From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> Currently icl_compute_tc_phy_dplls() assumes that the active PLL will be the TC PLL (as opposed to the TBT PLL). The actual PLL will be selected during the modeset enable sequence, but we need to put *something* into the crtc_state->shared_dpll already during compute_config(). The downside of assuming one PLL or the other is that we'll fail to fastset if the assumption doesn't match what was in use previously. So let's instead keep the same PLL that was in use previously (assuming there was one). This should allow fastset to work again when using TBT PLL, at least in the steady state. Now, assuming we want keep the same PLL may not be entirely correct either. But we should be covered by the typ-c link reset handling which will force a full modeset by flagging connectors_changed=true which means the resulting modeset can't be converted into a fastset even if the full crtc state looks identical. Cc: Imre Deak <imre.deak@xxxxxxxxx> Cc: Suraj Kandpal <suraj.kandpal@xxxxxxxxx> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> --- drivers/gpu/drm/i915/display/intel_dpll_mgr.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c index ef57dad1a9cb..1008e18177c9 100644 --- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c +++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c @@ -3308,6 +3308,8 @@ static int icl_compute_tc_phy_dplls(struct intel_atomic_state *state, struct drm_i915_private *i915 = to_i915(state->base.dev); struct intel_crtc_state *crtc_state = intel_atomic_get_new_crtc_state(state, crtc); + const struct intel_crtc_state *old_crtc_state = + intel_atomic_get_old_crtc_state(state, crtc); struct icl_port_dpll *port_dpll = &crtc_state->icl_port_dplls[ICL_PORT_DPLL_DEFAULT]; struct skl_wrpll_params pll_params = {}; @@ -3326,7 +3328,11 @@ static int icl_compute_tc_phy_dplls(struct intel_atomic_state *state, return ret; /* this is mainly for the fastset check */ - icl_set_active_port_dpll(crtc_state, ICL_PORT_DPLL_MG_PHY); + if (old_crtc_state->shared_dpll && + old_crtc_state->shared_dpll->info->id == DPLL_ID_ICL_TBTPLL) + icl_set_active_port_dpll(crtc_state, ICL_PORT_DPLL_DEFAULT); + else + icl_set_active_port_dpll(crtc_state, ICL_PORT_DPLL_MG_PHY); crtc_state->port_clock = icl_ddi_mg_pll_get_freq(i915, NULL, &port_dpll->hw_state); -- 2.41.0