Re: [PATCH v2 4/5] drm/i915/display: Add registers and compute the strength

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 17 Sep 2024, Nemesa Garg <nemesa.garg@xxxxxxxxx> wrote:
> Add new registers and related bits. Compute the strength
> value and tap value based on display mode.
>
> v2: Replace i915/dev_priv with display[Jani]

This needs to be done harder. ;)

>
> Signed-off-by: Nemesa Garg <nemesa.garg@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c  |   7 +-
>  .../drm/i915/display/intel_sharpness_filter.c | 112 +++++++++++++++++-
>  .../drm/i915/display/intel_sharpness_filter.h |   5 +
>  drivers/gpu/drm/i915/i915_reg.h               |  17 +++
>  4 files changed, 139 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index a6e33238dac8..6fe434708cd7 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -5921,7 +5921,12 @@ static int intel_atomic_check_planes(struct intel_atomic_state *state)
>  		if (ret)
>  			return ret;
>  
> -		intel_sharpness_scaler_compute_config(new_crtc_state);
> +		if (sharp_compute(new_crtc_state)) {
> +			intel_sharpness_scaler_compute_config(new_crtc_state);
> +			ret = intel_sharpness_filter_compute_config(new_crtc_state);
> +			if (ret)
> +				return ret;
> +		}
>  
>  		/*
>  		 * On some platforms the number of active planes affects
> diff --git a/drivers/gpu/drm/i915/display/intel_sharpness_filter.c b/drivers/gpu/drm/i915/display/intel_sharpness_filter.c
> index 42073aa25edc..28cd5c51e5b8 100644
> --- a/drivers/gpu/drm/i915/display/intel_sharpness_filter.c
> +++ b/drivers/gpu/drm/i915/display/intel_sharpness_filter.c
> @@ -27,11 +27,88 @@ FILTER_COEFF_0_5, FILTER_COEFF_1_0, FILTER_COEFF_0_5, FILTER_COEFF_0_25, FILTER_
>  const u16 filtercoeff_3[] = {FILTER_COEFF_0_125, FILTER_COEFF_0_25,
>  FILTER_COEFF_0_5, FILTER_COEFF_1_0, FILTER_COEFF_0_5, FILTER_COEFF_0_25, FILTER_COEFF_0_125};
>  
> -void intel_sharpness_filter_enable(struct intel_crtc_state *crtc_state)
> +/* Default LUT values to be loaded one time. */
> +static const u16 lut_data[] = {
> +	4095, 2047, 1364, 1022, 816, 678, 579,
> +	504, 444, 397, 357, 323, 293, 268, 244, 224,
> +	204, 187, 170, 154, 139, 125, 111, 98, 85,
> +	73, 60, 48, 36, 24, 12, 0
> +};
> +
> +void intel_filter_lut_load(struct intel_crtc *crtc,
> +			   const struct intel_crtc_state *crtc_state)
>  {
>  	struct intel_display *display = to_intel_display(crtc);
> +	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);

Please enabled CONFIG_DRM_WERROR and build every patch in the series. It
would tell you this variable is unused.

Something along the lines of:

git rebase -i drm-tip/drm-tip -x make

> +	int i;
> +
> +	intel_de_write(display, SHRPLUT_INDEX(crtc->pipe), INDEX_AUTO_INCR | INDEX_VALUE(0));
> +
> +	for (i = 0; i < ARRAY_SIZE(lut_data); i++)
> +		intel_de_write(display, SHRPLUT_DATA(crtc->pipe), lut_data[i]);
> +}
> +
> +static void intel_sharpness_filter_size_compute(struct intel_crtc_state *crtc_state)
> +{
> +	const struct drm_display_mode *mode = &crtc_state->hw.adjusted_mode;
> +
> +	if (mode->hdisplay <= 1920 && mode->vdisplay <= 1080)
> +		crtc_state->hw.casf_params.win_size = 0;
> +	else if (mode->hdisplay <= 3840 && mode->vdisplay <= 2160)
> +		crtc_state->hw.casf_params.win_size = 1;
> +	else
> +		crtc_state->hw.casf_params.win_size = 2;
> +}
> +
> +bool intel_sharpness_strength_changed(struct intel_atomic_state *state)
> +{
> +	int i;
> +	struct intel_crtc_state *old_crtc_state, *new_crtc_state;
> +	struct intel_crtc *crtc;
> +
> +	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
> +					    new_crtc_state, i) {
> +		if (new_crtc_state->uapi.sharpness_strength !=
> +				old_crtc_state->uapi.sharpness_strength)
> +			return true;
> +	}
> +
> +	return false;
> +}
> +
> +void intel_sharpness_filter_enable(struct intel_crtc_state *crtc_state)
> +{
>  	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> +	struct intel_display *display = to_intel_display(crtc);

