Re: [PATCH] drm/i915: Wire up port A aux channel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Nov 07, 2013 at 02:49:55PM +0100, Daniel Vetter wrote:
> Useful for dp aux to work better. Also stop enabling the port A
> hotplug event - eDP panels are expected to fire that interupt and
> we're not really ready to deal with them. This is consistent with how
> we handle port A on ilk-hsw.
> 
> The more important bit is that we must delay the enabling of hotplug
> interrupts until all the encoders are fully set up. But we need irq
> support earlier than that, hence hotplug interrupts can only be
> enabled in the ->hpd_irq_setup callback.
> 
> v2: Drop the _HOTPLUG, it isn't (Ville).
> 
> Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxx>

Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>

> ---
>  drivers/gpu/drm/i915/i915_irq.c | 19 +++++++++++++++++--
>  drivers/gpu/drm/i915/i915_reg.h |  3 ++-
>  2 files changed, 19 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> index e1bfc85d1789..9304ce3e4649 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -1778,6 +1778,21 @@ static irqreturn_t gen8_irq_handler(int irq, void *arg)
>  		}
>  	}
>  
> +	if (master_ctl & GEN8_DE_PORT_IRQ) {
> +		tmp = I915_READ(GEN8_DE_PORT_IIR);
> +		if (tmp & GEN8_AUX_CHANNEL_A)
> +			dp_aux_irq_handler(dev);
> +		else if (tmp)
> +			DRM_ERROR("Unexpected DE Port interrupt\n");
> +		else
> +			DRM_ERROR("The master control interrupt lied (DE PORT)!\n");
> +
> +		if (tmp) {
> +			I915_WRITE(GEN8_DE_PORT_IIR, tmp);
> +			ret = IRQ_HANDLED;
> +		}
> +	}
> +
>  	for_each_pipe(pipe) {
>  		uint32_t pipe_iir;
>  
> @@ -2883,8 +2898,8 @@ static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv)
>  	}
>  	POSTING_READ(GEN8_DE_PIPE_ISR(0));
>  
> -	I915_WRITE(GEN8_DE_PORT_IMR, ~_PORT_DP_A_HOTPLUG);
> -	I915_WRITE(GEN8_DE_PORT_IER, _PORT_DP_A_HOTPLUG);
> +	I915_WRITE(GEN8_DE_PORT_IMR, ~GEN8_AUX_CHANNEL_A);
> +	I915_WRITE(GEN8_DE_PORT_IER, GEN8_AUX_CHANNEL_A);
>  	POSTING_READ(GEN8_DE_PORT_IER);
>  }
>  
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 9e7588345017..fe8cb4cc0296 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -4073,7 +4073,8 @@
>  #define GEN8_DE_PORT_IMR 0x44444
>  #define GEN8_DE_PORT_IIR 0x44448
>  #define GEN8_DE_PORT_IER 0x4444c
> -#define  _PORT_DP_A_HOTPLUG		(1 << 3)
> +#define  GEN8_PORT_DP_A_HOTPLUG		(1 << 3)
> +#define  GEN8_AUX_CHANNEL_A		(1 << 0)
>  
>  #define GEN8_DE_MISC_ISR 0x44460
>  #define GEN8_DE_MISC_IMR 0x44464
> -- 
> 1.8.4.rc3

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx





[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux