Compute Fixed Average Vtotal/CMRR with resepect to
userspace VRR enablement. Also calculate required
parameters in case of CMRR is enabled. During
intel_vrr_compute_config, CMRR is getting enabled
based on userspace has enabled Adaptive Sync Vtotal
mode (Legacy VRR) or not.
--v2:
- Update is_cmrr_frac_required function return as bool, not int. [Jani]
- Use signed int math instead of unsigned in cmrr_get_vtotal2. [Jani]
- Fix typo and usage of camel case in cmrr_get_vtotal. [Jani]
- Use do_div in cmrr_get_vtotalwhile calculating cmrr_m. [ Jani]
- Simplify cmrr and vrr compute config in intel_vrr_compute_config. [Jani]
- Correct valiable name usage in is_cmrr_frac_required. [Ville]
--v3:
- Removing RFC tag.
--v4:
- Added edp check to address edp usecase for now. (ville)
- Updated is_cmrr_fraction_required to more simplified calculation.
- on longterm goal to be worked upon uapi as suggestion from ville.
--v5:
- Correct vtotal paramas accuracy and add 2 digit precision.
- Avoid using DIV_ROUND_UP and improve scanline precision.
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@xxxxxxxxx>
---
drivers/gpu/drm/i915/display/intel_display.c | 1 +
.../drm/i915/display/intel_display_device.h | 1 +
drivers/gpu/drm/i915/display/intel_vrr.c | 97 ++++++++++++++++---
3 files changed, 87 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 78d7d2505c15..15b9c5815c34 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -5474,6 +5474,7 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,
PIPE_CONF_CHECK_I(vrr.vsync_end);
PIPE_CONF_CHECK_LLI(cmrr.cmrr_m);
PIPE_CONF_CHECK_LLI(cmrr.cmrr_n);
+ PIPE_CONF_CHECK_BOOL(cmrr.enable);
}
#undef PIPE_CONF_CHECK_X
diff --git a/drivers/gpu/drm/i915/display/intel_display_device.h b/drivers/gpu/drm/i915/display/intel_display_device.h
index 66b51de86e38..97d9ccd169ae 100644
--- a/drivers/gpu/drm/i915/display/intel_display_device.h
+++ b/drivers/gpu/drm/i915/display/intel_display_device.h
@@ -70,6 +70,7 @@ struct drm_printer;
BIT(trans)) != 0)
#define HAS_VRR(i915) (DISPLAY_VER(i915) >= 11)
#define HAS_AS_SDP(i915) (DISPLAY_VER(i915) >= 13)
+#define HAS_CMRR(i915) (DISPLAY_VER(i915) >= 20)
#define INTEL_NUM_PIPES(i915) (hweight8(DISPLAY_RUNTIME_INFO(i915)->pipe_mask))
#define I915_HAS_HOTPLUG(i915) (DISPLAY_INFO(i915)->has_hotplug)
#define OVERLAY_NEEDS_PHYSICAL(i915) (DISPLAY_INFO(i915)->overlay_needs_physical)
diff --git a/drivers/gpu/drm/i915/display/intel_vrr.c b/drivers/gpu/drm/i915/display/intel_vrr.c
index 369769e46c8d..546a689dd4fb 100644
--- a/drivers/gpu/drm/i915/display/intel_vrr.c
+++ b/drivers/gpu/drm/i915/display/intel_vrr.c
@@ -11,6 +11,9 @@
#include "intel_vrr.h"
#include "intel_dp.h"
+#define FIXED_POINT_PRECISION 100
+#define CMRR_PRECISION_TOLERANCE 10
+
bool intel_vrr_is_capable(struct intel_connector *connector)
{
const struct drm_display_info *info = &connector->base.display_info;
@@ -106,6 +109,57 @@ int intel_vrr_vmax_vblank_start(const struct intel_crtc_state *crtc_state)
return crtc_state->vrr.vmax - intel_vrr_vblank_exit_length(crtc_state);
}
+static bool
+is_cmrr_frac_required(struct intel_crtc_state *crtc_state)
+{
+ int calculated_refresh_k, actual_refresh_k, pixel_clock_per_line;
+ struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode;
+
+ actual_refresh_k =
+ drm_mode_vrefresh(adjusted_mode) * FIXED_POINT_PRECISION;
+ pixel_clock_per_line =
+ adjusted_mode->crtc_clock * 1000 / adjusted_mode->crtc_htotal;
+ calculated_refresh_k =
+ pixel_clock_per_line * FIXED_POINT_PRECISION / adjusted_mode->crtc_vtotal;
+
+ if ((actual_refresh_k - calculated_refresh_k) < CMRR_PRECISION_TOLERANCE)
+ return false;
+
+ return true;
+}
+
+static unsigned int
+cmrr_get_vtotal(struct intel_crtc_state *crtc_state)
+{
+ int multiplier_m = 1, multiplier_n = 1, vtotal;
