On Tue, Jun 04, 2024 at 06:25:19PM +0300, Jani Nikula wrote:
> Avoid the implicit dev_priv local variable use, and pass dev_priv
> explicitly to the DPLL register macro.
>
> Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
(
even though it is a big series and overall it looks all right,
I will put one by one for 2 reasons:
- so I ensure I don't miss details and I know where I stopped
- so you can use dim b4 directly without extra rebase and adding my rv-b one by one...
)
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 21 ++++-----
> .../drm/i915/display/intel_display_power.c | 2 +-
> .../i915/display/intel_display_power_well.c | 6 +--
> drivers/gpu/drm/i915/display/intel_dpll.c | 45 ++++++++++---------
> drivers/gpu/drm/i915/display/intel_dvo.c | 5 ++-
> drivers/gpu/drm/i915/display/intel_pps.c | 2 +-
> drivers/gpu/drm/i915/i915_reg.h | 2 +-
> 7 files changed, 43 insertions(+), 40 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 7370acdd6b8b..42e2d884c98e 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -382,11 +382,11 @@ void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
> fallthrough;
> case PORT_B:
> port_mask = DPLL_PORTB_READY_MASK;
> - dpll_reg = DPLL(0);
> + dpll_reg = DPLL(dev_priv, 0);
> break;
> case PORT_C:
> port_mask = DPLL_PORTC_READY_MASK;
> - dpll_reg = DPLL(0);
> + dpll_reg = DPLL(dev_priv, 0);
> expected_mask <<= 4;
> break;
> case PORT_D:
> @@ -8212,11 +8212,12 @@ void i830_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe)
> * the P1/P2 dividers. Otherwise the DPLL will keep using the old
> * dividers, even though the register value does change.
> */
> - intel_de_write(dev_priv, DPLL(pipe), dpll & ~DPLL_VGA_MODE_DIS);
> - intel_de_write(dev_priv, DPLL(pipe), dpll);
> + intel_de_write(dev_priv, DPLL(dev_priv, pipe),
> + dpll & ~DPLL_VGA_MODE_DIS);
> + intel_de_write(dev_priv, DPLL(dev_priv, pipe), dpll);
>
> /* Wait for the clocks to stabilize. */
> - intel_de_posting_read(dev_priv, DPLL(pipe));
> + intel_de_posting_read(dev_priv, DPLL(dev_priv, pipe));
> udelay(150);
>
> /* The pixel multiplier can only be updated once the
> @@ -8224,12 +8225,12 @@ void i830_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe)
> *
> * So write it again.
> */
> - intel_de_write(dev_priv, DPLL(pipe), dpll);
> + intel_de_write(dev_priv, DPLL(dev_priv, pipe), dpll);
>
> /* We do this three times for luck */
> for (i = 0; i < 3 ; i++) {
> - intel_de_write(dev_priv, DPLL(pipe), dpll);
> - intel_de_posting_read(dev_priv, DPLL(pipe));
> + intel_de_write(dev_priv, DPLL(dev_priv, pipe), dpll);
> + intel_de_posting_read(dev_priv, DPLL(dev_priv, pipe));
> udelay(150); /* wait for warmup */
> }
>
> @@ -8262,8 +8263,8 @@ void i830_disable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe)
>
> intel_wait_for_pipe_scanline_stopped(crtc);
>
> - intel_de_write(dev_priv, DPLL(pipe), DPLL_VGA_MODE_DIS);
> - intel_de_posting_read(dev_priv, DPLL(pipe));
> + intel_de_write(dev_priv, DPLL(dev_priv, pipe), DPLL_VGA_MODE_DIS);
> + intel_de_posting_read(dev_priv, DPLL(dev_priv, pipe));
> }
>
> void intel_hpd_poll_fini(struct drm_i915_private *i915)
> diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c
> index 34b6d843bc9e..3c5cb587f9bd 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_power.c
> +++ b/drivers/gpu/drm/i915/display/intel_display_power.c
> @@ -1772,7 +1772,7 @@ static void chv_phy_control_init(struct drm_i915_private *dev_priv)
> * current lane status.
> */
> if (intel_power_well_is_enabled(dev_priv, cmn_bc)) {
> - u32 status = intel_de_read(dev_priv, DPLL(PIPE_A));
> + u32 status = intel_de_read(dev_priv, DPLL(dev_priv, PIPE_A));
> unsigned int mask;
>
> mask = status & DPLL_PORTB_READY_MASK;
> diff --git a/drivers/gpu/drm/i915/display/intel_display_power_well.c b/drivers/gpu/drm/i915/display/intel_display_power_well.c
> index 83f616097a29..3b6cb237d80a 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_power_well.c
> +++ b/drivers/gpu/drm/i915/display/intel_display_power_well.c
> @@ -1196,13 +1196,13 @@ static void vlv_display_power_well_init(struct drm_i915_private *dev_priv)
> * CHV DPLL B/C have some issues if VGA mode is enabled.
> */
> for_each_pipe(dev_priv, pipe) {
> - u32 val = intel_de_read(dev_priv, DPLL(pipe));
> + u32 val = intel_de_read(dev_priv, DPLL(dev_priv, pipe));
>
> val |= DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
> if (pipe != PIPE_A)
> val |= DPLL_INTEGRATED_CRI_CLK_VLV;
>
> - intel_de_write(dev_priv, DPLL(pipe), val);
> + intel_de_write(dev_priv, DPLL(dev_priv, pipe), val);
> }
>
> vlv_init_display_clock_gating(dev_priv);
> @@ -1355,7 +1355,7 @@ static void assert_chv_phy_status(struct drm_i915_private *dev_priv)
> */
> if (BITS_SET(phy_control,
> PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH1)) &&
> - (intel_de_read(dev_priv, DPLL(PIPE_B)) & DPLL_VCO_ENABLE) == 0)
> + (intel_de_read(dev_priv, DPLL(dev_priv, PIPE_B)) & DPLL_VCO_ENABLE) == 0)
> phy_status |= PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH1);
>
> if (BITS_SET(phy_control,
> diff --git a/drivers/gpu/drm/i915/display/intel_dpll.c b/drivers/gpu/drm/i915/display/intel_dpll.c
> index a981f45facb3..a007ca5208b8 100644
> --- a/drivers/gpu/drm/i915/display/intel_dpll.c
> +++ b/drivers/gpu/drm/i915/display/intel_dpll.c
> @@ -403,7 +403,7 @@ void i9xx_dpll_get_hw_state(struct intel_crtc *crtc,
> hw_state->dpll_md = tmp;
> }
>
> - hw_state->dpll = intel_de_read(dev_priv, DPLL(crtc->pipe));
> + hw_state->dpll = intel_de_read(dev_priv, DPLL(dev_priv, crtc->pipe));
>
> if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv)) {
> hw_state->fp0 = intel_de_read(dev_priv, FP0(crtc->pipe));
> @@ -1842,11 +1842,12 @@ void i9xx_enable_pll(const struct intel_crtc_state *crtc_state)
> * the P1/P2 dividers. Otherwise the DPLL will keep using the old
> * dividers, even though the register value does change.
> */
> - intel_de_write(dev_priv, DPLL(pipe), hw_state->dpll & ~DPLL_VGA_MODE_DIS);
> - intel_de_write(dev_priv, DPLL(pipe), hw_state->dpll);
> + intel_de_write(dev_priv, DPLL(dev_priv, pipe),
> + hw_state->dpll & ~DPLL_VGA_MODE_DIS);
> + intel_de_write(dev_priv, DPLL(dev_priv, pipe), hw_state->dpll);
>
> /* Wait for the clocks to stabilize. */
> - intel_de_posting_read(dev_priv, DPLL(pipe));
> + intel_de_posting_read(dev_priv, DPLL(dev_priv, pipe));
> udelay(150);
>
> if (DISPLAY_VER(dev_priv) >= 4) {
> @@ -1857,13 +1858,13 @@ void i9xx_enable_pll(const struct intel_crtc_state *crtc_state)
> *
> * So write it again.
> */
> - intel_de_write(dev_priv, DPLL(pipe), hw_state->dpll);
> + intel_de_write(dev_priv, DPLL(dev_priv, pipe), hw_state->dpll);
> }
>
> /* We do this three times for luck */
> for (i = 0; i < 3; i++) {
> - intel_de_write(dev_priv, DPLL(pipe), hw_state->dpll);
> - intel_de_posting_read(dev_priv, DPLL(pipe));
> + intel_de_write(dev_priv, DPLL(dev_priv, pipe), hw_state->dpll);
> + intel_de_posting_read(dev_priv, DPLL(dev_priv, pipe));
> udelay(150); /* wait for warmup */
> }
> }
> @@ -1991,11 +1992,11 @@ static void _vlv_enable_pll(const struct intel_crtc_state *crtc_state)
> const struct i9xx_dpll_hw_state *hw_state = &crtc_state->dpll_hw_state.i9xx;
> enum pipe pipe = crtc->pipe;
>
> - intel_de_write(dev_priv, DPLL(pipe), hw_state->dpll);
> - intel_de_posting_read(dev_priv, DPLL(pipe));
> + intel_de_write(dev_priv, DPLL(dev_priv, pipe), hw_state->dpll);
> + intel_de_posting_read(dev_priv, DPLL(dev_priv, pipe));
> udelay(150);
>
> - if (intel_de_wait_for_set(dev_priv, DPLL(pipe), DPLL_LOCK_VLV, 1))
> + if (intel_de_wait_for_set(dev_priv, DPLL(dev_priv, pipe), DPLL_LOCK_VLV, 1))
> drm_err(&dev_priv->drm, "DPLL %d failed to lock\n", pipe);
> }
>
> @@ -2012,7 +2013,7 @@ void vlv_enable_pll(const struct intel_crtc_state *crtc_state)
> assert_pps_unlocked(dev_priv, pipe);
>
> /* Enable Refclk */
> - intel_de_write(dev_priv, DPLL(pipe),
> + intel_de_write(dev_priv, DPLL(dev_priv, pipe),
> hw_state->dpll & ~(DPLL_VCO_ENABLE | DPLL_EXT_BUFFER_ENABLE_VLV));
>
> if (hw_state->dpll & DPLL_VCO_ENABLE) {
> @@ -2138,10 +2139,10 @@ static void _chv_enable_pll(const struct intel_crtc_state *crtc_state)
> udelay(1);
>
> /* Enable PLL */
> - intel_de_write(dev_priv, DPLL(pipe), hw_state->dpll);
> + intel_de_write(dev_priv, DPLL(dev_priv, pipe), hw_state->dpll);
>
> /* Check PLL is locked */
> - if (intel_de_wait_for_set(dev_priv, DPLL(pipe), DPLL_LOCK_VLV, 1))
> + if (intel_de_wait_for_set(dev_priv, DPLL(dev_priv, pipe), DPLL_LOCK_VLV, 1))
> drm_err(&dev_priv->drm, "PLL %d failed to lock\n", pipe);
> }
>
> @@ -2158,7 +2159,7 @@ void chv_enable_pll(const struct intel_crtc_state *crtc_state)
> assert_pps_unlocked(dev_priv, pipe);
>
> /* Enable Refclk and SSC */
> - intel_de_write(dev_priv, DPLL(pipe),
> + intel_de_write(dev_priv, DPLL(dev_priv, pipe),
> hw_state->dpll & ~DPLL_VCO_ENABLE);
>
> if (hw_state->dpll & DPLL_VCO_ENABLE) {
> @@ -2183,7 +2184,7 @@ void chv_enable_pll(const struct intel_crtc_state *crtc_state)
> * We should always have it disabled.
> */
> drm_WARN_ON(&dev_priv->drm,
> - (intel_de_read(dev_priv, DPLL(PIPE_B)) &
> + (intel_de_read(dev_priv, DPLL(dev_priv, PIPE_B)) &
> DPLL_VGA_MODE_DIS) == 0);
> } else {
> intel_de_write(dev_priv, DPLL_MD(pipe), hw_state->dpll_md);
> @@ -2241,8 +2242,8 @@ void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
> if (pipe != PIPE_A)
> val |= DPLL_INTEGRATED_CRI_CLK_VLV;
>
> - intel_de_write(dev_priv, DPLL(pipe), val);
> - intel_de_posting_read(dev_priv, DPLL(pipe));
> + intel_de_write(dev_priv, DPLL(dev_priv, pipe), val);
> + intel_de_posting_read(dev_priv, DPLL(dev_priv, pipe));
> }
>
> void chv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
> @@ -2259,8 +2260,8 @@ void chv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
> if (pipe != PIPE_A)
> val |= DPLL_INTEGRATED_CRI_CLK_VLV;
>
> - intel_de_write(dev_priv, DPLL(pipe), val);
> - intel_de_posting_read(dev_priv, DPLL(pipe));
> + intel_de_write(dev_priv, DPLL(dev_priv, pipe), val);
> + intel_de_posting_read(dev_priv, DPLL(dev_priv, pipe));
>
> vlv_dpio_get(dev_priv);
>
> @@ -2285,8 +2286,8 @@ void i9xx_disable_pll(const struct intel_crtc_state *crtc_state)
> /* Make sure the pipe isn't still relying on us */
> assert_transcoder_disabled(dev_priv, crtc_state->cpu_transcoder);
>
> - intel_de_write(dev_priv, DPLL(pipe), DPLL_VGA_MODE_DIS);
> - intel_de_posting_read(dev_priv, DPLL(pipe));
> + intel_de_write(dev_priv, DPLL(dev_priv, pipe), DPLL_VGA_MODE_DIS);
> + intel_de_posting_read(dev_priv, DPLL(dev_priv, pipe));
> }
>
>
> @@ -2312,7 +2313,7 @@ static void assert_pll(struct drm_i915_private *dev_priv,
> {
> bool cur_state;
>
> - cur_state = intel_de_read(dev_priv, DPLL(pipe)) & DPLL_VCO_ENABLE;
> + cur_state = intel_de_read(dev_priv, DPLL(dev_priv, pipe)) & DPLL_VCO_ENABLE;
> I915_STATE_WARN(dev_priv, cur_state != state,
> "PLL state assertion failure (expected %s, current %s)\n",
> str_on_off(state), str_on_off(cur_state));
> diff --git a/drivers/gpu/drm/i915/display/intel_dvo.c b/drivers/gpu/drm/i915/display/intel_dvo.c
> index 1840f5b59229..091824334f26 100644
> --- a/drivers/gpu/drm/i915/display/intel_dvo.c
> +++ b/drivers/gpu/drm/i915/display/intel_dvo.c
> @@ -456,13 +456,14 @@ static bool intel_dvo_init_dev(struct drm_i915_private *dev_priv,
> * the device.
> */
> for_each_pipe(dev_priv, pipe)
> - dpll[pipe] = intel_de_rmw(dev_priv, DPLL(pipe), 0, DPLL_DVO_2X_MODE);
> + dpll[pipe] = intel_de_rmw(dev_priv, DPLL(dev_priv, pipe), 0,
> + DPLL_DVO_2X_MODE);
>
> ret = dvo->dev_ops->init(&intel_dvo->dev, i2c);
>
> /* restore the DVO 2x clock state to original */
> for_each_pipe(dev_priv, pipe) {
> - intel_de_write(dev_priv, DPLL(pipe), dpll[pipe]);
> + intel_de_write(dev_priv, DPLL(dev_priv, pipe), dpll[pipe]);
> }
>
> intel_gmbus_force_bit(i2c, false);
> diff --git a/drivers/gpu/drm/i915/display/intel_pps.c b/drivers/gpu/drm/i915/display/intel_pps.c
> index 73046ef58d8e..42306bc4ba86 100644
> --- a/drivers/gpu/drm/i915/display/intel_pps.c
> +++ b/drivers/gpu/drm/i915/display/intel_pps.c
> @@ -119,7 +119,7 @@ vlv_power_sequencer_kick(struct intel_dp *intel_dp)
> else
> DP |= DP_PIPE_SEL(pipe);
>
> - pll_enabled = intel_de_read(dev_priv, DPLL(pipe)) & DPLL_VCO_ENABLE;
> + pll_enabled = intel_de_read(dev_priv, DPLL(dev_priv, pipe)) & DPLL_VCO_ENABLE;
>
> /*
> * The DPLL for the pipe must be enabled for this to work.
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 6877e2f0fbc3..8ff04bb19cbe 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -668,7 +668,7 @@
> #define _DPLL_A 0x6014
> #define _DPLL_B 0x6018
> #define _CHV_DPLL_C 0x6030
> -#define DPLL(pipe) _MMIO_BASE_PIPE3(DISPLAY_MMIO_BASE(dev_priv), \
> +#define DPLL(dev_priv, pipe) _MMIO_BASE_PIPE3(DISPLAY_MMIO_BASE(dev_priv), \
> (pipe), _DPLL_A, _DPLL_B, _CHV_DPLL_C)
>
> #define VGA0 _MMIO(0x6000)
> --
> 2.39.2
>
