A registered eDP connector is considered to be always connected, so it's unnecessary to poll it for a connect/disconnect event. Polling it involves AUX accesses toggling the panel power, which in turn can generate a spurious short HPD pulse and possibly a new poll cycle via the short HPD handler runtime resuming the device. Avoid this by disabling the polling for eDP connectors. This avoids IGT tests timing out while waiting for the device to runtime suspend, the timeout caused by the above runtime resume->poll->suspend-> resume cycle keeping the device in the resumed state. Testcase: igt/kms_pm_rpm/unverisal-planes Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx> --- drivers/gpu/drm/i915/display/intel_dp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c index 3eff35dd59b8a..6b27fabd61c37 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.c +++ b/drivers/gpu/drm/i915/display/intel_dp.c @@ -6476,7 +6476,8 @@ intel_dp_init_connector(struct intel_digital_port *dig_port, if (!HAS_GMCH(dev_priv) && DISPLAY_VER(dev_priv) < 12) connector->interlace_allowed = true; - intel_connector->polled = DRM_CONNECTOR_POLL_HPD; + if (type != DRM_MODE_CONNECTOR_eDP) + intel_connector->polled = DRM_CONNECTOR_POLL_HPD; intel_connector->base.polled = intel_connector->polled; intel_connector_attach_encoder(intel_connector, intel_encoder); -- 2.44.2
