> -----Original Message-----
> From: Roper, Matthew D <matthew.d.roper@xxxxxxxxx>
> Sent: Saturday, October 12, 2024 3:16 AM
> To: Atwood, Matthew S <matthew.s.atwood@xxxxxxxxx>
> Cc: intel-xe@xxxxxxxxxxxxxxxxxxxxx; intel-gfx@xxxxxxxxxxxxxxxxxxxxx; Kandpal,
> Suraj <suraj.kandpal@xxxxxxxxx>; Taylor, Clinton A
> <clinton.a.taylor@xxxxxxxxx>
> Subject: Re: [PATCH v2 07/10] drm/i915/xe3lpd: Add C20 Phy consolidated
> programming table
>
> On Thu, Oct 10, 2024 at 03:43:08PM -0700, Matt Atwood wrote:
> > From: Suraj Kandpal <suraj.kandpal@xxxxxxxxx>
> >
> > From DISPLAY_VER() >= 30 C20 PHY consolidated programming table of DP
> > and eDP been merged and now use the same rates and values. eDP over
> > TypeC has also been introduced.
> > Moreover it allows more granular and higher rates. Add new table to
> > represent this change.
> >
> > Bspec: 68961
> > Signed-off-by: Suraj Kandpal <suraj.kandpal@xxxxxxxxx>
> > Signed-off-by: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
> > Reviewed-by: Clint Taylor <Clinton.A.Taylor@xxxxxxxxx>
> > ---
> > drivers/gpu/drm/i915/display/intel_cx0_phy.c | 24
> > ++++++++++++++++++--
> > 1 file changed, 22 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> > b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> > index f73d576fd99e..f1aea5ead41b 100644
> > --- a/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> > +++ b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> > @@ -1122,6 +1122,22 @@ static const struct intel_c20pll_state * const
> xe2hpd_c20_dp_tables[] = {
> > NULL,
> > };
> >
> > +static const struct intel_c20pll_state * const xe3lpd_c20_dp_edp_tables[]
> = {
> > + &mtl_c20_dp_rbr,
> > + &xe2hpd_c20_edp_r216,
> > + &xe2hpd_c20_edp_r243,
> > + &mtl_c20_dp_hbr1,
> > + &xe2hpd_c20_edp_r324,
> > + &xe2hpd_c20_edp_r432,
> > + &mtl_c20_dp_hbr2,
> > + &xe2hpd_c20_edp_r675,
> > + &mtl_c20_dp_hbr3,
> > + &mtl_c20_dp_uhbr10,
> > + &xe2hpd_c20_dp_uhbr13_5,
> > + &mtl_c20_dp_uhbr20,
> > + NULL,
> > +};
> > +
> > /*
> > * HDMI link rates with 38.4 MHz reference clock.
> > */
> > @@ -2242,11 +2258,15 @@ intel_c20_pll_tables_get(struct intel_crtc_state
> *crtc_state,
> > struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> >
> > if (intel_crtc_has_dp_encoder(crtc_state)) {
> > - if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_EDP))
> > - return xe2hpd_c20_edp_tables;
> > + if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_EDP)) {
> > + if (DISPLAY_VER_FULL(i915) == IP_VER(14, 1))
>
> It might be a bit simpler to && the conditions here instead of nesting if's.
I kept it like this because in the next patch I add a condition for edp over type c
>
> > + return xe2hpd_c20_edp_tables;
> > + }
> >
> > if (DISPLAY_VER_FULL(i915) == IP_VER(14, 1))
> > return xe2hpd_c20_dp_tables;
> > + else if (DISPLAY_VER(i915) >= 30)
>
> Shouldn't this ladder be using the standard "newest platform first"
> ordering?
Sure will add that change
Regards,
Suraj Kandpal
>
>
> Matt
>
> > + return xe3lpd_c20_dp_edp_tables;
> > else
> > return mtl_c20_dp_tables;
> >
> > --
> > 2.45.0
> >
>
> --
> Matt Roper
> Graphics Software Engineer
> Linux GPU Platform Enablement
> Intel Corporation
