[PATCH v2 09/12] media: cx23885: Make I2C terminology more inclusive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I2C v7, SMBus 3.2, and I3C 1.1.1 specifications have replaced "master/slave"
with more appropriate terms. Inspired by and following on to Wolfram's
series to fix drivers/i2c/[1], fix the terminology for users of
I2C_ALGOBIT bitbanging interface, now that the approved verbiage exists
in the specification.

Compile tested, no functionality changes intended

[1]: https://lore.kernel.org/all/20240322132619.6389-1-wsa+renesas@xxxxxxxxxxxxxxxxxxxx/

Signed-off-by: Easwar Hariharan <eahariha@xxxxxxxxxxxxxxxxxxx>
---
 drivers/media/pci/cx23885/cx23885-core.c | 6 +++---
 drivers/media/pci/cx23885/cx23885-f300.c | 8 ++++----
 drivers/media/pci/cx23885/cx23885-i2c.c  | 6 +++---
 drivers/media/pci/cx23885/cx23885.h      | 2 +-
 4 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/media/pci/cx23885/cx23885-core.c b/drivers/media/pci/cx23885/cx23885-core.c
index c8705d786cdd..0adbdf529cec 100644
--- a/drivers/media/pci/cx23885/cx23885-core.c
+++ b/drivers/media/pci/cx23885/cx23885-core.c
@@ -942,7 +942,7 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
 	dev->pci_slot = PCI_SLOT(dev->pci->devfn);
 	cx23885_irq_add(dev, 0x001f00);
 
-	/* External Master 1 Bus */
+	/* External Controller 1 Bus */
 	dev->i2c_bus[0].nr = 0;
 	dev->i2c_bus[0].dev = dev;
 	dev->i2c_bus[0].reg_stat  = I2C1_STAT;
@@ -952,7 +952,7 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
 	dev->i2c_bus[0].reg_wdata = I2C1_WDATA;
 	dev->i2c_bus[0].i2c_period = (0x9d << 24); /* 100kHz */
 
-	/* External Master 2 Bus */
+	/* External Controller 2 Bus */
 	dev->i2c_bus[1].nr = 1;
 	dev->i2c_bus[1].dev = dev;
 	dev->i2c_bus[1].reg_stat  = I2C2_STAT;
@@ -962,7 +962,7 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
 	dev->i2c_bus[1].reg_wdata = I2C2_WDATA;
 	dev->i2c_bus[1].i2c_period = (0x9d << 24); /* 100kHz */
 
-	/* Internal Master 3 Bus */
+	/* Internal Controller 3 Bus */
 	dev->i2c_bus[2].nr = 2;
 	dev->i2c_bus[2].dev = dev;
 	dev->i2c_bus[2].reg_stat  = I2C3_STAT;
diff --git a/drivers/media/pci/cx23885/cx23885-f300.c b/drivers/media/pci/cx23885/cx23885-f300.c
index ac1c434e8e24..2ef7454e0f61 100644
--- a/drivers/media/pci/cx23885/cx23885-f300.c
+++ b/drivers/media/pci/cx23885/cx23885-f300.c
@@ -92,7 +92,7 @@ static u8 f300_xfer(struct dvb_frontend *fe, u8 *buf)
 	f300_set_line(dev, F300_RESET, 0);/* begin to send data */
 	msleep(1);
 
-	f300_send_byte(dev, 0xe0);/* the slave address is 0xe0, write */
+	f300_send_byte(dev, 0xe0);/* the target address is 0xe0, write */
 	msleep(1);
 
 	temp = buf[0];
@@ -112,10 +112,10 @@ static u8 f300_xfer(struct dvb_frontend *fe, u8 *buf)
 	}
 
 	if (i > 7) {
-		pr_err("%s: timeout, the slave no response\n",
+		pr_err("%s: timeout, the target no response\n",
 								__func__);
-		ret = 1; /* timeout, the slave no response */
-	} else { /* the slave not busy, prepare for getting data */
+		ret = 1; /* timeout, the target no response */
+	} else { /* the target not busy, prepare for getting data */
 		f300_set_line(dev, F300_RESET, 0);/*ready...*/
 		msleep(1);
 		f300_send_byte(dev, 0xe1);/* 0xe1 is Read */
diff --git a/drivers/media/pci/cx23885/cx23885-i2c.c b/drivers/media/pci/cx23885/cx23885-i2c.c
index f51fad33dc04..ddafeccb2b0a 100644
--- a/drivers/media/pci/cx23885/cx23885-i2c.c
+++ b/drivers/media/pci/cx23885/cx23885-i2c.c
@@ -34,7 +34,7 @@ MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time");
 #define I2C_EXTEND  (1 << 3)
 #define I2C_NOSTOP  (1 << 4)
 
-static inline int i2c_slave_did_ack(struct i2c_adapter *i2c_adap)
+static inline int i2c_target_did_ack(struct i2c_adapter *i2c_adap)
 {
 	struct cx23885_i2c *bus = i2c_adap->algo_data;
 	struct cx23885_dev *dev = bus->dev;
@@ -84,7 +84,7 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap,
 		cx_write(bus->reg_ctrl, bus->i2c_period | (1 << 2));
 		if (!i2c_wait_done(i2c_adap))
 			return -EIO;
-		if (!i2c_slave_did_ack(i2c_adap))
+		if (!i2c_target_did_ack(i2c_adap))
 			return -ENXIO;
 
 		dprintk(1, "%s() returns 0\n", __func__);
@@ -163,7 +163,7 @@ static int i2c_readbytes(struct i2c_adapter *i2c_adap,
 		cx_write(bus->reg_ctrl, bus->i2c_period | (1 << 2) | 1);
 		if (!i2c_wait_done(i2c_adap))
 			return -EIO;
-		if (!i2c_slave_did_ack(i2c_adap))
+		if (!i2c_target_did_ack(i2c_adap))
 			return -ENXIO;
 
 
diff --git a/drivers/media/pci/cx23885/cx23885.h b/drivers/media/pci/cx23885/cx23885.h
index 349462ee2c48..c2d7a95933d5 100644
--- a/drivers/media/pci/cx23885/cx23885.h
+++ b/drivers/media/pci/cx23885/cx23885.h
@@ -368,7 +368,7 @@ struct cx23885_dev {
 	 * AV core so we see nice clean and stable video and audio. */
 	u32                        clk_freq;
 
-	/* I2C adapters: Master 1 & 2 (External) & Master 3 (Internal only) */
+	/* I2C adapters: Controller 1 & 2 (External) & Controller 3 (Internal only) */
 	struct cx23885_i2c         i2c_bus[3];
 
 	int                        nr;
-- 
2.34.1




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux