> -----Original Message-----
> From: Intel-gfx <intel-gfx-bounces@xxxxxxxxxxxxxxxxxxxxx> On Behalf Of Mitul
> Golani
> Sent: Thursday, July 25, 2024 6:28 PM
> To: intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> Cc: intel-xe@xxxxxxxxxxxxxxxxxxxxx
> Subject: [PATCH] drm/i915/bmg: Read display register timeout
>
> Log the address of the register that caused the timeout interrupt by reading
> RMTIMEOUTREG_CAPTURE
>
> Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/display/intel_display_irq.c | 7 ++++++-
> drivers/gpu/drm/i915/i915_reg.h | 2 ++
> 2 files changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display_irq.c
> b/drivers/gpu/drm/i915/display/intel_display_irq.c
> index 5219ba295c74..8e22f7ac3db0 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_irq.c
> +++ b/drivers/gpu/drm/i915/display/intel_display_irq.c
> @@ -905,6 +905,11 @@ gen8_de_misc_irq_handler(struct drm_i915_private
> *dev_priv, u32 iir)
>
> intel_pmdemand_irq_handler(dev_priv);
> found = true;
> + } else if (iir & GEN8_DE_RM_TIMEOUT) {
> + u32 val = intel_uncore_read(&dev_priv->uncore,
> + RMTIMEOUTREG_CAPTURE);
> + drm_warn(&dev_priv->drm, "Register Access Timeout =
> 0x%x\n", val);
> + found = true;
> }
> } else if (iir & GEN8_DE_MISC_GSE) {
> intel_opregion_asle_intr(dev_priv);
> @@ -1710,7 +1715,7 @@ void gen8_de_irq_postinstall(struct
> drm_i915_private *dev_priv)
>
> if (DISPLAY_VER(dev_priv) >= 14) {
> de_misc_masked |= XELPDP_PMDEMAND_RSPTOUT_ERR |
> - XELPDP_PMDEMAND_RSP;
> + XELPDP_PMDEMAND_RSP |
> GEN8_DE_RM_TIMEOUT;
Do you only want to log it for display_ver > = 14, I would expect it to be logged
Even for gen 8 so maybe this isn't the right place to OR it.
> } else if (DISPLAY_VER(dev_priv) >= 11) {
> enum port port;
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h
> b/drivers/gpu/drm/i915/i915_reg.h index 0e3d79227e3c..858ce8a5d929
> 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -2396,6 +2396,7 @@
>
> /* Display Internal Timeout Register */
> #define RM_TIMEOUT _MMIO(0x42060)
> +#define RMTIMEOUTREG_CAPTURE _MMIO(0x420E0)
Maybe RM_TIMEOUT_REG_CAPTURE seems cleaner.
Regards,
Suraj Kandpal
> #define MMIO_TIMEOUT_US(us) ((us) << 0)
>
> /* interrupts */
> @@ -2574,6 +2575,7 @@
> #define GEN8_DE_MISC_IMR _MMIO(0x44464) #define GEN8_DE_MISC_IIR
> _MMIO(0x44468) #define GEN8_DE_MISC_IER _MMIO(0x4446c)
> +#define GEN8_DE_RM_TIMEOUT REG_BIT(29)
> #define XELPDP_PMDEMAND_RSPTOUT_ERR REG_BIT(27)
> #define GEN8_DE_MISC_GSE REG_BIT(27)
> #define GEN8_DE_EDP_PSR REG_BIT(19)
> --
> 2.45.2
