From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> When multiple pipes are enabled by the BIOS we try to read out each in turn. But we do the readout for the second only after the inherited vma for the first has been rebound into its original place (and thus the PTEs have been rewritten). Unlike the BIOS we set some high caching bits in the PTE on MTL which confuses the readout for the second plane. Filter out the non-address bits from the PTE value appropriately to fix this. I suppose it might also be possible that the BIOS would already set some caching bits as well, in which case we'd run into this same issue already for the first plane. TODO: - should abstract the PTE decoding to avoid details leaking all over - should probably do the readout for all the planes before we touch anything (including the PTEs) so that we truly read out the BIOS state Reviewed-by: Andrzej Hajda <andrzej.hajda@xxxxxxxxx> Acked-by: Nirmoy Das <nirmoy.das@xxxxxxxxx> Tested-by: Paz Zcharya <pazz@xxxxxxxxxxxx> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> --- drivers/gpu/drm/i915/display/intel_plane_initial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/display/intel_plane_initial.c b/drivers/gpu/drm/i915/display/intel_plane_initial.c index a55c09cbd0e4..ffc92b18fcf5 100644 --- a/drivers/gpu/drm/i915/display/intel_plane_initial.c +++ b/drivers/gpu/drm/i915/display/intel_plane_initial.c @@ -72,7 +72,7 @@ initial_plane_vma(struct drm_i915_private *i915, return NULL; } - phys_base = pte & I915_GTT_PAGE_MASK; + phys_base = pte & GEN12_GGTT_PTE_ADDR_MASK; mem = i915->mm.regions[INTEL_REGION_LMEM_0]; /* -- 2.43.0
