[PATCH v2 4/5] drm/i915: Eliminate extra frame from skl-glk sync->async flip change

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>

On bdw-glk the sync->async flip change takes an extra frame due to
the double buffering behaviour of the async flip plane control bit.

Since on skl+ we are now explicitly converting the first async flip
to a sync flip (in order to allow changing the modifier and/or
ddb/watermarks) we are now taking two extra frames until async flips
are actually active. We can drop that back down to one frame by
setting the async flip bit already during the sync flip.

Note that on bdw we don't currently do the extra sync flip (see
intel_plane_do_async_flip()) so technically we wouldn't have
to deal with this in i9xx_plane_update_arm(). But I added the
relevant snippet of code there as well, just in case we ever
decide to go for the extra sync flip on pre-skl platforms as
well (we might, for example, want to change the fb stride).

Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/i915/display/i9xx_plane.c         |  5 +++++
 drivers/gpu/drm/i915/display/intel_atomic_plane.c | 15 +++++++++++----
 .../gpu/drm/i915/display/skl_universal_plane.c    |  5 +++++
 3 files changed, 21 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/i9xx_plane.c b/drivers/gpu/drm/i915/display/i9xx_plane.c
index 0279c8aabdd1..76fc7626051b 100644
--- a/drivers/gpu/drm/i915/display/i9xx_plane.c
+++ b/drivers/gpu/drm/i915/display/i9xx_plane.c
@@ -455,6 +455,11 @@ static void i9xx_plane_update_arm(struct intel_plane *plane,
 
 	dspcntr = plane_state->ctl | i9xx_plane_ctl_crtc(crtc_state);
 
+	/* see intel_plane_atomic_calc_changes() */
+	if (plane->need_async_flip_disable_wa &&
+	    crtc_state->async_flip_planes & BIT(plane->id))
+		dspcntr |= DISP_ASYNC_FLIP;
+
 	linear_offset = intel_fb_xy_to_linear(x, y, plane_state, 0);
 
 	if (DISPLAY_VER(dev_priv) >= 4)
diff --git a/drivers/gpu/drm/i915/display/intel_atomic_plane.c b/drivers/gpu/drm/i915/display/intel_atomic_plane.c
index 769010d0ebc4..7098a34a17c8 100644
--- a/drivers/gpu/drm/i915/display/intel_atomic_plane.c
+++ b/drivers/gpu/drm/i915/display/intel_atomic_plane.c
@@ -437,10 +437,6 @@ static bool intel_plane_do_async_flip(struct intel_plane *plane,
 	 * only X-tile is supported with async flips, though we could
 	 * extend this so other scanout parameters (stride/etc) could
 	 * be changed as well...
-	 *
-	 * FIXME: Platforms with need_async_flip_disable_wa==true will
-	 * now end up doing two sync flips initially. Would be nice to
-	 * combine those into just the one sync flip...
 	 */
 	return DISPLAY_VER(i915) < 9 || old_crtc_state->uapi.async_flip;
 }
@@ -604,6 +600,17 @@ static int intel_plane_atomic_calc_changes(const struct intel_crtc_state *old_cr
 	if (intel_plane_do_async_flip(plane, old_crtc_state, new_crtc_state)) {
 		new_crtc_state->do_async_flip = true;
 		new_crtc_state->async_flip_planes |= BIT(plane->id);
+	} else if (plane->need_async_flip_disable_wa &&
+		   new_crtc_state->uapi.async_flip) {
+		/*
+		 * On platforms with double buffered async flip bit we
+		 * set the bit already one frame early during the sync
+		 * flip (see {i9xx,skl}_plane_update_arm()). The
+		 * hardware will therefore be ready to perform a real
+		 * async flip during the next commit, without having
+		 * to wait yet another frame for the bit to latch.
+		 */
+		new_crtc_state->async_flip_planes |= BIT(plane->id);
 	}
 
 	return 0;
diff --git a/drivers/gpu/drm/i915/display/skl_universal_plane.c b/drivers/gpu/drm/i915/display/skl_universal_plane.c
index 860574d04f88..ad4c90344f68 100644
--- a/drivers/gpu/drm/i915/display/skl_universal_plane.c
+++ b/drivers/gpu/drm/i915/display/skl_universal_plane.c
@@ -1174,6 +1174,11 @@ skl_plane_update_arm(struct intel_plane *plane,
 	plane_ctl = plane_state->ctl |
 		skl_plane_ctl_crtc(crtc_state);
 
+	/* see intel_plane_atomic_calc_changes() */
+	if (plane->need_async_flip_disable_wa &&
+	    crtc_state->async_flip_planes & BIT(plane->id))
+		plane_ctl |= PLANE_CTL_ASYNC_FLIP;
+
 	if (DISPLAY_VER(dev_priv) >= 10)
 		plane_color_ctl = plane_state->color_ctl |
 			glk_plane_color_ctl_crtc(crtc_state);
-- 
2.43.2




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux