On Fri, Mar 08, 2024 at 03:43:35PM +0200, Lisovskiy, Stanislav wrote:
> On Fri, Mar 08, 2024 at 12:07:19PM +0200, Ville Syrjälä wrote:
> > On Wed, Feb 28, 2024 at 10:02:13AM +0200, Stanislav Lisovskiy wrote:
> > > Currently we can't change MBUS join status without doing a modeset,
> > > because we are lacking mechanism to synchronize those with vblank.
> > > However then this means that we can't do a fastset, if there is a need
> > > to change MBUS join state. Fix that by implementing such change.
> > > We already call correspondent check and update at pre_plane dbuf update,
> > > so the only thing left is to have a non-modeset version of that.
> > > If active pipes stay the same then fastset is possible and only MBUS
> > > join state/ddb allocation updates would be committed.
> > >
> > > v2: Implement additional changes according to BSpec.
> > > Vblank wait is needed after MBus/Dbuf programming in case if
> > > no modeset is done and we are switching from single to multiple
> > > displays, i.e mbus join state switches from "joined" to "non-joined"
> > > state. Otherwise vblank wait is not needed according to spec.
> > >
> > > v3: Split mbus and dbox programming into to pre/post plane update parts,
> > > how it should be done according to BSpec.
> > >
> > > v4: - Place "single display to multiple displays scenario" MBUS/DBOX programming
> > > after DDB reallocation, but before crtc enabling(that is where is has
> > > to be according to spec).
> > > - Check if crtc is still active, not only the old state.
> > > - Do a vblank wait if MBUX DBOX register was modified.
> > > - And of course do vblank wait only if crtc was active.
> > > - Do vblank wait only if we are not doing a modeset, if we are doing
> > > something before *commit_modeset_enables, because all crtcs might be
> > > disabled at this moment, so we will get WARN if try waiting for vblank
> > > then.
> > > - Still getting FIFO underrun so try waiting for vblank in pre_plane update
> > > as well.
> > > - Write also pipe that we need to sync with to MBUS_CTL register.
> > >
> > > v5: - Do vblank wait only for the first pipe, if mbus is joined
> > > - Check also if new/old_dbuf_state is not NULL, before getting single pipe
> > > and active pipes.
> > >
> > > Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@xxxxxxxxx>
> > > ---
> > > drivers/gpu/drm/i915/display/intel_display.c | 13 ++-
> > > drivers/gpu/drm/i915/display/skl_watermark.c | 104 +++++++++++++++----
> > > drivers/gpu/drm/i915/display/skl_watermark.h | 1 +
> > > 3 files changed, 96 insertions(+), 22 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> > > index 00ac65a140298..989818f5d342f 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > > @@ -6906,6 +6906,17 @@ static void skl_commit_modeset_enables(struct intel_atomic_state *state)
> > > }
> > > }
> > >
> > > + /*
> > > + * Some MBUS/DBuf update scenarios(mbus join disable) require that
> > > + * changes are done _after_ DDB reallocation, but _before_ crtc enabling.
> > > + * Typically we are disabling resources in post_plane/crtc_enable hooks,
> > > + * however in that case BSpec explicitly states that this should be done
> > > + * before we enable additional displays.
> > > + * FIXME: Should we still call this also there(post_plane hook)
> > > + * for extra-safety? If so, how to make sure, we don't call it twice?
> > > + */
> > > + intel_dbuf_mbus_post_ddb_update(state);
> > > +
> > > update_pipes = modeset_pipes;
> > >
> > > /*
> > > @@ -7148,9 +7159,7 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
> > > }
> > >
> > > intel_encoders_update_prepare(state);
> > > -
> > > intel_dbuf_pre_plane_update(state);
> > > - intel_mbus_dbox_update(state);
> > >
> > > for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
> > > if (new_crtc_state->do_async_flip)
> > > diff --git a/drivers/gpu/drm/i915/display/skl_watermark.c b/drivers/gpu/drm/i915/display/skl_watermark.c
> > > index 606b7ba9db9ce..f0604ede399f7 100644
> > > --- a/drivers/gpu/drm/i915/display/skl_watermark.c
> > > +++ b/drivers/gpu/drm/i915/display/skl_watermark.c
> > > @@ -2628,13 +2628,6 @@ skl_compute_ddb(struct intel_atomic_state *state)
> > > if (ret)
> > > return ret;
> > >
> > > - if (old_dbuf_state->joined_mbus != new_dbuf_state->joined_mbus) {
> > > - /* TODO: Implement vblank synchronized MBUS joining changes */
> > > - ret = intel_modeset_all_pipes_late(state, "MBUS joining change");
> > > - if (ret)
> > > - return ret;
> > > - }
> > > -
> > > drm_dbg_kms(&i915->drm,
> > > "Enabled dbuf slices 0x%x -> 0x%x (total dbuf slices 0x%x), mbus joined? %s->%s\n",
> > > old_dbuf_state->enabled_slices,
> > > @@ -3539,8 +3532,9 @@ static void intel_dbuf_mbus_update(struct intel_atomic_state *state)
> > > struct drm_i915_private *i915 = to_i915(state->base.dev);
> > > u32 mbus_ctl, dbuf_min_tracker_val;
> > > enum dbuf_slice slice;
> > > - const struct intel_dbuf_state *dbuf_state =
> > > + const struct intel_dbuf_state *new_dbuf_state =
> > > intel_atomic_get_new_dbuf_state(state);
> > > + enum pipe pipe = ffs(new_dbuf_state->active_pipes) - 1;
> >
> > That pipe might not even be enabled at this point.
>
> Which scenario do you mean?
> intel_dbuf_mbus_update is called in two cases:
>
> 1) When switching from single display to multiple displays, according
> to spec we should program it before enabling additional displays,
> but after ddb allocation happens.
>
> 2) When switching from multiple displays to a single display,
> we program it after disabling all displays except one, but
> before ddb reallocation happens.
You seem to call it when the number of active pipes changes.
That doesn't necessarily mean anything for mbus joining.
> Probably you mean the case when its called from intel_dbuf_pre_plane_update,
> because commit_modeset_enables hasn't been yet called?
Yes, the pipe may still be off.
> That would be the case of switching from multiple displays to single one,
> for non-modeset at least shoudln't be a problem, as I understand.
I don't know what the hardware does in this case. Better not
to ask for trouble IMO in case it turns out the hardware won't
like it.
>
> But where should this be called then from?
>
> We always called this function from intel_dbuf_pre_plane_update.
As mentioned later in my mail, I think we just want a pre/post
ddb callsites for this stuff. Though the credit stuff (should we
need to account for those changing) might complicate things further...
--
Ville Syrjälä
Intel
