On 7/31/2024 5:17 AM, Thomas Zimmermann wrote:
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
Signed-off-by: Thomas Zimmermann <tzimmermann@xxxxxxx>
Cc: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
Cc: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
Reviewed-by: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
---
drivers/gpu/drm/panel/panel-orisetech-otm8009a.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
index 93183f30d7d6..a9b5dad70bc1 100644
--- a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
+++ b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
@@ -389,7 +389,7 @@ static int otm8009a_backlight_update_status(struct backlight_device *bd)
return -ENXIO;
}
- if (bd->props.power <= FB_BLANK_NORMAL) {
+ if (bd->props.power <= BACKLIGHT_POWER_REDUCED) {
/* Power on the backlight with the requested brightness
* Note We can not use mipi_dsi_dcs_set_display_brightness()
* as otm8009a driver support only 8-bit brightness (1 param).
@@ -465,7 +465,7 @@ static int otm8009a_probe(struct mipi_dsi_device *dsi)
ctx->bl_dev->props.max_brightness = OTM8009A_BACKLIGHT_MAX;
ctx->bl_dev->props.brightness = OTM8009A_BACKLIGHT_DEFAULT;
- ctx->bl_dev->props.power = FB_BLANK_POWERDOWN;
+ ctx->bl_dev->props.power = BACKLIGHT_POWER_OFF;
ctx->bl_dev->props.type = BACKLIGHT_RAW;
drm_panel_add(&ctx->panel);
--
2.45.2