Put this first, use to_intel_display(crtc_state);

> +	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);

Unnecessary.

>  	int id = crtc_state->scaler_state.scaler_id;
> +	u32 sharpness_ctl;
> +	u8 val;
> +
> +	if (crtc_state->uapi.sharpness_strength == 0 ||
> +	    crtc_state->pch_pfit.enabled) {
> +		intel_sharpness_disable(crtc_state);
> +
> +		return;
> +	}
> +
> +	/*
> +	 * HW takes a value in form (1.0 + strength) in 4.4 fixed format.
> +	 * Strength is from 0.0-14.9375 ie from 0-239.
> +	 * User can give value from 0-255 but is clamped to 239.
> +	 * Ex. User gives 85 which is 5.3125 and adding 1.0 gives 6.3125.
> +	 * 6.3125 in 4.4 format is 01100101 which is equal to 101.
> +	 * Also 85 + 16 = 101.
> +	 */
> +	val = min(crtc_state->uapi.sharpness_strength, 0xEF) + 0x10;
> +
> +	drm_dbg(&dev_priv->drm, "Filter strength value: %d\n", val);

drm_dbg_kms(display->drm, ...)

> +
> +	sharpness_ctl =	FILTER_EN | FILTER_STRENGTH(val) |
> +		FILTER_SIZE(crtc_state->hw.casf_params.win_size);
> +
> +	intel_de_write(display, SHARPNESS_CTL(crtc->pipe),
> +		       sharpness_ctl);
>  
>  	intel_de_write_fw(display, GLK_PS_COEF_INDEX_SET(crtc->pipe, id, 0),
>  			  PS_COEF_INDEX_AUTO_INC);
> @@ -51,9 +128,24 @@ void intel_sharpness_filter_enable(struct intel_crtc_state *crtc_state)
>  
>  int intel_sharpness_filter_compute_config(struct intel_crtc_state *crtc_state)
>  {
> +	struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->uapi.crtc);
> +	struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);

Unnecessary. Add struct intel_display.

> +
> +	if (crtc_state->uapi.sharpness_strength == 0) {
> +		crtc_state->hw.casf_params.need_scaler = false;
> +		return 0;
> +	}
> +
> +	if (crtc_state->pch_pfit.enabled)
> +		return -EINVAL;
> +
>  	if (!crtc_state->pch_pfit.enabled)
>  		crtc_state->hw.casf_params.need_scaler = true;
>  
> +	intel_sharpness_filter_size_compute(crtc_state);
> +	drm_dbg(&dev_priv->drm, "Tap Size: %d\n",

drm_dbg_kms(display->drm, ...)

> +		crtc_state->hw.casf_params.win_size);
> +
>  	return 0;
>  }
>  
> @@ -114,3 +206,21 @@ void intel_sharpness_scaler_compute_config(struct intel_crtc_state *crtc_state)
>  		}
>  	}
>  }
> +
> +void intel_sharpness_disable(struct intel_crtc_state *crtc_state)
> +{
> +	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> +	struct intel_display *display = to_intel_display(crtc);

Put this first.

