] [<c12ca325>] do_take_over_console+0x115/0x1d0
[ 1.621306] [<c126390d>] do_fbcon_takeover+0x5d/0xc0
[ 1.621308] [<c12671fb>] fbcon_event_notify+0x69b/0x7a0
[ 1.621314] [<c1058c50>] notifier_call_chain+0x40/0x60
[ 1.621318] [<c1058ead>] __blocking_notifier_call_chain+0x3d/0x70
[ 1.621321] [<c1058efa>] blocking_notifier_call_chain+0x1a/0x20
[ 1.621326] [<c1258c91>] fb_notifier_call_chain+0x11/0x20
[ 1.621329] [<c125ac27>] register_framebuffer+0x1a7/0x2d0
[ 1.621332] [<c12db4fa>] drm_fb_helper_initial_config+0x2fa/0x4a0
[ 1.621336] [<c10c8e9e>] ? kmem_cache_alloc+0xae/0x120
[ 1.621341] [<c1365be9>] intel_fbdev_initial_config+0x19/0x20
[ 1.621344] [<c12fa69c>] i915_driver_load+0xdbc/0xe10
[ 1.621347] [<c12f7a90>] ? i915_dma_init+0x2f0/0x2f0
[ 1.621353] [<c12e49b7>] drm_dev_register+0x87/0x1a0
[ 1.621356] [<c12e6613>] drm_get_pci_dev+0x83/0x130
[ 1.621359] [<c112924b>] ? sysfs_do_create_link_sd.isra.5+0x9b/0x1b0
[ 1.621362] [<c12f6d05>] i915_pci_probe+0x35/0x90
[ 1.621366] [<c124d729>] pci_device_probe+0x79/0xd0
[ 1.621368] [<c1129380>] ? sysfs_create_link+0x20/0x40
[ 1.621373] [<c136b096>] driver_probe_device+0x56/0x1f0
[ 1.621375] [<c124d66e>] ? pci_match_device+0x9e/0xb0
[ 1.621378] [<c136b2b9>] __driver_attach+0x89/0x90
[ 1.621381] [<c136b230>] ? driver_probe_device+0x1f0/0x1f0
[ 1.621384] [<c1369a92>] bus_for_each_dev+0x42/0x80
[ 1.621387] [<c136ac79>] driver_attach+0x19/0x20
[ 1.621390] [<c136b230>] ? driver_probe_device+0x1f0/0x1f0
[ 1.621392] [<c136a911>] bus_add_driver+0xd1/0x1d0
[ 1.621395] [<c136b854>] driver_register+0x54/0xe0
[ 1.621398] [<c124cc48>] __pci_register_driver+0x28/0x30
[ 1.621401] [<c12e67ca>] drm_pci_init+0x10a/0x120
[ 1.621407] [<c1995bcc>] ? drm_core_init+0x107/0x107
[ 1.621410] [<c1995c2a>] i915_init+0x5e/0x60
[ 1.621413] [<c1000452>] do_one_initcall+0xd2/0x120
[ 1.621415] [<c105342f>] ? parameq+0xf/0x60
[ 1.621418] [<c105359e>] ? parse_args+0x11e/0x350
[ 1.621423] [<c1974afd>] kernel_init_freeable+0xd9/0x17d
[ 1.621425] [<c19744f3>] ? do_early_param+0x7a/0x7a
[ 1.621428] [<c16441cb>] kernel_init+0xb/0x100
[ 1.621432] [<c105c4d2>] ? schedule_tail+0x12/0x40
[ 1.621437] [<c164ef37>] ret_from_kernel_thread+0x1b/0x28
[ 1.621440] [<c16441c0>] ? rest_init+0x70/0x70
[ 1.621451] ---[ end trace b2e4d80ec333e232 ]---
[ 1.621453] [drm:intel_dump_pipe_config], [CRTC:4][hw state] config for pipe B
[ 1.621455] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 1.621456] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 1.621459] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.621462] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.621463] [drm:intel_dump_pipe_config], requested mode:
[ 1.621467] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1400 0 0 0 1050 0 0 0 0x0 0x0
[ 1.621468] [drm:intel_dump_pipe_config], adjusted mode:
[ 1.621471] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
[ 1.621475] [drm:intel_dump_crtc_timings], crtc timings: 48000 1400 1448 1560 1640 1050 1051 1054 1065, type: 0x0 flags: 0xa
[ 1.621476] [drm:intel_dump_pipe_config], port clock: 48000
[ 1.621478] [drm:intel_dump_pipe_config], pipe src size: 1400x1050
[ 1.621480] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
[ 1.621482] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.621484] [drm:intel_dump_pipe_config], ips: 0
[ 1.621485] [drm:intel_dump_pipe_config], double wide: 0
[ 1.621487] [drm:intel_dump_pipe_config], [CRTC:4][sw state] config for pipe B
[ 1.621488] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 1.621490] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
[ 1.621493] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.621496] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.621497] [drm:intel_dump_pipe_config], requested mode:
[ 1.621501] [drm:drm_mode_debug_printmodeline], Modeline 0:"1400x1050" 62 108000 1400 1448 1560 1640 1050 1051 1054 1065 0x48 0xa
[ 1.621502] [drm:intel_dump_pipe_config], adjusted mode:
[ 1.621506] [drm:drm_mode_debug_printmodeline], Modeline 0:"1400x1050" 62 108000 1400 1448 1560 1640 1050 1051 1054 1065 0x48 0xa
[ 1.621509] [drm:intel_dump_crtc_timings], crtc timings: 108000 1400 1448 1560 1640 1050 1051 1054 1065, type: 0x48 flags: 0xa
[ 1.621511] [drm:intel_dump_pipe_config], port clock: 108000
[ 1.621512] [drm:intel_dump_pipe_config], pipe src size: 1400x1050
[ 1.621514] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
[ 1.621516] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.621518] [drm:intel_dump_pipe_config], ips: 0
[ 1.621519] [drm:intel_dump_pipe_config], double wide: 0
[ 1.621569] [drm:intel_crtc_set_config], [CRTC:4] [FB:16] #connectors=1 (x y) (0 0)
[ 1.621575] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 1.621577] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 1.630222] [drm:intel_crtc_set_config], [CRTC:4] [FB:16] #connectors=1 (x y) (0 0)
[ 1.630228] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 1.630230] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 1.638805] Console: switching to colour frame buffer device 175x65
[ 1.638811] [drm:intel_crtc_set_config], [CRTC:4] [FB:16] #connectors=1 (x y) (0 0)
[ 1.638817] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 1.638819] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 1.733091] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.735114] i915 0000:00:02.0: registered panic notifier
[ 1.737148] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.741340] loop: module loaded
[ 1.743535] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \_SB_.PCI0.LPC0.PMIO 1 (20131115/utaddress-251)
[ 1.745756] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.748016] ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \_SB_.PCI0.LPC0.GPOX 1 (20131115/utaddress-251)
[ 1.750348] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.752713] ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \_SB_.PCI0.LPC0.GPOX 1 (20131115/utaddress-251)
[ 1.755155] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.757632] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.760545] ata_piix 0000:00:1f.1: version 2.13
[ 1.760582] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.769783] scsi0 : ata_piix
[ 1.772671] scsi1 : ata_piix
[ 1.775311] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 1.777841] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 1.780948] tun: Universal TUN/TAP device driver, 1.6
[ 1.783464] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 1.820241] ssb: Found chip with id 0x4401, rev 0x01 and package 0x00
[ 1.822805] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x04, vendor 0x4243)
[ 1.822811] ssb: Core 1 found: V90 (cc 0x807, rev 0x01, vendor 0x4243)
[ 1.822817] ssb: Core 2 found: PCI (cc 0x804, rev 0x02, vendor 0x4243)
[ 1.900352] ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0
[ 1.902984] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
[ 1.941121] b44 ssb0:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver xx:xx:xx:xx:xx:xx
[ 1.943872] nsc-ircc, chip->init
[ 1.946490] nsc-ircc, Found chip at base=0x04e
[ 1.949129] nsc-ircc, driver loaded (Dag Brattli)
[ 1.951777] ata2.01: NODEV after polling detection
[ 1.952189] IrDA: Registered device irda0
[ 1.954840] nsc-ircc, Found dongle: HP HSDL-1100/HSDL-2100
[ 1.957536] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
[ 1.960180] ipw2100: Copyright(c) 2003-2006 Intel Corporation
[ 1.963362] ata1.00: ATA-6: FUJITSU MHT2060AH, 006C, max UDMA/100
[ 1.966027] ata1.00: 117210240 sectors, multi 16: LBA
[ 1.970605] ata2.00: ATAPI: UJDA740 DVD/CDRW, 1.20, max UDMA/33
[ 1.973622] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
[ 1.977177] ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
[ 2.030898] ata1.00: configured for UDMA/100
[ 2.033918] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2060A 006C PQ: 0 ANSI: 5
[ 2.037101] ata2.00: configured for UDMA/33
[ 2.040149] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.043066] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 2.046071] sd 0:0:0:0: [sda] Write Protect is off
[ 2.048881] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.049234] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.053903] scsi 1:0:0:0: CD-ROM MATSHITA UJDA740 DVD/CDRW 1.20 PQ: 0 ANSI: 5
[ 2.059643] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 2.062567] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.065825] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.066100] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.075215] sda: sda1 sda2 sda3 sda4
[ 2.079038] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.090243] eth%d: Radio is disabled by RF switch.
[ 2.210647] libipw: 802.11 data/management/control stack, git-1.1.13
[ 2.213637] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx>
[ 2.216780] usbcore: registered new interface driver asix
[ 2.221469] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 2.300256] firewire_ohci 0000:02:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 2.304151] yenta_cardbus 0000:02:06.0: CardBus bridge found [1025:0035]
[ 2.307339] yenta_cardbus 0000:02:06.0: O2: enabling read prefetch/write burst. If you experience problems or performance issues, use the yenta_socket parameter 'o2_speedup=off'
[ 2.450889] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x00b0, PCI irq 10
[ 2.454254] yenta_cardbus 0000:02:06.0: Socket status: 30000006
[ 2.457608] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
[ 2.461010] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [io 0x3000-0x3fff]
[ 2.464434] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff:
[ 2.469875] excluding 0x3000-0x30ff 0x3400-0x34ff 0x3800-0x38ff 0x3c00-0x3cff
[ 2.479110] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0xe0200000-0xe07fffff]
[ 2.482579] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0200000-0xe07fffff:
[ 2.486026] excluding 0xe0200000-0xe025ffff
[ 2.489534] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x87ffffff pref]
[ 2.492951] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x87ffffff:
[ 2.496460] excluding 0x80000000-0x87ffffff
[ 2.501136] yenta_cardbus 0000:02:06.1: CardBus bridge found [1025:0035]
[ 2.505684] modprobe (65) used greatest stack depth: 7048 bytes left
[ 2.640924] yenta_cardbus 0000:02:06.1: ISA IRQ mask 0x00b0, PCI irq 10
[ 2.644206] yenta_cardbus 0000:02:06.1: Socket status: 30000410
[ 2.647466] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #06 to #0a
[ 2.650817] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge window: [io 0x3000-0x3fff]
[ 2.654173] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3000-0x3fff:
[ 2.659554] excluding 0x3000-0x30ff 0x3400-0x34ff 0x3800-0x38ff 0x3c00-0x3cff
[ 2.668697] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge window: [mem 0xe0200000-0xe07fffff]
[ 2.672138] pcmcia_socket pcmcia_socket1: cs: memory probe 0xe0200000-0xe07fffff:
[ 2.675600] excluding 0xe0200000-0xe025ffff
[ 2.679157] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge window: [mem 0x80000000-0x87ffffff pref]
[ 2.682665] pcmcia_socket pcmcia_socket1: cs: memory probe 0x80000000-0x87ffffff:
[ 2.686295] excluding 0x80000000-0x87ffffff
[ 2.692214] aoe: AoE v85 initialised.
[ 2.695715] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.699225] ehci-pci: EHCI PCI platform driver
[ 2.703660] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 2.707176] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.710713] ehci-pci 0000:00:1d.7: debug port 1
[ 2.718114] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 2.718140] ehci-pci 0000:00:1d.7: irq 10, io mem 0xe0100000
[ 2.740235] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.743915] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.747394] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.750869] usb usb1: Product: EHCI Host Controller
[ 2.754318] usb usb1: Manufacturer: Linux 3.13.0-rc2-00035-gda75339 ehci_hcd
[ 2.757788] usb usb1: SerialNumber: 0000:00:1d.7
[ 2.761576] hub 1-0:1.0: USB hub found
[ 2.765010] hub 1-0:1.0: 6 ports detected
[ 2.768979] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.773264] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.776649] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.780067] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001820
[ 2.783594] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.786936] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.790272] usb usb2: Product: UHCI Host Controller
[ 2.793593] usb usb2: Manufacturer: Linux 3.13.0-rc2-00035-gda75339 uhci_hcd
[ 2.796940] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.800588] hub 2-0:1.0: USB hub found
[ 2.803942] hub 2-0:1.0: 2 ports detected
[ 2.808271] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.811714] firewire_core 0000:02:07.0: created device fw0: GUID 00c09f00000fc03c, S400
[ 2.815060] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.818414] uhci_hcd 0000:00:1d.1: irq 10, io base 0x00001840
[ 2.821852] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.825105] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.828292] usb usb3: Product: UHCI Host Controller
[ 2.831383] usb usb3: Manufacturer: Linux 3.13.0-rc2-00035-gda75339 uhci_hcd
[ 2.834480] usb usb3: SerialNumber: 0000:00:1d.1
[ 2.837851] hub 3-0:1.0: USB hub found
[ 2.840934] hub 3-0:1.0: 2 ports detected
[ 2.844952] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.847953] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.850976] uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001860
[ 2.854069] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.857009] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.859926] usb usb4: Product: UHCI Host Controller
[ 2.862803] usb usb4: Manufacturer: Linux 3.13.0-rc2-00035-gda75339 uhci_hcd
[ 2.865665] usb usb4: SerialNumber: 0000:00:1d.2
[ 2.868776] hub 4-0:1.0: USB hub found
[ 2.871688] hub 4-0:1.0: 2 ports detected
[ 2.874819] usbcore: registered new interface driver usb-storage
[ 2.877740] usbcore: registered new interface driver usbserial
[ 2.880548] usbcore: registered new interface driver ftdi_sio
[ 2.883301] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 2.886107] usbcore: registered new interface driver pl2303
[ 2.888827] usbserial: USB Serial support registered for pl2303
[ 2.891624] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12
[ 2.895914] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.898578] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.901653] mousedev: PS/2 mouse device common for all mice
[ 2.904945] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 2.907876] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 2.910463] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.913075] i2c /dev entries driver
[ 2.917231] IR NEC protocol handler initialized
[ 2.919795] IR RC5(x) protocol handler initialized
[ 2.922358] IR RC6 protocol handler initialized
[ 2.924906] IR JVC protocol handler initialized
[ 2.927416] IR Sony protocol handler initialized
[ 2.929933] IR RC5 (streamzap) protocol handler initialized
[ 2.932466] IR SANYO protocol handler initialized
[ 2.934988] IR MCE Keyboard/mouse protocol handler initialized
[ 2.937603] usbcore: registered new interface driver uvcvideo
[ 2.940134] USB Video Class driver (1.1.1)
[ 2.942786] usbcore: registered new interface driver Philips webcam
[ 2.945604] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.948751] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@xxxxxxxxxx
[ 2.952590] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.955766] usbcore: registered new interface driver usbhid
[ 2.958396] usbhid: USB HID core driver
[ 3.582359] psmouse serio1: synaptics: Touchpad model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006/0x0, board id: 3655, fw id: 753378
[ 3.610025] pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1
[ 3.612791] pcmcia_socket pcmcia_socket1: cs: memory probe 0xe0260000-0xe07fffff:
[ 3.624806] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 3.636411] clean.
[ 3.639769] pcmcia 1.0: pcmcia: registering new device pcmcia1.0 (IRQ: 4)
[ 3.830023] intel8x0_measure_ac97_clock: measured 59884 usecs (2885 samples)
[ 3.832841] intel8x0: clocking to 48000
[ 3.840831] usbcore: registered new interface driver snd-usb-audio
[ 3.843698] Netfilter messages via NETLINK v0.30.
[ 3.846525] nfnl_acct: registering with nfnetlink.
[ 3.849458] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.852322] TCP: cubic registered
[ 3.855690] NET: Registered protocol family 10
[ 3.859297] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.862134] sit: IPv6 over IPv4 tunneling driver
[ 3.865256] NET: Registered protocol family 17
[ 3.868401] 8021q: 802.1Q VLAN Support v1.8
[ 3.871163] lib80211: common routines for IEEE802.11 drivers
[ 3.873935] lib80211_crypt: registered algorithm 'NULL'
[ 3.873940] lib80211_crypt: registered algorithm 'WEP'
[ 3.873944] lib80211_crypt: registered algorithm 'CCMP'
[ 3.873948] lib80211_crypt: registered algorithm 'TKIP'
[ 3.874429] Using IPI Shortcut mode
[ 3.878595] console [netcon0] enabled
[ 3.881365] netconsole: network logging started
[ 3.884132] rtc_cmos 00:00: setting system clock to 2013-12-04 21:00:57 UTC (1386190857)
[ 3.887448] ALSA device list:
[ 3.890219] #0: Intel 82801DB-ICH4 with ALC202 at irq 10
[ 3.892994] #1: Intel 82801DB-ICH4 Modem at irq 10
[ 3.896131] Freeing unused kernel memory: 404K (c1974000 - c19d9000)
[ 3.898987] Write protecting the kernel text: 6468k
[ 3.901845] Write protecting the kernel read-only data: 2824k
[ 3.904726] usb 3-2: new low-speed USB device number 2 using uhci_hcd
[ 3.930851] exe (80) used greatest stack depth: 7004 bytes left
[ 4.027500] sh (89) used greatest stack depth: 6960 bytes left
[ 4.079793] exe (82) used greatest stack depth: 6956 bytes left
[ 4.099570] usb 3-2: New USB device found, idVendor=6253, idProduct=0100
[ 4.102536] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.105359] usb 3-2: Product: Remote Control
[ 4.108153] usb 3-2: Manufacturer: Twinhan Tech
[ 4.110917] usb 3-2: SerialNumber: 1111111
[ 4.115967] loadkeys (102) used greatest stack depth: 6888 bytes left
[ 4.156564] input: Twinhan Tech Remote Control as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input8
[ 4.164688] twinhan 0003:6253:0100.0001: input,hidraw0: USB HID v1.10 Keyboard [Twinhan Tech Remote Control] on usb-0000:00:1d.1-2/input0
[ 4.194793] input: Twinhan Tech Remote Control as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input9
[ 4.202854] twinhan 0003:6253:0100.0002: input,hidraw1: USB HID v1.10 Mouse [Twinhan Tech Remote Control] on usb-0000:00:1d.1-2/input1
[ 4.480092] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[ 4.523412] blkid (105) used greatest stack depth: 6192 bytes left
[ 4.671749] usb 4-2: New USB device found, idVendor=0451, idProduct=2036
[ 4.671932] usb 4-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.672108] usb 4-2: Product: General Purpose USB Hub
[ 4.679813] hub 4-2:1.0: USB hub found
[ 4.680728] hub 4-2:1.0: 3 ports detected
[ 4.961678] usb 4-2.3: new full-speed USB device number 3 using uhci_hcd
[ 5.051660] usb 4-2.3: device descriptor read/64, error -71
[ 5.251626] usb 4-2.3: device descriptor read/64, error -71
[ 5.441596] usb 4-2.3: new full-speed USB device number 4 using uhci_hcd
[ 5.531575] usb 4-2.3: device descriptor read/64, error -71
[ 5.731547] usb 4-2.3: device descriptor read/64, error -71
[ 5.921518] usb 4-2.3: new full-speed USB device number 5 using uhci_hcd
[ 6.340035] usb 4-2.3: device not accepting address 5, error -71
[ 6.421433] usb 4-2.3: new full-speed USB device number 6 using uhci_hcd
[ 6.840037] usb 4-2.3: device not accepting address 6, error -71
[ 6.841377] hub 4-2:1.0: unable to enumerate USB device on port 3
[ 10.525737] bio: create slab <bio-1> at 1
[ 10.723463] bio: create slab <bio-1> at 1
[ 10.726008] cryptsetup (108) used greatest stack depth: 6088 bytes left
[ 10.762461] random: partprobe urandom read with 98 bits of entropy available
[ 11.450786] UDF-fs: warning (device dm-2): udf_fill_super: No partition found (2)
[ 11.453939] XFS (dm-2): Mounting Filesystem
[ 11.760099] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=0
[ 11.760410] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 11.760417] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 11.860479] XFS (dm-2): Ending clean mount
[ 12.047691] random: nonblocking pool is initialized
[ 13.276000] [drm:intel_crtc_set_config], [CRTC:4] [FB:16] #connectors=1 (x y) (0 0)
[ 13.276019] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 13.276028] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 13.403696] init-early.sh (155) used greatest stack depth: 5928 bytes left
[ 16.658477] systemd-udevd[312]: starting version 204
[ 17.940339] systemd-udevd[329]: renamed network interface eth0 to lan
[ 17.983183] systemd-udevd[331]: renamed network interface eth1 to wlan
[ 18.375157] nsc-ircc 00:07: in use; can't configure
[ 18.375385] nsc-ircc 00:07: in use; can't configure
[ 20.579520] Adding 2097148k swap on /dev/mapper/cryptop1. Priority:-1 extents:1 across:2097148k
[ 20.711926] EXT2-fs (sda2): warning: mounting unchecked fs, running e2fsck is recommended
[ 20.754916] XFS (dm-3): Mounting Filesystem
[ 21.780043] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=0
[ 21.780425] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 21.780434] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 21.934594] XFS (dm-3): Ending clean mount
[ 22.465310] dmesg (660) used greatest stack depth: 5824 bytes left
[ 23.196807] [drm:intel_crtc_set_config], [CRTC:4] [FB:16] #connectors=1 (x y) (0 0)
[ 23.196822] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 23.196828] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 23.853690] ip (840) used greatest stack depth: 5444 bytes left
[ 26.676394] IPv6: ADDRCONF(NETDEV_UP): lan: link is not ready
[ 30.040195] b44 ssb0:0 lan: Link is up at 100 Mbps, full duplex
[ 30.040210] b44 ssb0:0 lan: Flow control is off for TX and off for RX
[ 30.040294] IPv6: ADDRCONF(NETDEV_CHANGE): lan: link becomes ready
[ 31.800094] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=0
[ 31.800406] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 31.800414] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 38.406051] ip (1516) used greatest stack depth: 5204 bytes left
[ 41.820043] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=0
[ 41.820354] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 41.820362] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 49.550511] [drm:i915_gem_open],
[ 49.550632] [drm:intel_crtc_cursor_set], cursor off
[ 49.550639] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
[ 49.550650] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 49.550661] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 49.550671] [drm:intel_crtc_cursor_set], cursor off
[ 49.550676] [drm:intel_crtc_set_config], [CRTC:4] [FB:16] #connectors=1 (x y) (0 0)
[ 49.550687] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 49.550694] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 50.358080] [drm:intel_crtc_set_config], [CRTC:4] [FB:16] #connectors=1 (x y) (0 0)
[ 50.358094] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 50.358101] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 50.374394] [drm:i915_gem_open],
[ 50.374436] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[ 50.399131] [drm:drm_mode_addfb], [FB:17]
[ 50.399346] [drm:drm_mode_addfb], [FB:17]
[ 50.401261] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[ 50.401276] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[ 50.401591] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 50.401602] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 50.401790] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 50.401797] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 50.401861] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[ 50.401866] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[ 50.401931] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 50.401937] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 50.401941] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1]
[ 50.401967] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 50.401971] [drm:drm_mode_debug_printmodeline], Modeline 8:"1400x1050" 62 108000 1400 1448 1560 1640 1050 1051 1054 1065 0x48 0xa
[ 50.401982] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 50.402773] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 50.402778] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 50.402782] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
[ 50.403066] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 50.403069] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 50.403073] [drm:intel_get_load_detect_pipe], [CONNECTOR:11:VGA-1], [ENCODER:12:DAC-12]
[ 50.403078] [drm:intel_get_load_detect_pipe], reusing fbdev for load-detection framebuffer
[ 50.403086] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[ 50.403097] [drm:connected_sink_compute_bpp], [CONNECTOR:11:VGA-1] checking for sink bpp constrains
[ 50.403101] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[ 50.403105] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
[ 50.403108] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 50.403111] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 50.403113] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 50.403117] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 50.403121] [drm:intel_dump_pipe_config], requested mode:
[ 50.403123] [drm:drm_mode_debug_printmodeline], Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa
[ 50.403128] [drm:intel_dump_pipe_config], adjusted mode:
[ 50.403131] [drm:drm_mode_debug_printmodeline], Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa
[ 50.403135] [drm:intel_dump_crtc_timings], crtc timings: 31500 640 664 704 832 480 489 491 520, type: 0x10 flags: 0xa
[ 50.403140] [drm:intel_dump_pipe_config], port clock: 31500
[ 50.403142] [drm:intel_dump_pipe_config], pipe src size: 640x480
[ 50.403145] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 50.403148] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 50.403151] [drm:intel_dump_pipe_config], ips: 0
[ 50.403154] [drm:intel_dump_pipe_config], double wide: 0
[ 50.407422] [drm:i9xx_update_plane], Writing base 00020000 00000000 0 0 5632
[ 50.407430] [drm:intel_crtc_mode_set], [ENCODER:12:DAC-12] set [MODE:0:640x480]
[ 50.408139] [drm:i85x_get_fifo_size], FIFO size - (0x00015455) A: 42
[ 50.408144] [drm:intel_calculate_wm], FIFO entries required for mode: 20
[ 50.408146] [drm:intel_calculate_wm], FIFO watermark level: 20
[ 50.408149] [drm:i85x_get_fifo_size], FIFO size - (0x00015455) B: 42
[ 50.408152] [drm:intel_calculate_wm], FIFO entries required for mode: 68
[ 50.408154] [drm:intel_calculate_wm], FIFO watermark level: -28
[ 50.408157] [drm:i9xx_update_wm], FIFO watermarks - A: 20, B: 1
[ 50.408160] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 20, B: 1, C: 2, SR 1
[ 50.440073] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 50.440087] [drm:intel_connector_check_state], [CONNECTOR:11:VGA-1]
[ 50.441044] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[ 50.441048] [drm:check_encoder_state], [ENCODER:12:DAC-12]
[ 50.441052] [drm:check_encoder_state], [ENCODER:13:None-13]
[ 50.441056] [drm:check_crtc_state], [CRTC:3]
[ 50.441071] [drm:check_crtc_state], [CRTC:4]
[ 50.441082] [drm:intel_pipe_config_compare] *ERROR* mismatch in adjusted_mode.crtc_clock (expected 108000, found 48000)
[ 50.441087] ------------[ cut here ]------------
[ 50.441105] WARNING: CPU: 0 PID: 2152 at /home/Projects/Linux-git/drivers/gpu/drm/i915/intel_display.c:9284 check_crtc_state+0x6eb/0xe60()
[ 50.441108] pipe state doesn't match!
[ 50.441110] Modules linked in:
[ 50.441118] CPU: 0 PID: 2152 Comm: Xorg Tainted: G W 3.13.0-rc2-00035-gda75339 #2
[ 50.441121] Hardware name: Acer TravelMate 660/TravelMate 660, BIOS 3A19 01/14/2004
[ 50.441125] f4ddd970 f4ddd970 f4ddd930 c1649116 f4ddd960 c103d2a4 c18b4c5c f4ddd98c
[ 50.441133] 00000868 c18838d4 00002444 c132150b c132150b f5c14040 f5d799e8 f5c14680
[ 50.441141] f4ddd978 c103d33e 00000009 f4ddd970 c18b4c5c f4ddd98c f4dddbe4 c132150b
[ 50.441149] Call Trace:
[ 50.441161] [<c1649116>] dump_stack+0x16/0x18
[ 50.441169] [<c103d2a4>] warn_slowpath_common+0x74/0x90
[ 50.441176] [<c132150b>] ? check_crtc_state+0x6eb/0xe60
[ 50.441181] [<c132150b>] ? check_crtc_state+0x6eb/0xe60
[ 50.441186] [<c103d33e>] warn_slowpath_fmt+0x2e/0x30
[ 50.441192] [<c132150b>] check_crtc_state+0x6eb/0xe60
[ 50.441203] [<c132e0ab>] intel_modeset_check_state+0x28b/0x7a0
[ 50.441209] [<c132e5ef>] intel_set_mode+0x2f/0x40
[ 50.441215] [<c132faf7>] intel_get_load_detect_pipe+0x247/0x3e0
[ 50.441224] [<c106cb65>] ? vprintk+0x35/0x40
[ 50.441233] [<c12e43ca>] ? drm_ut_debug_printk+0x2a/0x50
[ 50.441238] [<c1332ab1>] ? intel_crt_detect_ddc+0x71/0xc0
[ 50.441243] [<c1332f7f>] intel_crt_detect+0x47f/0x830
[ 50.441253] [<c12d84b0>] drm_helper_probe_single_connector_modes+0x2c0/0x360
[ 50.441261] [<c164d31c>] ? mutex_lock+0x1c/0x2a
[ 50.441268] [<c12ec5c8>] drm_mode_getconnector+0x338/0x3b0
[ 50.441274] [<c12ec290>] ? drm_mode_getcrtc+0xd0/0xd0
[ 50.441279] [<c12df362>] drm_ioctl+0x4f2/0x670
[ 50.441284] [<c12ec290>] ? drm_mode_getcrtc+0xd0/0xd0
[ 50.441293] [<c117f465>] ? xfs_file_aio_write+0xd5/0x100
[ 50.441298] [<c12dee70>] ? drm_free_buffer+0x30/0x30
[ 50.441304] [<c10e0b8b>] do_vfs_ioctl+0x6b/0x580
[ 50.441313] [<c10d0f77>] ? do_sync_write+0x77/0xa0
[ 50.441319] [<c10d1b5d>] ? vfs_write+0x15d/0x1b0
[ 50.441323] [<c10e10e0>] SyS_ioctl+0x40/0x70
[ 50.441330] [<c164efbe>] sysenter_do_call+0x12/0x26
[ 50.441335] ---[ end trace b2e4d80ec333e234 ]---
[ 50.441338] [drm:intel_dump_pipe_config], [CRTC:4][hw state] config for pipe B
[ 50.441342] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 50.441345] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 50.441348] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 50.441353] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 50.441357] [drm:intel_dump_pipe_config], requested mode:
[ 50.441360] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1400 0 0 0 1050 0 0 0 0x0 0x0
[ 50.441366] [drm:intel_dump_pipe_config], adjusted mode:
[ 50.441369] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
[ 50.441374] [drm:intel_dump_crtc_timings], crtc timings: 48000 1400 1448 1560 1640 1050 1051 1054 1065, type: 0x0 flags: 0xa
[ 50.441379] [drm:intel_dump_pipe_config], port clock: 48000
[ 50.441382] [drm:intel_dump_pipe_config], pipe src size: 1400x1050
[ 50.441385] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
[ 50.441389] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 50.441393] [drm:intel_dump_pipe_config], ips: 0
[ 50.441395] [drm:intel_dump_pipe_config], double wide: 0
[ 50.441398] [drm:intel_dump_pipe_config], [CRTC:4][sw state] config for pipe B
[ 50.441401] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 50.441404] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
[ 50.441407] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 50.441411] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 50.441415] [drm:intel_dump_pipe_config], requested mode:
[ 50.441418] [drm:drm_mode_debug_printmodeline], Modeline 0:"1400x1050" 62 108000 1400 1448 1560 1640 1050 1051 1054 1065 0x48 0xa
[ 50.441424] [drm:intel_dump_pipe_config], adjusted mode:
[ 50.441427] [drm:drm_mode_debug_printmodeline], Modeline 0:"1400x1050" 62 108000 1400 1448 1560 1640 1050 1051 1054 1065 0x48 0xa
[ 50.441432] [drm:intel_dump_crtc_timings], crtc timings: 108000 1400 1448 1560 1640 1050 1051 1054 1065, type: 0x48 flags: 0xa
[ 50.441438] [drm:intel_dump_pipe_config], port clock: 108000
[ 50.441440] [drm:intel_dump_pipe_config], pipe src size: 1400x1050
[ 50.441443] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
[ 50.441447] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 50.441451] [drm:intel_dump_pipe_config], ips: 0
[ 50.441453] [drm:intel_dump_pipe_config], double wide: 0
[ 50.460431] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 50.460444] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 50.460452] [drm:intel_crt_load_detect], starting load-detect on CRT
[ 50.463295] [drm:intel_release_load_detect_pipe], [CONNECTOR:11:VGA-1], [ENCODER:12:DAC-12]
[ 50.463313] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 1
[ 50.485052] [drm:i85x_get_fifo_size], FIFO size - (0x00015455) A: 42
[ 50.485066] [drm:i85x_get_fifo_size], FIFO size - (0x00015455) B: 42
[ 50.485074] [drm:intel_calculate_wm], FIFO entries required for mode: 68
[ 50.485080] [drm:intel_calculate_wm], FIFO watermark level: -28
[ 50.485086] [drm:i9xx_update_wm], FIFO watermarks - A: 40, B: 1
[ 50.485093] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 40, B: 1, C: 2, SR 1
[ 50.485114] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 50.486113] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[ 50.486121] [drm:check_encoder_state], [ENCODER:12:DAC-12]
[ 50.486129] [drm:check_encoder_state], [ENCODER:13:None-13]
[ 50.486136] [drm:check_crtc_state], [CRTC:3]
[ 50.486143] [drm:check_crtc_state], [CRTC:4]
[ 50.486162] [drm:intel_pipe_config_compare] *ERROR* mismatch in adjusted_mode.crtc_clock (expected 108000, found 48000)
[ 50.486170] ------------[ cut here ]------------
[ 50.486191] WARNING: CPU: 0 PID: 2152 at /home/Projects/Linux-git/drivers/gpu/drm/i915/intel_display.c:9284 check_crtc_state+0x6eb/0xe60()
[ 50.486197] pipe state doesn't match!
[ 50.486201] Modules linked in:
[ 50.486213] CPU: 0 PID: 2152 Comm: Xorg Tainted: G W 3.13.0-rc2-00035-gda75339 #2
[ 50.486220] Hardware name: Acer TravelMate 660/TravelMate 660, BIOS 3A19 01/14/2004
[ 50.486226] f4ddd9c0 f4ddd9c0 f4ddd980 c1649116 f4ddd9b0 c103d2a4 c18b4c5c f4ddd9dc
[ 50.486242] 00000868 c18838d4 00002444 c132150b c132150b f5c14040 f5d799e8 f5c14680
[ 50.486257] f4ddd9c8 c103d33e 00000009 f4ddd9c0 c18b4c5c f4ddd9dc f4dddc34 c132150b
[ 50.486272] Call Trace:
[ 50.486289] [<c1649116>] dump_stack+0x16/0x18
[ 50.486303] [<c103d2a4>] warn_slowpath_common+0x74/0x90
[ 50.486315] [<c132150b>] ? check_crtc_state+0x6eb/0xe60
[ 50.486325] [<c132150b>] ? check_crtc_state+0x6eb/0xe60
[ 50.486336] [<c103d33e>] warn_slowpath_fmt+0x2e/0x30
[ 50.486347] [<c132150b>] check_crtc_state+0x6eb/0xe60
[ 50.486368] [<c132e0ab>] intel_modeset_check_state+0x28b/0x7a0
[ 50.486379] [<c132e5ef>] intel_set_mode+0x2f/0x40
[ 50.486390] [<c132f078>] intel_release_load_detect_pipe+0xc8/0xf0
[ 50.486401] [<c1332fa7>] intel_crt_detect+0x4a7/0x830
[ 50.486418] [<c12d84b0>] drm_helper_probe_single_connector_modes+0x2c0/0x360
[ 50.486430] [<c164d31c>] ? mutex_lock+0x1c/0x2a
[ 50.486443] [<c12ec5c8>] drm_mode_getconnector+0x338/0x3b0
[ 50.486455] [<c12ec290>] ? drm_mode_getcrtc+0xd0/0xd0
[ 50.486465] [<c12df362>] drm_ioctl+0x4f2/0x670
[ 50.486476] [<c12ec290>] ? drm_mode_getcrtc+0xd0/0xd0
[ 50.486490] [<c117f465>] ? xfs_file_aio_write+0xd5/0x100
[ 50.486500] [<c12dee70>] ? drm_free_buffer+0x30/0x30
[ 50.486510] [<c10e0b8b>] do_vfs_ioctl+0x6b/0x580
[ 50.486523] [<c10d0f77>] ? do_sync_write+0x77/0xa0
[ 50.486535] [<c10d1b5d>] ? vfs_write+0x15d/0x1b0
[ 50.486545] [<c10e10e0>] SyS_ioctl+0x40/0x70
[ 50.486556] [<c164efbe>] sysenter_do_call+0x12/0x26
[ 50.486564] ---[ end trace b2e4d80ec333e235 ]---
[ 50.486569] [drm:intel_dump_pipe_config], [CRTC:4][hw state] config for pipe B
[ 50.486577] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 50.486582] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 50.486589] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 50.486598] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 50.486606] [drm:intel_dump_pipe_config], requested mode:
[ 50.486612] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1400 0 0 0 1050 0 0 0 0x0 0x0
[ 50.486623] [drm:intel_dump_pipe_config], adjusted mode:
[ 50.486628] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
[ 50.486638] [drm:intel_dump_crtc_timings], crtc timings: 48000 1400 1448 1560 1640 1050 1051 1054 1065, type: 0x0 flags: 0xa
[ 50.486649] [drm:intel_dump_pipe_config], port clock: 48000
[ 50.486654] [drm:intel_dump_pipe_config], pipe src size: 1400x1050
[ 50.486660] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
[ 50.486668] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 50.486675] [drm:intel_dump_pipe_config], ips: 0
[ 50.486681] [drm:intel_dump_pipe_config], double wide: 0
[ 50.486686] [drm:intel_dump_pipe_config], [CRTC:4][sw state] config for pipe B
[ 50.486693] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 50.486698] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
[ 50.486704] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 50.486713] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 50.486721] [drm:intel_dump_pipe_config], requested mode:
[ 50.486726] [drm:drm_mode_debug_printmodeline], Modeline 0:"1400x1050" 62 108000 1400 1448 1560 1640 1050 1051 1054 1065 0x48 0xa
[ 50.486738] [drm:intel_dump_pipe_config], adjusted mode:
[ 50.486743] [drm:drm_mode_debug_printmodeline], Modeline 0:"1400x1050" 62 108000 1400 1448 1560 1640 1050 1051 1054 1065 0x48 0xa
[ 50.486755] [drm:intel_dump_crtc_timings], crtc timings: 108000 1400 1448 1560 1640 1050 1051 1054 1065, type: 0x48 flags: 0xa
[ 50.486765] [drm:intel_dump_pipe_config], port clock: 108000
[ 50.486771] [drm:intel_dump_pipe_config], pipe src size: 1400x1050
[ 50.486777] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
[ 50.486784] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 50.486791] [drm:intel_dump_pipe_config], ips: 0
[ 50.486797] [drm:intel_dump_pipe_config], double wide: 0
[ 50.486805] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 51.340438] [drm:drm_mode_addfb], [FB:17]
[ 51.340455] [drm:drm_mode_setcrtc], [CRTC:4]
[ 51.340470] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
[ 51.340475] [drm:intel_crtc_set_config], [CRTC:4] [FB:17] #connectors=1 (x y) (0 0)
[ 51.340494] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=1
[ 51.340499] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 51.349652] [drm:i8xx_irq_handler], pipe A underrun
[ 51.349657] [drm:i8xx_irq_handler], pipe B underrun
[ 51.349682] [drm:i9xx_update_plane], Writing base 01000000 00000000 0 0 8192
[ 51.840053] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=0
[ 51.840367] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 51.840376] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 61.402425] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 61.402441] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 61.402445] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1]
[ 61.402471] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 61.402474] [drm:drm_mode_debug_printmodeline], Modeline 8:"1400x1050" 62 108000 1400 1448 1560 1640 1050 1051 1054 1065 0x48 0xa
[ 61.402483] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 61.402686] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 61.402690] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 61.402694] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
[ 61.402976] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 61.402979] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 61.402984] [drm:intel_get_load_detect_pipe], [CONNECTOR:11:VGA-1], [ENCODER:12:DAC-12]
[ 61.402988] [drm:intel_get_load_detect_pipe], reusing fbdev for load-detection framebuffer
[ 61.402996] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[ 61.403007] [drm:connected_sink_compute_bpp], [CONNECTOR:11:VGA-1] checking for sink bpp constrains
[ 61.403011] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[ 61.403015] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
[ 61.403018] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 61.403020] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 61.403023] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 61.403026] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 61.403030] [drm:intel_dump_pipe_config], requested mode:
[ 61.403032] [drm:drm_mode_debug_printmodeline], Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa
[ 61.403037] [drm:intel_dump_pipe_config], adjusted mode:
[ 61.403039] [drm:drm_mode_debug_printmodeline], Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa
[ 61.403043] [drm:intel_dump_crtc_timings], crtc timings: 31500 640 664 704 832 480 489 491 520, type: 0x10 flags: 0xa
[ 61.403047] [drm:intel_dump_pipe_config], port clock: 31500
[ 61.403050] [drm:intel_dump_pipe_config], pipe src size: 640x480
[ 61.403052] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 61.403055] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 61.403058] [drm:intel_dump_pipe_config], ips: 0
[ 61.403060] [drm:intel_dump_pipe_config], double wide: 0
[ 61.407083] [drm:i9xx_update_plane], Writing base 00020000 00000000 0 0 5632
[ 61.407091] [drm:intel_crtc_mode_set], [ENCODER:12:DAC-12] set [MODE:0:640x480]
[ 61.407800] [drm:i85x_get_fifo_size], FIFO size - (0x00015455) A: 42
[ 61.407803] [drm:intel_calculate_wm], FIFO entries required for mode: 20
[ 61.407806] [drm:intel_calculate_wm], FIFO watermark level: 20
[ 61.407808] [drm:i85x_get_fifo_size], FIFO size - (0x00015455) B: 42
[ 61.407811] [drm:intel_calculate_wm], FIFO entries required for mode: 68
[ 61.407813] [drm:intel_calculate_wm], FIFO watermark level: -28
[ 61.407816] [drm:i9xx_update_wm], FIFO watermarks - A: 20, B: 1
[ 61.407819] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 20, B: 1, C: 2, SR 1
[ 61.440157] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 61.440173] [drm:intel_connector_check_state], [CONNECTOR:11:VGA-1]
[ 61.441174] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[ 61.441183] [drm:check_encoder_state], [ENCODER:12:DAC-12]
[ 61.441191] [drm:check_encoder_state], [ENCODER:13:None-13]
[ 61.441198] [drm:check_crtc_state], [CRTC:3]
[ 61.441217] [drm:check_crtc_state], [CRTC:4]
[ 61.441235] [drm:intel_pipe_config_compare] *ERROR* mismatch in adjusted_mode.crtc_clock (expected 108000, found 48000)
[ 61.441242] ------------[ cut here ]------------
[ 61.441267] WARNING: CPU: 0 PID: 2152 at /home/Projects/Linux-git/drivers/gpu/drm/i915/intel_display.c:9284 check_crtc_state+0x6eb/0xe60()
[ 61.441272] pipe state doesn't match!
[ 61.441277] Modules linked in:
[ 61.441290] CPU: 0 PID: 2152 Comm: Xorg Tainted: G W 3.13.0-rc2-00035-gda75339 #2
[ 61.441296] Hardware name: Acer TravelMate 660/TravelMate 660, BIOS 3A19 01/14/2004
[ 61.441303] f4ddd970 f4ddd970 f4ddd930 c1649116 f4ddd960 c103d2a4 c18b4c5c f4ddd98c
[ 61.441319] 00000868 c18838d4 00002444 c132150b c132150b f5c14040 f5d799e8 f5c14680
[ 61.441334] f4ddd978 c103d33e 00000009 f4ddd970 c18b4c5c f4ddd98c f4dddbe4 c132150b
[ 61.441349] Call Trace:
[ 61.441367] [<c1649116>] dump_stack+0x16/0x18
[ 61.441381] [<c103d2a4>] warn_slowpath_common+0x74/0x90
[ 61.441393] [<c132150b>] ? check_crtc_state+0x6eb/0xe60
[ 61.441404] [<c132150b>] ? check_crtc_state+0x6eb/0xe60
[ 61.441415] [<c103d33e>] warn_slowpath_fmt+0x2e/0x30
[ 61.441426] [<c132150b>] check_crtc_state+0x6eb/0xe60
[ 61.441447] [<c132e0ab>] intel_modeset_check_state+0x28b/0x7a0
[ 61.441458] [<c132e5ef>] intel_set_mode+0x2f/0x40
[ 61.441469] [<c132faf7>] intel_get_load_detect_pipe+0x247/0x3e0
[ 61.441484] [<c106cb65>] ? vprintk+0x35/0x40
[ 61.441498] [<c12e43ca>] ? drm_ut_debug_printk+0x2a/0x50
[ 61.441508] [<c1332ab1>] ? intel_crt_detect_ddc+0x71/0xc0
[ 61.441518] [<c1332f7f>] intel_crt_detect+0x47f/0x830
[ 61.441535] [<c12d84b0>] drm_helper_probe_single_connector_modes+0x2c0/0x360
[ 61.441548] [<c164d31c>] ? mutex_lock+0x1c/0x2a
[ 61.441560] [<c12ec5c8>] drm_mode_getconnector+0x338/0x3b0
[ 61.441573] [<c12ec290>] ? drm_mode_getcrtc+0xd0/0xd0
[ 61.441582] [<c12df362>] drm_ioctl+0x4f2/0x670
[ 61.441592] [<c12ec290>] ? drm_mode_getcrtc+0xd0/0xd0
[ 61.441604] [<c12dee70>] ? drm_free_buffer+0x30/0x30
[ 61.441616] [<c10e0b8b>] do_vfs_ioctl+0x6b/0x580
[ 61.441629] [<c10d1017>] ? do_sync_read+0x77/0xa0
[ 61.441641] [<c10d1ca1>] ? vfs_read+0xf1/0x140
[ 61.441651] [<c10e10e0>] SyS_ioctl+0x40/0x70
[ 61.441663] [<c164efbe>] sysenter_do_call+0x12/0x26
[ 61.441670] ---[ end trace b2e4d80ec333e236 ]---
[ 61.441676] [drm:intel_dump_pipe_config], [CRTC:4][hw state] config for pipe B
[ 61.441683] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 61.441689] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 61.441696] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 61.441705] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 61.441713] [drm:intel_dump_pipe_config], requested mode:
[ 61.441719] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1400 0 0 0 1050 0 0 0 0x0 0x0
[ 61.441730] [drm:intel_dump_pipe_config], adjusted mode:
[ 61.441735] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
[ 61.441745] [drm:intel_dump_crtc_timings], crtc timings: 48000 1400 1448 1560 1640 1050 1051 1054 1065, type: 0x0 flags: 0xa
[ 61.441756] [drm:intel_dump_pipe_config], port clock: 48000
[ 61.441762] [drm:intel_dump_pipe_config], pipe src size: 1400x1050
[ 61.441768] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
[ 61.441775] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 61.441783] [drm:intel_dump_pipe_config], ips: 0
[ 61.441788] [drm:intel_dump_pipe_config], double wide: 0
[ 61.441794] [drm:intel_dump_pipe_config], [CRTC:4][sw state] config for pipe B
[ 61.441800] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 61.441805] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
[ 61.441812] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 61.441821] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 61.441829] [drm:intel_dump_pipe_config], requested mode:
[ 61.441834] [drm:drm_mode_debug_printmodeline], Modeline 0:"1400x1050" 62 108000 1400 1448 1560 1640 1050 1051 1054 1065 0x48 0xa
[ 61.441846] [drm:intel_dump_pipe_config], adjusted mode:
[ 61.441851] [drm:drm_mode_debug_printmodeline], Modeline 0:"1400x1050" 62 108000 1400 1448 1560 1640 1050 1051 1054 1065 0x48 0xa
[ 61.441862] [drm:intel_dump_crtc_timings], crtc timings: 108000 1400 1448 1560 1640 1050 1051 1054 1065, type: 0x48 flags: 0xa
[ 61.441873] [drm:intel_dump_pipe_config], port clock: 108000
[ 61.441878] [drm:intel_dump_pipe_config], pipe src size: 1400x1050
[ 61.441885] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
[ 61.441892] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 61.441899] [drm:intel_dump_pipe_config], ips: 0
[ 61.441904] [drm:intel_dump_pipe_config], double wide: 0
[ 61.460339] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 61.460354] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 61.460362] [drm:intel_crt_load_detect], starting load-detect on CRT
[ 61.462939] [drm:intel_release_load_detect_pipe], [CONNECTOR:11:VGA-1], [ENCODER:12:DAC-12]
[ 61.462956] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 1
[ 61.485050] [drm:i85x_get_fifo_size], FIFO size - (0x00015455) A: 42
[ 61.485063] [drm:i85x_get_fifo_size], FIFO size - (0x00015455) B: 42
[ 61.485070] [drm:intel_calculate_wm], FIFO entries required for mode: 68
[ 61.485076] [drm:intel_calculate_wm], FIFO watermark level: -28
[ 61.485082] [drm:i9xx_update_wm], FIFO watermarks - A: 40, B: 1
[ 61.485089] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 40, B: 1, C: 2, SR 1
[ 61.485109] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 61.486226] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[ 61.486235] [drm:check_encoder_state], [ENCODER:12:DAC-12]
[ 61.486243] [drm:check_encoder_state], [ENCODER:13:None-13]
[ 61.486249] [drm:check_crtc_state], [CRTC:3]
[ 61.486256] [drm:check_crtc_state], [CRTC:4]
[ 61.486276] [drm:intel_pipe_config_compare] *ERROR* mismatch in adjusted_mode.crtc_clock (expected 108000, found 48000)
[ 61.486283] ------------[ cut here ]------------
[ 61.486303] WARNING: CPU: 0 PID: 2152 at /home/Projects/Linux-git/drivers/gpu/drm/i915/intel_display.c:9284 check_crtc_state+0x6eb/0xe60()
[ 61.486308] pipe state doesn't match!
[ 61.486312] Modules linked in:
[ 61.486324] CPU: 0 PID: 2152 Comm: Xorg Tainted: G W 3.13.0-rc2-00035-gda75339 #2
[ 61.486331] Hardware name: Acer TravelMate 660/TravelMate 660, BIOS 3A19 01/14/2004
[ 61.486337] f4ddd9c0 f4ddd9c0 f4ddd980 c1649116 f4ddd9b0 c103d2a4 c18b4c5c f4ddd9dc
[ 61.486354] 00000868 c18838d4 00002444 c132150b c132150b f5c14040 f5d799e8 f5c14680
[ 61.486368] f4ddd9c8 c103d33e 00000009 f4ddd9c0 c18b4c5c f4ddd9dc f4dddc34 c132150b
[ 61.486383] Call Trace:
[ 61.486400] [<c1649116>] dump_stack+0x16/0x18
[ 61.486413] [<c103d2a4>] warn_slowpath_common+0x74/0x90
[ 61.486425] [<c132150b>] ? check_crtc_state+0x6eb/0xe60
[ 61.486436] [<c132150b>] ? check_crtc_state+0x6eb/0xe60
[ 61.486446] [<c103d33e>] warn_slowpath_fmt+0x2e/0x30
[ 61.486458] [<c132150b>] check_crtc_state+0x6eb/0xe60
[ 61.486478] [<c132e0ab>] intel_modeset_check_state+0x28b/0x7a0
[ 61.486490] [<c132e5ef>] intel_set_mode+0x2f/0x40
[ 61.486500] [<c132f078>] intel_release_load_detect_pipe+0xc8/0xf0
[ 61.486511] [<c1332fa7>] intel_crt_detect+0x4a7/0x830
[ 61.486528] [<c12d84b0>] drm_helper_probe_single_connector_modes+0x2c0/0x360
[ 61.486541] [<c164d31c>] ? mutex_lock+0x1c/0x2a
[ 61.486553] [<c12ec5c8>] drm_mode_getconnector+0x338/0x3b0
[ 61.486565] [<c12ec290>] ? drm_mode_getcrtc+0xd0/0xd0
[ 61.486575] [<c12df362>] drm_ioctl+0x4f2/0x670
[ 61.486586] [<c12ec290>] ? drm_mode_getcrtc+0xd0/0xd0
[ 61.486598] [<c12dee70>] ? drm_free_buffer+0x30/0x30
[ 61.486608] [<c10e0b8b>] do_vfs_ioctl+0x6b/0x580
[ 61.486621] [<c10d1017>] ? do_sync_read+0x77/0xa0
[ 61.486632] [<c10d1ca1>] ? vfs_read+0xf1/0x140
[ 61.486642] [<c10e10e0>] SyS_ioctl+0x40/0x70
[ 61.486654] [<c164efbe>] sysenter_do_call+0x12/0x26
[ 61.486661] ---[ end trace b2e4d80ec333e237 ]---
[ 61.486667] [drm:intel_dump_pipe_config], [CRTC:4][hw state] config for pipe B
[ 61.486674] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 61.486680] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 61.486686] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 61.486695] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 61.486704] [drm:intel_dump_pipe_config], requested mode:
[ 61.486709] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1400 0 0 0 1050 0 0 0 0x0 0x0
[ 61.486720] [drm:intel_dump_pipe_config], adjusted mode:
[ 61.486725] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
[ 61.486735] [drm:intel_dump_crtc_timings], crtc timings: 48000 1400 1448 1560 1640 1050 1051 1054 1065, type: 0x0 flags: 0xa
[ 61.486746] [drm:intel_dump_pipe_config], port clock: 48000
[ 61.486752] [drm:intel_dump_pipe_config], pipe src size: 1400x1050
[ 61.486758] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
[ 61.486765] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 61.486773] [drm:intel_dump_pipe_config], ips: 0
[ 61.486778] [drm:intel_dump_pipe_config], double wide: 0
[ 61.486784] [drm:intel_dump_pipe_config], [CRTC:4][sw state] config for pipe B
[ 61.486790] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 61.486795] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
[ 61.486801] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 61.486811] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 61.486819] [drm:intel_dump_pipe_config], requested mode:
[ 61.486824] [drm:drm_mode_debug_printmodeline], Modeline 0:"1400x1050" 62 108000 1400 1448 1560 1640 1050 1051 1054 1065 0x48 0xa
[ 61.486835] [drm:intel_dump_pipe_config], adjusted mode:
[ 61.486840] [drm:drm_mode_debug_printmodeline], Modeline 0:"1400x1050" 62 108000 1400 1448 1560 1640 1050 1051 1054 1065 0x48 0xa
[ 61.486852] [drm:intel_dump_crtc_timings], crtc timings: 108000 1400 1448 1560 1640 1050 1051 1054 1065, type: 0x48 flags: 0xa
[ 61.486862] [drm:intel_dump_pipe_config], port clock: 108000
[ 61.486868] [drm:intel_dump_pipe_config], pipe src size: 1400x1050
[ 61.486874] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
[ 61.486881] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 61.486888] [drm:intel_dump_pipe_config], ips: 0
[ 61.486894] [drm:intel_dump_pipe_config], double wide: 0
[ 61.486902] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 61.493126] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 61.493139] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 61.493143] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1]
[ 61.493168] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 61.493172] [drm:drm_mode_debug_printmodeline], Modeline 8:"1400x1050" 62 108000 1400 1448 1560 1640 1050 1051 1054 1065 0x48 0xa
[ 61.493181] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 61.493383] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 61.493387] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 61.493390] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
[ 61.493672] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 61.493675] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 61.493680] [drm:intel_get_load_detect_pipe], [CONNECTOR:11:VGA-1], [ENCODER:12:DAC-12]
[ 61.493684] [drm:intel_get_load_detect_pipe], reusing fbdev for load-detection framebuffer
[ 61.493693] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[ 61.493702] [drm:connected_sink_compute_bpp], [CONNECTOR:11:VGA-1] checking for sink bpp constrains
[ 61.493707] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[ 61.493710] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
[ 61.493713] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 61.493715] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 61.493718] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 61.493722] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 61.493725] [drm:intel_dump_pipe_config], requested mode:
[ 61.493727] [drm:drm_mode_debug_printmodeline], Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa
[ 61.493732] [drm:intel_dump_pipe_config], adjusted mode:
[ 61.493734] [drm:drm_mode_debug_printmodeline], Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa
[ 61.493739] [drm:intel_dump_crtc_timings], crtc timings: 31500 640 664 704 832 480 489 491 520, type: 0x10 flags: 0xa
[ 61.493743] [drm:intel_dump_pipe_config], port clock: 31500
[ 61.493745] [drm:intel_dump_pipe_config], pipe src size: 640x480
[ 61.493748] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 61.493751] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 61.493754] [drm:intel_dump_pipe_config], ips: 0
[ 61.493756] [drm:intel_dump_pipe_config], double wide: 0
[ 61.497231] [drm:i9xx_update_plane], Writing base 00020000 00000000 0 0 5632
[ 61.497237] [drm:intel_crtc_mode_set], [ENCODER:12:DAC-12] set [MODE:0:640x480]
[ 61.497945] [drm:i85x_get_fifo_size], FIFO size - (0x00015455) A: 42
[ 61.497949] [drm:intel_calculate_wm], FIFO entries required for mode: 20
[ 61.497951] [drm:intel_calculate_wm], FIFO watermark level: 20
[ 61.497954] [drm:i85x_get_fifo_size], FIFO size - (0x00015455) B: 42
[ 61.497957] [drm:intel_calculate_wm], FIFO entries required for mode: 68
[ 61.497959] [drm:intel_calculate_wm], FIFO watermark level: -28
[ 61.497961] [drm:i9xx_update_wm], FIFO watermarks - A: 20, B: 1
[ 61.497964] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 20, B: 1, C: 2, SR 1
[ 61.530060] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 61.530075] [drm:intel_connector_check_state], [CONNECTOR:11:VGA-1]
[ 61.531075] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[ 61.531083] [drm:check_encoder_state], [ENCODER:12:DAC-12]
[ 61.531091] [drm:check_encoder_state], [ENCODER:13:None-13]
[ 61.531098] [drm:check_crtc_state], [CRTC:3]
[ 61.531116] [drm:check_crtc_state], [CRTC:4]
[ 61.531134] [drm:intel_pipe_config_compare] *ERROR* mismatch in adjusted_mode.crtc_clock (expected 108000, found 48000)
[ 61.531141] ------------[ cut here ]------------
[ 61.531166] WARNING: CPU: 0 PID: 2152 at /home/Projects/Linux-git/drivers/gpu/drm/i915/intel_display.c:9284 check_crtc_state+0x6eb/0xe60()
[ 61.531172] pipe state doesn't match!
[ 61.531176] Modules linked in:
[ 61.531190] CPU: 0 PID: 2152 Comm: Xorg Tainted: G W 3.13.0-rc2-00035-gda75339 #2
[ 61.531196] Hardware name: Acer TravelMate 660/TravelMate 660, BIOS 3A19 01/14/2004
[ 61.531203] f4ddd970 f4ddd970 f4ddd930 c1649116 f4ddd960 c103d2a4 c18b4c5c f4ddd98c
[ 61.531219] 00000868 c18838d4 00002444 c132150b c132150b f5c14040 f5d799e8 f5c14680
[ 61.531234] f4ddd978 c103d33e 00000009 f4ddd970 c18b4c5c f4ddd98c f4dddbe4 c132150b
[ 61.531249] Call Trace:
[ 61.531268] [<c1649116>] dump_stack+0x16/0x18
[ 61.531282] [<c103d2a4>] warn_slowpath_common+0x74/0x90
[ 61.531294] [<c132150b>] ? check_crtc_state+0x6eb/0xe60
[ 61.531304] [<c132150b>] ? check_crtc_state+0x6eb/0xe60
[ 61.531315] [<c103d33e>] warn_slowpath_fmt+0x2e/0x30
[ 61.531326] [<c132150b>] check_crtc_state+0x6eb/0xe60
[ 61.531348] [<c132e0ab>] intel_modeset_check_state+0x28b/0x7a0
[ 61.531359] [<c132e5ef>] intel_set_mode+0x2f/0x40
[ 61.531370] [<c132faf7>] intel_get_load_detect_pipe+0x247/0x3e0
[ 61.531385] [<c106cb65>] ? vprintk+0x35/0x40
[ 61.531399] [<c12e43ca>] ? drm_ut_debug_printk+0x2a/0x50
[ 61.531410] [<c1332ab1>] ? intel_crt_detect_ddc+0x71/0xc0
[ 61.531420] [<c1332f7f>] intel_crt_detect+0x47f/0x830
[ 61.531437] [<c12d84b0>] drm_helper_probe_single_connector_modes+0x2c0/0x360
[ 61.531449] [<c164d31c>] ? mutex_lock+0x1c/0x2a
[ 61.531462] [<c12ec5c8>] drm_mode_getconnector+0x338/0x3b0
[ 61.531474] [<c12ec290>] ? drm_mode_getcrtc+0xd0/0xd0
[ 61.531483] [<c12df362>] drm_ioctl+0x4f2/0x670
[ 61.531494] [<c12ec290>] ? drm_mode_getcrtc+0xd0/0xd0
[ 61.531506] [<c12dee70>] ? drm_free_buffer+0x30/0x30
[ 61.531517] [<c10e0b8b>] do_vfs_ioctl+0x6b/0x580
[ 61.531531] [<c10d1017>] ? do_sync_read+0x77/0xa0
[ 61.531542] [<c10d1ca1>] ? vfs_read+0xf1/0x140
[ 61.531552] [<c10e10e0>] SyS_ioctl+0x40/0x70
[ 61.531564] [<c164efbe>] sysenter_do_call+0x12/0x26
[ 61.531572] ---[ end trace b2e4d80ec333e238 ]---
[ 61.531577] [drm:intel_dump_pipe_config], [CRTC:4][hw state] config for pipe B
[ 61.531584] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 61.531590] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 61.531596] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 61.531605] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 61.531614] [drm:intel_dump_pipe_config], requested mode:
[ 61.531620] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1400 0 0 0 1050 0 0 0 0x0 0x0
[ 61.531630] [drm:intel_dump_pipe_config], adjusted mode:
[ 61.531636] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
[ 61.531645] [drm:intel_dump_crtc_timings], crtc timings: 48000 1400 1448 1560 1640 1050 1051 1054 1065, type: 0x0 flags: 0xa
[ 61.531656] [drm:intel_dump_pipe_config], port clock: 48000
[ 61.531662] [drm:intel_dump_pipe_config], pipe src size: 1400x1050
[ 61.531668] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
[ 61.531675] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 61.531683] [drm:intel_dump_pipe_config], ips: 0
[ 61.531688] [drm:intel_dump_pipe_config], double wide: 0
[ 61.531694] [drm:intel_dump_pipe_config], [CRTC:4][sw state] config for pipe B
[ 61.531700] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 61.531705] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
