[PATCH 1/3] drm/i915/cdclk: Fix CDCLK programming order when pipes are active

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>

Currently we always reprogram CDCLK from the
intel_set_cdclk_post_plane_update() when using squahs/crawl.
The code only works correctly for the cd2x update or full
modeset cases, and it was simply never updated to deal with
squash/crawl.

If the CDCLK frequency is increasing we must reprogram it
before we do anything else that might depend on the new
higher frequency, and conversely we must not decrease
the frequency until everything that might still depend
on the old higher frequency has been dealt with.

So let us only consider the relationship of the old and
new CDCLK frequencies when determining where to do
the reprogramming, regarless of whether all pipes might
be off or not at the time.

If the CDCLK freqiency remains unchanges we may still have to
do the reprogramming to change the voltage_level. Currently
we do that from intel_set_cdclk_pre_plane_update() which
probably is the right choice most of the time. The only
counterexample is when the voltage_level needs to increase
due to a DDI port, but the CDCLK frequency is decreasing.
The current approach will not bump the voltage level up until
after the port has already been enabled, which is too late.
But we'll take care of that case separately.

Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/i915/display/intel_cdclk.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c b/drivers/gpu/drm/i915/display/intel_cdclk.c
index 31aaa9780dfc..49e2f09a796a 100644
--- a/drivers/gpu/drm/i915/display/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/display/intel_cdclk.c
@@ -2600,7 +2600,6 @@ intel_set_cdclk_pre_plane_update(struct intel_atomic_state *state)
 		intel_atomic_get_old_cdclk_state(state);
 	const struct intel_cdclk_state *new_cdclk_state =
 		intel_atomic_get_new_cdclk_state(state);
-	enum pipe pipe = new_cdclk_state->pipe;
 
 	if (!intel_cdclk_changed(&old_cdclk_state->actual,
 				 &new_cdclk_state->actual))
@@ -2609,11 +2608,11 @@ intel_set_cdclk_pre_plane_update(struct intel_atomic_state *state)
 	if (IS_DG2(i915))
 		intel_cdclk_pcode_pre_notify(state);
 
-	if (pipe == INVALID_PIPE ||
-	    old_cdclk_state->actual.cdclk <= new_cdclk_state->actual.cdclk) {
+	if (old_cdclk_state->actual.cdclk <= new_cdclk_state->actual.cdclk) {
 		drm_WARN_ON(&i915->drm, !new_cdclk_state->base.changed);
 
-		intel_set_cdclk(i915, &new_cdclk_state->actual, pipe);
+		intel_set_cdclk(i915, &new_cdclk_state->actual,
+				new_cdclk_state->pipe);
 	}
 }
 
@@ -2632,7 +2631,6 @@ intel_set_cdclk_post_plane_update(struct intel_atomic_state *state)
 		intel_atomic_get_old_cdclk_state(state);
 	const struct intel_cdclk_state *new_cdclk_state =
 		intel_atomic_get_new_cdclk_state(state);
-	enum pipe pipe = new_cdclk_state->pipe;
 
 	if (!intel_cdclk_changed(&old_cdclk_state->actual,
 				 &new_cdclk_state->actual))
@@ -2641,11 +2639,11 @@ intel_set_cdclk_post_plane_update(struct intel_atomic_state *state)
 	if (IS_DG2(i915))
 		intel_cdclk_pcode_post_notify(state);
 
-	if (pipe != INVALID_PIPE &&
-	    old_cdclk_state->actual.cdclk > new_cdclk_state->actual.cdclk) {
+	if (old_cdclk_state->actual.cdclk > new_cdclk_state->actual.cdclk) {
 		drm_WARN_ON(&i915->drm, !new_cdclk_state->base.changed);
 
-		intel_set_cdclk(i915, &new_cdclk_state->actual, pipe);
+		intel_set_cdclk(i915, &new_cdclk_state->actual,
+				new_cdclk_state->pipe);
 	}
 }
 
-- 
2.43.2




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux