On Wed, Feb 12, 2025 at 04:38:33PM +0200, Imre Deak wrote:
> On Tue, Feb 04, 2025 at 12:53:58PM +0200, Mika Kahola wrote:
> > The dedicated display PHYs reset to a power state that blocks S0ix,
> > increasing idle system power. After a system reset (cold boot,
> > S3/4/5, warm reset) if a dedicated PHY is not being brought up
> > shortly, use these steps to move the PHY to the lowest power state
> > to save power.
> >
> > 1. Follow the PLL Enable Sequence, using any valid frequency such as DP 1.62 GHz.
> > This brings lanes out of reset and enables the PLL to allow powerdown to be moved
> > to the Disable state.
> > 2. Follow PLL Disable Sequence. This moves powerdown to the Disable state and disables the PLL.
> >
> > v2: Rename WA function to more descriptive (Jani)
> > For PTL, only port A needs this wa
> > Add helpers to check presence of C10 phy and pll enabling (Imre)
> >
> > Signed-off-by: Mika Kahola <mika.kahola@xxxxxxxxx>
> > ---
> > drivers/gpu/drm/i915/display/intel_cx0_phy.c | 45 +++++++++++++++++++
> > drivers/gpu/drm/i915/display/intel_cx0_phy.h | 1 +
> > .../drm/i915/display/intel_display_reset.c | 2 +
> > drivers/gpu/drm/i915/display/intel_dpll_mgr.c | 2 +
> > 4 files changed, 50 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy.c b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> > index bffe3d4bbe8b..bd33ebb8c71e 100644
> > --- a/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> > +++ b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> > @@ -3559,3 +3559,48 @@ void intel_cx0pll_state_verify(struct intel_atomic_state *state,
> > else
> > intel_c20pll_state_verify(new_crtc_state, crtc, encoder, &mpll_hw_state.c20);
> > }
> > +
> > +static bool intel_cx0_pll_is_enabled(struct intel_display *display, enum port port)
> > +{
> > + u32 val = intel_de_read(display, XELPDP_PORT_CLOCK_CTL(display, port));
> > +
> > + if (REG_FIELD_GET(XELPDP_DDI_CLOCK_SELECT_MASK, val) == XELPDP_DDI_CLOCK_SELECT_NONE)
> > + return false;
>
> Shouldn't this check if the PLL request for either lane is set in
> XELPDP_PORT_CLOCK_CTL? AFAICS that's what actually enables the PLL,
> while the above is just some configuration.
>
> > +
> > + return true;
> > +}
> > +/*
> > + * WA 14022081154
> > + * The dedicated display PHYs reset to a power state that blocks S0ix, increasing idle
> > + * system power. After a system reset (cold boot, S3/4/5, warm reset) if a dedicated
> > + * PHY is not being brought up shortly, use these steps to move the PHY to the lowest
> > + * power state to save power. For PTL the workaround is needed only for port A. Port B
> > + * is not connected.
> > + *
> > + * 1. Follow the PLL Enable Sequence, using any valid frequency such as DP 1.62 GHz.
> > + * This brings lanes out of reset and enables the PLL to allow powerdown to be moved
> > + * to the Disable state.
> > + * 2. Follow PLL Disable Sequence. This moves powerdown to the Disable state and disables the PLL.
> > + */
> > +void ptl_power_save_wa(struct intel_display *display)
>
> I'd call it intel_cx0_pll_power_save_wa() following the naming rule for
> exported functions.
>
> > +{
> > + struct intel_encoder *encoder;
> > +
> > + if (DISPLAY_VER(display) != 30)
> > + return;
> > +
> > + for_each_intel_encoder(display->drm, encoder) {
> > + struct intel_cx0pll_state pll_state = {};
> > + int port_clock = 162000;
> > +
> > + if (!intel_encoder_is_c10phy(encoder))
> > + continue;
> > +
> > + if (intel_cx0_pll_is_enabled(display, encoder->port))
> > + continue;
> > +
> > + intel_c10pll_calc_state_from_table(encoder, mtl_c10_edp_tables, port_clock, true, &pll_state);
> > + __intel_cx0pll_enable(encoder, &pll_state, true, port_clock, 4);
> > + intel_cx0pll_disable(encoder);
> > + }
> > +}
> > diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy.h b/drivers/gpu/drm/i915/display/intel_cx0_phy.h
> > index 573fa7d3e88f..06346e4c5079 100644
> > --- a/drivers/gpu/drm/i915/display/intel_cx0_phy.h
> > +++ b/drivers/gpu/drm/i915/display/intel_cx0_phy.h
> > @@ -42,5 +42,6 @@ bool intel_cx0pll_compare_hw_state(const struct intel_cx0pll_state *a,
> > void intel_cx0_phy_set_signal_levels(struct intel_encoder *encoder,
> > const struct intel_crtc_state *crtc_state);
> > int intel_mtl_tbt_calc_port_clock(struct intel_encoder *encoder);
> > +void ptl_power_save_wa(struct intel_display *display);
> >
> > #endif /* __INTEL_CX0_PHY_H__ */
> > diff --git a/drivers/gpu/drm/i915/display/intel_display_reset.c b/drivers/gpu/drm/i915/display/intel_display_reset.c
> > index 093b386c95e8..b75827ff9c7e 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display_reset.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display_reset.c
> > @@ -7,6 +7,7 @@
> >
> > #include "i915_drv.h"
> > #include "intel_clock_gating.h"
> > +#include "intel_cx0_phy.h"
> > #include "intel_display_driver.h"
> > #include "intel_display_reset.h"
> > #include "intel_display_types.h"
> > @@ -116,6 +117,7 @@ void intel_display_reset_finish(struct drm_i915_private *i915)
> > intel_pps_unlock_regs_wa(display);
> > intel_display_driver_init_hw(display);
> > intel_clock_gating_init(i915);
> > + ptl_power_save_wa(display);
> > intel_hpd_init(i915);
> >
> > ret = __intel_display_driver_resume(display, state, ctx);
> > diff --git a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> > index b8fa04d3cd5c..24893d2f79e3 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> > @@ -27,6 +27,7 @@
> > #include "bxt_dpio_phy_regs.h"
> > #include "i915_drv.h"
> > #include "i915_reg.h"
> > +#include "intel_cx0_phy.h"
> > #include "intel_de.h"
> > #include "intel_display_types.h"
> > #include "intel_dkl_phy.h"
> > @@ -4552,6 +4553,7 @@ static void sanitize_dpll_state(struct drm_i915_private *i915,
> > return;
> >
> > adlp_cmtg_clock_gating_wa(i915, pll);
> > + ptl_power_save_wa(&i915->display);
>
> The WA is applied if the PLL is not on, so at least logically it should
> be applied before the !pll->on check above.
Also, sanitize_dpll_state() is called for each shared PLLs, which is not
yet implemented on PTL, so the WA should be called from
intel_dpll_sanitize_state().
>
> >
> > if (pll->active_mask)
> > return;
> > --
> > 2.43.0
> >