+ int actual_refresh_rate, desired_refresh_rate;
+ long long actual_pixel_rate, adjusted_pixel_rate, pixel_clock_per_line;
+ struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode;
+
+ pixel_clock_per_line =
+ adjusted_mode->crtc_clock * 1000 / adjusted_mode->crtc_htotal;
+ actual_refresh_rate =
+ pixel_clock_per_line * FIXED_POINT_PRECISION / adjusted_mode->crtc_vtotal;
+ desired_refresh_rate = drm_mode_vrefresh(adjusted_mode);
+ actual_pixel_rate = actual_refresh_rate * adjusted_mode->crtc_vtotal;
+ actual_pixel_rate =
+ (actual_pixel_rate * adjusted_mode->crtc_htotal) / FIXED_POINT_PRECISION;
+
+ if (is_cmrr_frac_required(crtc_state)) {
+ multiplier_m = 1001;
+ multiplier_n = 1000;
+ }
+
+ crtc_state->cmrr.cmrr_n =
+ ((desired_refresh_rate * adjusted_mode->crtc_htotal * multiplier_n) / multiplier_m);
+ crtc_state->cmrr.cmrr_n *= multiplier_n;
+ vtotal = (actual_pixel_rate * multiplier_n) / crtc_state->cmrr.cmrr_n;
+ adjusted_pixel_rate = actual_pixel_rate * multiplier_m;
+ crtc_state->cmrr.cmrr_m = do_div(adjusted_pixel_rate, crtc_state->cmrr.cmrr_n);
+
+ return vtotal;
+}
+
void
intel_vrr_compute_config(struct intel_crtc_state *crtc_state,
struct drm_connector_state *conn_state)
@@ -115,6 +169,7 @@ intel_vrr_compute_config(struct intel_crtc_state *crtc_state,
struct intel_connector *connector =
to_intel_connector(conn_state->connector);
struct intel_dp *intel_dp = intel_attached_dp(connector);
+ bool is_edp = intel_dp_is_edp(intel_dp);
struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode;
const struct drm_display_info *info = &connector->base.display_info;
int vmin, vmax;
@@ -159,18 +214,10 @@ intel_vrr_compute_config(struct intel_crtc_state *crtc_state,
crtc_state->vrr.flipline = crtc_state->vrr.vmin + 1;
/*
- * For XE_LPD+, we use guardband and pipeline override
- * is deprecated.
+ * When panel is VRR capable and userspace has
+ * not enabled adaptive sync mode then Fixed Average
+ * Vtotal mode should be enabled.
*/
- if (DISPLAY_VER(i915) >= 13) {
- crtc_state->vrr.guardband =
- crtc_state->vrr.vmin + 1 - adjusted_mode->crtc_vblank_start;
- } else {
- crtc_state->vrr.pipeline_full =
- min(255, crtc_state->vrr.vmin - adjusted_mode->crtc_vblank_start -
- crtc_state->framestart_delay - 1);
- }
-
if (crtc_state->uapi.vrr_enabled) {
crtc_state->vrr.enable = true;
crtc_state->mode_flags |= I915_MODE_FLAG_VRR;
@@ -182,6 +229,25 @@ intel_vrr_compute_config(struct intel_crtc_state *crtc_state,
(crtc_state->hw.adjusted_mode.crtc_vtotal -
crtc_state->hw.adjusted_mode.vsync_end);
}
+ } else if (HAS_CMRR(i915) && is_edp) {
+ crtc_state->cmrr.enable = true;
+ crtc_state->vrr.vmax = cmrr_get_vtotal(crtc_state);
+ crtc_state->vrr.vmin = crtc_state->vrr.vmax;
+ crtc_state->vrr.flipline = crtc_state->vrr.vmin;
+ crtc_state->mode_flags |= I915_MODE_FLAG_VRR;
+ }
+
+ /*
+ * For XE_LPD+, we use guardband and pipeline override
+ * is deprecated.
+ */
+ if (DISPLAY_VER(i915) >= 13) {
+ crtc_state->vrr.guardband =
+ crtc_state->vrr.vmin + 1 - adjusted_mode->crtc_vblank_start;
+ } else {
+ crtc_state->vrr.pipeline_full =
+ min(255, crtc_state->vrr.vmin - adjusted_mode->crtc_vblank_start -
+ crtc_state->framestart_delay - 1);
}
}
@@ -317,7 +383,14 @@ void intel_vrr_get_config(struct intel_crtc_state *crtc_state)
trans_vrr_ctl = intel_de_read(dev_priv, TRANS_VRR_CTL(cpu_transcoder));
- crtc_state->vrr.enable = trans_vrr_ctl & VRR_CTL_VRR_ENABLE;
+ if (HAS_CMRR(dev_priv)) {
+ crtc_state->cmrr.enable = (trans_vrr_ctl & VRR_CTL_CMRR_ENABLE) &&
+ (trans_vrr_ctl & VRR_CTL_VRR_ENABLE);
+ crtc_state->vrr.enable = trans_vrr_ctl & VRR_CTL_VRR_ENABLE &&
+ !(trans_vrr_ctl & VRR_CTL_CMRR_ENABLE);
+ } else {
+ crtc_state->vrr.enable = trans_vrr_ctl & VRR_CTL_VRR_ENABLE;
+ }
if (crtc_state->cmrr.enable) {
crtc_state->cmrr.cmrr_n =
--
2.25.1
