There is an issue when pch_pfit and joiner gets enabled together. Moves the panel_fitting to later stage after pipe_src width is adjusted for joiner. Replace adjusted_mode with pipe_mode in pch_panel_fitting function so that correct value of pipe_src is used once joiner calculation are done. Also decouple the current intel_panel_fitting into pch and gmch panel fitting function. Nemesa Garg (6): drm/i915/display: Disable joiner and pfit drm/i915/display: Add gmch_panel_fitting in all encoders drm/i915/display: Replace adjusted mode with pipe mode drm/i915/display: Call panel_fitting from pipe_config drm/i915/dispaly: Allow joiner and pfit drm/i915/display: Initialize pipe_src in compute stage drivers/gpu/drm/i915/display/icl_dsi.c | 4 -- drivers/gpu/drm/i915/display/intel_display.c | 46 ++++++++++-- drivers/gpu/drm/i915/display/intel_dp.c | 6 +- drivers/gpu/drm/i915/display/intel_hdmi.c | 6 -- drivers/gpu/drm/i915/display/intel_lvds.c | 10 +-- drivers/gpu/drm/i915/display/intel_pfit.c | 74 +++++++++++++------- drivers/gpu/drm/i915/display/intel_pfit.h | 6 +- drivers/gpu/drm/i915/display/vlv_dsi.c | 9 ++- 8 files changed, 109 insertions(+), 52 deletions(-) -- 2.25.1