> +	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> +
> +	intel_de_write(display, SHARPNESS_CTL(crtc->pipe), 0);
> +	drm_dbg(&dev_priv->drm, "Filter strength value: %d\n", 0);

drm_dbg_kms(display->drm, ...)

> +}
> +
> +bool sharp_compute(struct intel_crtc_state *crtc_state)

Does not follow naming style. Basically for functions in intel_foo.[ch],
name the functions intel_foo_*().

> +{
> +	if (!(FILTER_EN & 1) && crtc_state->uapi.sharpness_strength != 0)
> +		return true;
> +
> +	return false;
> +}
> diff --git a/drivers/gpu/drm/i915/display/intel_sharpness_filter.h b/drivers/gpu/drm/i915/display/intel_sharpness_filter.h
> index 84f47d511cdc..85b2b8975383 100644
> --- a/drivers/gpu/drm/i915/display/intel_sharpness_filter.h
> +++ b/drivers/gpu/drm/i915/display/intel_sharpness_filter.h
> @@ -35,5 +35,10 @@ struct intel_sharpness_filter {
>  void intel_sharpness_filter_enable(struct intel_crtc_state *crtc_state);
>  void intel_sharpness_scaler_compute_config(struct intel_crtc_state *crtc_state);
>  int intel_sharpness_filter_compute_config(struct intel_crtc_state *crtc_state);
> +void intel_filter_lut_load(struct intel_crtc *crtc,
> +			   const struct intel_crtc_state *crtc_state);
> +bool intel_sharpness_strength_changed(struct intel_atomic_state *state);
> +void intel_sharpness_disable(struct intel_crtc_state *crtc_state);
> +bool sharp_compute(struct intel_crtc_state *crtc_state);

Naming. Maybe the files don't want to be named
intel_sharpness_filter.[ch] if you need differently named functions.

>  
>  #endif /* __INTEL_SHARPEN_FILTER_H__ */
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 84b05b57ad52..41c6c56d83d6 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -2396,6 +2396,23 @@
>  			_ID(id, _PS_COEF_SET0_DATA_1A, _PS_COEF_SET0_DATA_2A) + (set) * 8, \
>  			_ID(id, _PS_COEF_SET0_DATA_1B, _PS_COEF_SET0_DATA_2B) + (set) * 8)
>  
> +#define _SHARPNESS_CTL_A               0x682B0
> +#define SHARPNESS_CTL(trans)           _MMIO_PIPE2(dev_priv, trans, _SHARPNESS_CTL_A)
> +#define  FILTER_EN                      REG_BIT(31)
> +#define  FILTER_STRENGTH_MASK           REG_GENMASK(15, 8)
> +#define  FILTER_STRENGTH(x)             REG_FIELD_PREP(FILTER_STRENGTH_MASK, (x))
> +#define  FILTER_SIZE_MASK               REG_GENMASK(1, 0)
> +#define  FILTER_SIZE(x)                 REG_FIELD_PREP(FILTER_SIZE_MASK, (x))
> +
> +#define _SHRPLUT_DATA_A                        0x682B8
> +#define SHRPLUT_DATA(trans)            _MMIO_PIPE2(dev_priv, trans, _SHRPLUT_DATA_A)
> +
> +#define _SHRPLUT_INDEX_A               0x682B4
> +#define SHRPLUT_INDEX(trans)           _MMIO_PIPE2(dev_priv, trans, _SHRPLUT_INDEX_A)
> +#define  INDEX_AUTO_INCR               REG_BIT(10)
> +#define  INDEX_VALUE_MASK              REG_GENMASK(4, 0)
> +#define  INDEX_VALUE(x)                        REG_FIELD_PREP(INDEX_VALUE_MASK, (x))
> +

Please don't add any new display registers to i915_reg.h. Work is in
progress to separate the two, please don't make it harder.

BR,
Jani.

>  /* Display Internal Timeout Register */
>  #define RM_TIMEOUT		_MMIO(0x42060)
>  #define RM_TIMEOUT_REG_CAPTURE	_MMIO(0x420E0)

-- 
Jani Nikula, Intel



[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux