Re: [PATCH 1/4] drm/i915: Update mbus in intel_dbuf_mbus_update and do it properly

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Mar 25, 2024 at 08:29:56PM +0200, Lisovskiy, Stanislav wrote:
> On Mon, Mar 25, 2024 at 07:11:21PM +0200, Ville Syrjälä wrote:
> > On Mon, Mar 25, 2024 at 07:01:03PM +0200, Lisovskiy, Stanislav wrote:
> > > On Mon, Mar 25, 2024 at 04:45:49PM +0200, Ville Syrjälä wrote:
> > > > On Mon, Mar 25, 2024 at 01:23:26PM +0200, Stanislav Lisovskiy wrote:
> > > > > According to BSpec we need to do correspondent MBUS updates before
> > > > > or after DBUF reallocation, depending on whether we are enabling
> > > > > or disabling mbus joining(typical scenario is swithing between
> > > > > multiple and single displays).
> > > > > 
> > > > > Also we need to be able to update dbuf min tracker and mdclk ratio
> > > > > separately if mbus_join state didn't change, so lets add one
> > > > > degree of freedom and make it possible.
> > > > > 
> > > > > Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > > > > Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@xxxxxxxxx>
> > > > > ---
> > > > >  drivers/gpu/drm/i915/display/skl_watermark.c | 54 +++++++++++++-------
> > > > >  1 file changed, 35 insertions(+), 19 deletions(-)
> > > > > 
> > > > > diff --git a/drivers/gpu/drm/i915/display/skl_watermark.c b/drivers/gpu/drm/i915/display/skl_watermark.c
> > > > > index bc341abcab2fe..2b947870527fc 100644
> > > > > --- a/drivers/gpu/drm/i915/display/skl_watermark.c
> > > > > +++ b/drivers/gpu/drm/i915/display/skl_watermark.c
> > > > > @@ -3570,16 +3570,38 @@ void intel_dbuf_mdclk_cdclk_ratio_update(struct drm_i915_private *i915, u8 ratio
> > > > >  			     DBUF_MIN_TRACKER_STATE_SERVICE(ratio - 1));
> > > > >  }
> > > > >  
> > > > > +static void intel_dbuf_mdclk_min_tracker_update(struct intel_atomic_state *state)
> > > > > +{
> > > > > +	struct drm_i915_private *i915 = to_i915(state->base.dev);
> > > > > +	const struct intel_dbuf_state *old_dbuf_state =
> > > > > +		intel_atomic_get_old_dbuf_state(state);
> > > > > +	const struct intel_dbuf_state *new_dbuf_state =
> > > > > +		intel_atomic_get_new_dbuf_state(state);
> > > > > +
> > > > > +	if (DISPLAY_VER(i915) >= 20 &&
> > > > > +	    old_dbuf_state->mdclk_cdclk_ratio != new_dbuf_state->mdclk_cdclk_ratio) {
> > > > > +		/*
> > > > > +		 * For Xe2LPD and beyond, when there is a change in the ratio
> > > > > +		 * between MDCLK and CDCLK, updates to related registers need to
> > > > > +		 * happen at a specific point in the CDCLK change sequence. In
> > > > > +		 * that case, we defer to the call to
> > > > > +		 * intel_dbuf_mdclk_cdclk_ratio_update() to the CDCLK logic.
> > > > > +		 */
> > > > > +		return;
> > > > > +	}
> > > > 
> > > > That still needs to be removed or else we'll not update the ratio at
> > > > all during the mbus_join changes. I don't think I saw any removal
> > > > in subsequent patches.
> > > > 
> > > > > +
> > > > > +	intel_dbuf_mdclk_cdclk_ratio_update(i915, new_dbuf_state->mdclk_cdclk_ratio,
> > > 
> > > I don't get what is happening here.
> > > 
> > > "That whole condition I think needs to go. We want to update the ratio
> > > also when changing mbus joining. But that behavioural change doesn't
> > > really belong in this patch, so this is
> > > 
> > > Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>"
> > > 
> > > Now it again needs to be changed or changed in other patch(in this series or which one), 
> > > I don't follow.
> > > Should it be the patch changing MBUS join value?
> > 
> > Yeah, probably should be in the last patch. Perhaps we
> > could change it before that, but that would need some
> > extra brain power to make sure it doesn't temporarily
> > break something. So probably not worth the hassle
> > to do as a separate patch.
> > 
> > > 
> > > Stan
> > > 
> > > > 
> > > > And it just occurred to me that this thing will in fact be wrong
> > > > during the pre/post ddb hooks *and* cdclk is getting decreased
> > > > from the post plane update hook.
> > > > 
> > > > I can't immediately think of a super nice way to handle this.
> 
> First of all why that
> condition above prevents update when mbus join changes?
> It exits when mdclk_cdclk ratio is changed not mbus_join?

And what happens when mbus_join needs to be changed
but mdclk_cdclk_ratio remains unchanged?

> 
> That review process to me seems rather chaotic.
> Constantly something new pops up, moreover we did previously agree
> about that code.

The review process exists to make sure the code actually
works correctly. New things come up because of how human
brains work, not all things are immediately apparent to
everyone. If that were the case then you should have
been able to make the code 100% correct from the start,
and I wouldn't be able to come up with new ways in
which it can fail. So I guess you're the pot and
I'm the kettle?

-- 
Ville Syrjälä
Intel



[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux