Allocate stream id after HDCP AKE stage and not before so that it
can also be done during link integrity check.
Right now for MST scenarios LIC fails after hdcp enablement for this
reason.
Signed-off-by: Suraj Kandpal <suraj.kandpal@xxxxxxxxx>
---
drivers/gpu/drm/i915/display/intel_hdcp.c | 115 ++++++++++------------
1 file changed, 53 insertions(+), 62 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_hdcp.c b/drivers/gpu/drm/i915/display/intel_hdcp.c
index f6eccbd9e7ae..a624bfbe5718 100644
--- a/drivers/gpu/drm/i915/display/intel_hdcp.c
+++ b/drivers/gpu/drm/i915/display/intel_hdcp.c
@@ -69,19 +69,51 @@ static int intel_conn_to_vcpi(struct intel_connector *connector)
* DP MST topology. Though it is not compulsory, security fw should change its
* policy to mark different content_types for different streams.
*/
-static void
-intel_hdcp_required_content_stream(struct intel_digital_port *dig_port)
+static int
+intel_hdcp_required_content_stream(struct intel_hdcp *hdcp,
+ struct intel_digital_port *dig_port)
{
+ struct drm_connector_list_iter conn_iter;
+ struct intel_digital_port *conn_dig_port;
+ struct intel_connector *connector;
+ struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
struct hdcp_port_data *data = &dig_port->hdcp_port_data;
bool enforce_type0 = false;
int k;
if (dig_port->hdcp_auth_status)
- return;
+ return 0;
+
+ data->k = 0;
if (!dig_port->hdcp_mst_type1_capable)
enforce_type0 = true;
+ drm_connector_list_iter_begin(&i915->drm, &conn_iter);
+ for_each_intel_connector_iter(connector, &conn_iter) {
+ if (connector->base.status == connector_status_disconnected)
+ continue;
+
+ if (!intel_encoder_is_mst(intel_attached_encoder(connector)))
+ continue;
+
+ conn_dig_port = intel_attached_dig_port(connector);
+ if (conn_dig_port != dig_port)
+ continue;
+
+ data->streams[data->k].stream_id =
+ intel_conn_to_vcpi(connector);
+ data->k++;
+
+ /* if there is only one active stream */
+ if (dig_port->dp.active_mst_links <= 1)
+ break;
+ }
+ drm_connector_list_iter_end(&conn_iter);
+
+ if (drm_WARN_ON(&i915->drm, data->k > INTEL_NUM_PIPES(i915) || data->k == 0))
+ return -EINVAL;
+
/*
* Apply common protection level across all streams in DP MST Topology.
* Use highest supported content type for all streams in DP MST Topology.
@@ -89,18 +121,23 @@ intel_hdcp_required_content_stream(struct intel_digital_port *dig_port)
for (k = 0; k < data->k; k++)
data->streams[k].stream_type =
enforce_type0 ? DRM_MODE_HDCP_CONTENT_TYPE0 : DRM_MODE_HDCP_CONTENT_TYPE1;
+
+ return 0;
}
-static void intel_hdcp_prepare_streams(struct intel_connector *connector)
+static int intel_hdcp_prepare_streams(struct intel_connector *connector)
{
struct intel_digital_port *dig_port = intel_attached_dig_port(connector);
struct hdcp_port_data *data = &dig_port->hdcp_port_data;
struct intel_hdcp *hdcp = &connector->hdcp;
if (!intel_encoder_is_mst(intel_attached_encoder(connector))) {
+ data->k = 1;
+ data->streams[0].stream_id = 0;
data->streams[0].stream_type = hdcp->content_type;
+ return 0;
} else {
- intel_hdcp_required_content_stream(dig_port);
+ return intel_hdcp_required_content_stream(hdcp, dig_port);
}
}
@@ -1911,7 +1948,13 @@ static int hdcp2_authenticate_and_encrypt(struct intel_connector *connector)
for (i = 0; i < tries && !dig_port->hdcp_auth_status; i++) {
ret = hdcp2_authenticate_sink(connector);
if (!ret) {
- intel_hdcp_prepare_streams(connector);
+ ret = intel_hdcp_prepare_streams(connector);
+ if (ret) {
+ drm_dbg_kms(&i915->drm,
+ "Prepare stream failed.(%d)\n",
+ ret);
+ break;
+ }
ret = hdcp2_propagate_stream_management_info(connector);
if (ret) {
@@ -2315,51 +2358,6 @@ int intel_hdcp_init(struct intel_connector *connector,
return 0;
}
-static int
-intel_hdcp_set_streams(struct intel_digital_port *dig_port)
-{
- struct drm_connector_list_iter conn_iter;
- struct intel_digital_port *conn_dig_port;
- struct intel_connector *connector;
- struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
- struct hdcp_port_data *data = &dig_port->hdcp_port_data;
-
- if (!intel_encoder_is_mst(&dig_port->base)) {
- data->k = 1;
- data->streams[0].stream_id = 0;
- return 0;
- }
-
- data->k = 0;
-
- drm_connector_list_iter_begin(&i915->drm, &conn_iter);
- for_each_intel_connector_iter(connector, &conn_iter) {
- if (connector->base.status == connector_status_disconnected)
- continue;
-
- if (!intel_encoder_is_mst(intel_attached_encoder(connector)))
- continue;
-
- conn_dig_port = intel_attached_dig_port(connector);
- if (conn_dig_port != dig_port)
- continue;
-
- data->streams[data->k].stream_id =
- intel_conn_to_vcpi(connector);
- data->k++;
-
- /* if there is only one active stream */
- if (dig_port->dp.active_mst_links <= 1)
- break;
- }
- drm_connector_list_iter_end(&conn_iter);
-
- if (drm_WARN_ON(&i915->drm, data->k > INTEL_NUM_PIPES(i915) || data->k == 0))
- return -EINVAL;
-
- return 0;
-}
-
static int _intel_hdcp_enable(struct intel_atomic_state *state,
struct intel_encoder *encoder,
const struct intel_crtc_state *pipe_config,
@@ -2406,17 +2404,10 @@ static int _intel_hdcp_enable(struct intel_atomic_state *state,
* is capable of HDCP2.2, it is preferred to use HDCP2.2.
*/
if (intel_hdcp2_capable(connector)) {
- ret = intel_hdcp_set_streams(dig_port);
- if (!ret) {
- ret = _intel_hdcp2_enable(connector);
- if (!ret)
- check_link_interval =
- DRM_HDCP2_CHECK_PERIOD_MS;
- } else {
- drm_dbg_kms(&i915->drm,
- "Set content streams failed: (%d)\n",
- ret);
- }
+ ret = _intel_hdcp2_enable(connector);
+ if (!ret)
+ check_link_interval =
+ DRM_HDCP2_CHECK_PERIOD_MS;
}
/*
--
2.25.1