[ 61.531711] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 61.531721] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 61.531729] [drm:intel_dump_pipe_config], requested mode:
[ 61.531734] [drm:drm_mode_debug_printmodeline], Modeline 0:"1400x1050" 62 108000 1400 1448 1560 1640 1050 1051 1054 1065 0x48 0xa
[ 61.531746] [drm:intel_dump_pipe_config], adjusted mode:
[ 61.531751] [drm:drm_mode_debug_printmodeline], Modeline 0:"1400x1050" 62 108000 1400 1448 1560 1640 1050 1051 1054 1065 0x48 0xa
[ 61.531762] [drm:intel_dump_crtc_timings], crtc timings: 108000 1400 1448 1560 1640 1050 1051 1054 1065, type: 0x48 flags: 0xa
[ 61.531773] [drm:intel_dump_pipe_config], port clock: 108000
[ 61.531778] [drm:intel_dump_pipe_config], pipe src size: 1400x1050
[ 61.531784] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
[ 61.531792] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 61.531798] [drm:intel_dump_pipe_config], ips: 0
[ 61.531804] [drm:intel_dump_pipe_config], double wide: 0
[ 61.550312] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 61.550321] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 61.550325] [drm:intel_crt_load_detect], starting load-detect on CRT
[ 61.553226] [drm:intel_release_load_detect_pipe], [CONNECTOR:11:VGA-1], [ENCODER:12:DAC-12]
[ 61.553236] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 1
[ 61.575040] [drm:i85x_get_fifo_size], FIFO size - (0x00015455) A: 42
[ 61.575052] [drm:i85x_get_fifo_size], FIFO size - (0x00015455) B: 42
[ 61.575057] [drm:intel_calculate_wm], FIFO entries required for mode: 68
[ 61.575062] [drm:intel_calculate_wm], FIFO watermark level: -28
[ 61.575067] [drm:i9xx_update_wm], FIFO watermarks - A: 40, B: 1
[ 61.575072] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 40, B: 1, C: 2, SR 1
[ 61.575089] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 61.576069] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[ 61.576075] [drm:check_encoder_state], [ENCODER:12:DAC-12]
[ 61.576081] [drm:check_encoder_state], [ENCODER:13:None-13]
[ 61.576086] [drm:check_crtc_state], [CRTC:3]
[ 61.576091] [drm:check_crtc_state], [CRTC:4]
[ 61.576108] [drm:intel_pipe_config_compare] *ERROR* mismatch in adjusted_mode.crtc_clock (expected 108000, found 48000)
[ 61.576114] ------------[ cut here ]------------
[ 61.576131] WARNING: CPU: 0 PID: 2152 at /home/Projects/Linux-git/drivers/gpu/drm/i915/intel_display.c:9284 check_crtc_state+0x6eb/0xe60()
[ 61.576135] pipe state doesn't match!
[ 61.576138] Modules linked in:
[ 61.576148] CPU: 0 PID: 2152 Comm: Xorg Tainted: G W 3.13.0-rc2-00035-gda75339 #2
[ 61.576153] Hardware name: Acer TravelMate 660/TravelMate 660, BIOS 3A19 01/14/2004
[ 61.576158] f4ddd9c0 f4ddd9c0 f4ddd980 c1649116 f4ddd9b0 c103d2a4 c18b4c5c f4ddd9dc
[ 61.576170] 00000868 c18838d4 00002444 c132150b c132150b f5c14040 f5d799e8 f5c14680
[ 61.576180] f4ddd9c8 c103d33e 00000009 f4ddd9c0 c18b4c5c f4ddd9dc f4dddc34 c132150b
[ 61.576192] Call Trace:
[ 61.576205] [<c1649116>] dump_stack+0x16/0x18
[ 61.576216] [<c103d2a4>] warn_slowpath_common+0x74/0x90
[ 61.576225] [<c132150b>] ? check_crtc_state+0x6eb/0xe60
[ 61.576233] [<c132150b>] ? check_crtc_state+0x6eb/0xe60
[ 61.576241] [<c103d33e>] warn_slowpath_fmt+0x2e/0x30
[ 61.576249] [<c132150b>] check_crtc_state+0x6eb/0xe60
[ 61.576265] [<c132e0ab>] intel_modeset_check_state+0x28b/0x7a0
[ 61.576274] [<c132e5ef>] intel_set_mode+0x2f/0x40
[ 61.576282] [<c132f078>] intel_release_load_detect_pipe+0xc8/0xf0
[ 61.576290] [<c1332fa7>] intel_crt_detect+0x4a7/0x830
[ 61.576304] [<c12d84b0>] drm_helper_probe_single_connector_modes+0x2c0/0x360
[ 61.576314] [<c164d31c>] ? mutex_lock+0x1c/0x2a
[ 61.576323] [<c12ec5c8>] drm_mode_getconnector+0x338/0x3b0
[ 61.576332] [<c12ec290>] ? drm_mode_getcrtc+0xd0/0xd0
[ 61.576340] [<c12df362>] drm_ioctl+0x4f2/0x670
[ 61.576347] [<c12ec290>] ? drm_mode_getcrtc+0xd0/0xd0
[ 61.576356] [<c12dee70>] ? drm_free_buffer+0x30/0x30
[ 61.576365] [<c10e0b8b>] do_vfs_ioctl+0x6b/0x580
[ 61.576374] [<c10d1017>] ? do_sync_read+0x77/0xa0
[ 61.576383] [<c10d1ca1>] ? vfs_read+0xf1/0x140
[ 61.576390] [<c10e10e0>] SyS_ioctl+0x40/0x70
[ 61.576399] [<c164efbe>] sysenter_do_call+0x12/0x26
[ 61.576405] ---[ end trace b2e4d80ec333e239 ]---
[ 61.576409] [drm:intel_dump_pipe_config], [CRTC:4][hw state] config for pipe B
[ 61.576415] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 61.576419] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 61.576424] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 61.576431] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 61.576437] [drm:intel_dump_pipe_config], requested mode:
[ 61.576441] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1400 0 0 0 1050 0 0 0 0x0 0x0
[ 61.576450] [drm:intel_dump_pipe_config], adjusted mode:
[ 61.576454] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
[ 61.576461] [drm:intel_dump_crtc_timings], crtc timings: 48000 1400 1448 1560 1640 1050 1051 1054 1065, type: 0x0 flags: 0xa
[ 61.576469] [drm:intel_dump_pipe_config], port clock: 48000
[ 61.576473] [drm:intel_dump_pipe_config], pipe src size: 1400x1050
[ 61.576478] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
[ 61.576484] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 61.576489] [drm:intel_dump_pipe_config], ips: 0
[ 61.576493] [drm:intel_dump_pipe_config], double wide: 0
[ 61.576497] [drm:intel_dump_pipe_config], [CRTC:4][sw state] config for pipe B
[ 61.576502] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 61.576506] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
[ 61.576511] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 61.576518] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 61.576524] [drm:intel_dump_pipe_config], requested mode:
[ 61.576527] [drm:drm_mode_debug_printmodeline], Modeline 0:"1400x1050" 62 108000 1400 1448 1560 1640 1050 1051 1054 1065 0x48 0xa
[ 61.576536] [drm:intel_dump_pipe_config], adjusted mode:
[ 61.576540] [drm:drm_mode_debug_printmodeline], Modeline 0:"1400x1050" 62 108000 1400 1448 1560 1640 1050 1051 1054 1065 0x48 0xa
[ 61.576548] [drm:intel_dump_crtc_timings], crtc timings: 108000 1400 1448 1560 1640 1050 1051 1054 1065, type: 0x48 flags: 0xa
[ 61.576556] [drm:intel_dump_pipe_config], port clock: 108000
[ 61.576561] [drm:intel_dump_pipe_config], pipe src size: 1400x1050
[ 61.576565] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
[ 61.576571] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 61.576576] [drm:intel_dump_pipe_config], ips: 0
[ 61.576580] [drm:intel_dump_pipe_config], double wide: 0
[ 61.576587] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 61.860212] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=0
[ 61.860525] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 61.860534] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 71.880076] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=0
[ 71.880390] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 71.880399] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 74.966374] [drm:i8xx_irq_handler], pipe A underrun
[ 81.900089] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=0
[ 81.900389] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 81.900392] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 91.920059] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=0
[ 91.920351] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 91.920356] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 101.940036] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=0
[ 101.940325] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 101.940329] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 110.441097] [drm:intel_crtc_cursor_set], cursor off
[ 111.960021] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=0
[ 111.960309] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 111.960313] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 121.980048] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=0
[ 121.980356] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 121.980365] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 132.000037] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=0
[ 132.000368] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 132.000377] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 138.345007] [drm:intel_crtc_cursor_set], cursor off
[ 142.020046] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=0
[ 142.020354] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 142.020362] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
