On 3/21/2024 1:41 AM, Imre Deak wrote:
The DPCD OUI of the logical port on a Dell UHBR monitor - on which the
AUX device is used to enable DSC - is all 0. To detect if the HBLANK
expansion quirk is required for this monitor use the OUI of the port's
parent instead.
Since in the above case the DPCD of both the logical port and the parent
port reports being a sink device (vs. branch device) type, read the
proper sink/branch OUI based on the DPCD device type.
This is required by a follow-up patch enabling the quirk for the above
Dell monitor.
Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
---
drivers/gpu/drm/i915/display/intel_dp_mst.c | 22 +++++++++++++++------
1 file changed, 16 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
index 516b00f791420..76a8fb21b8e52 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
@@ -1512,23 +1512,33 @@ intel_dp_mst_read_decompression_port_dsc_caps(struct intel_dp *intel_dp,
static bool detect_dsc_hblank_expansion_quirk(const struct intel_connector *connector)
{
struct drm_i915_private *i915 = to_i915(connector->base.dev);
+ struct drm_dp_aux *aux = connector->dp.dsc_decompression_aux;
struct drm_dp_desc desc;
u8 dpcd[DP_RECEIVER_CAP_SIZE];
- if (!connector->dp.dsc_decompression_aux)
+ if (!aux)
return false;
- if (drm_dp_read_desc(connector->dp.dsc_decompression_aux,
- &desc, true) < 0)
+ /*
+ * A logical port's OUI (at least for affected sinks) is all 0, so
+ * instead of that the parent port's OUI is used for identification.
+ */
+ if (drm_dp_mst_port_is_logical(connector->port)) {
+ aux = drm_dp_mst_aux_for_parent(connector->port);
+ if (!aux)
+ aux = &connector->mst_port->aux;
As I understand, we are setting connector->mst_port as intel_dp, in the
caller intel_dp_add_mst_connector so its unlikely that aux can be NULL,
but do you see if we need to check for aux?
Regards,
Ankit
+ }
+
+ if (drm_dp_read_dpcd_caps(aux, dpcd) < 0)
+ return false;
+
+ if (drm_dp_read_desc(aux, &desc, drm_dp_is_branch(dpcd)) < 0)
return false;
if (!drm_dp_has_quirk(&desc,
DP_DPCD_QUIRK_HBLANK_EXPANSION_REQUIRES_DSC))
return false;
- if (drm_dp_read_dpcd_caps(connector->dp.dsc_decompression_aux, dpcd) < 0)
- return false;
-
if (!(dpcd[DP_RECEIVE_PORT_0_CAP_0] & DP_HBLANK_EXPANSION_CAPABLE))
return false;
