Re: [PATCH 1/3] drm/i915/dp: use fsleep instead of usleep_rage for LT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Sep 23, 2024 at 01:24:27PM +0300, Jani Nikula wrote:
> On Thu, 12 Sep 2024, Arun R Murthy <arun.r.murthy@xxxxxxxxx> wrote:
> > Aux RD Interval value depends on the value read from the dpcd register
> > which is updated from the sink device use flseep thereby we adhere to
> > the Documentation/timers/timers-howto.rst
> >
> > Signed-off-by: Srikanth V NagaVenkata <nagavenkata.srikanth.v@xxxxxxxxx>
> > Signed-off-by: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
> 
> With the commit message updated to explain why,

While at it, please also fix the typo s/usleep_rage/usleep_range/.

Francois

> 
> Reviewed-by: Jani Nikula <jani.nikula@xxxxxxxxx>
> 
> > ---
> >  drivers/gpu/drm/i915/display/intel_dp_link_training.c | 6 +++---
> >  1 file changed, 3 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_training.c b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
> > index 397cc4ebae52..f41b69840ad9 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp_link_training.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
> > @@ -898,7 +898,7 @@ intel_dp_link_training_clock_recovery(struct intel_dp *intel_dp,
> >  
> >  	voltage_tries = 1;
> >  	for (cr_tries = 0; cr_tries < max_cr_tries; ++cr_tries) {
> > -		usleep_range(delay_us, 2 * delay_us);
> > +		fsleep(delay_us);
> >  
> >  		if (drm_dp_dpcd_read_phy_link_status(&intel_dp->aux, dp_phy,
> >  						     link_status) < 0) {
> > @@ -1040,7 +1040,7 @@ intel_dp_link_training_channel_equalization(struct intel_dp *intel_dp,
> >  	}
> >  
> >  	for (tries = 0; tries < 5; tries++) {
> > -		usleep_range(delay_us, 2 * delay_us);
> > +		fsleep(delay_us);
> >  
> >  		if (drm_dp_dpcd_read_phy_link_status(&intel_dp->aux, dp_phy,
> >  						     link_status) < 0) {
> > @@ -1417,7 +1417,7 @@ intel_dp_128b132b_lane_eq(struct intel_dp *intel_dp,
> >  	deadline = jiffies + msecs_to_jiffies_timeout(400);
> >  
> >  	for (try = 0; try < max_tries; try++) {
> > -		usleep_range(delay_us, 2 * delay_us);
> > +		fsleep(delay_us);
> >  
> >  		/*
> >  		 * The delay may get updated. The transmitter shall read the
> 
> -- 
> Jani Nikula, Intel



[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux