On Wed, Jan 17, 2024 at 05:57:17PM +0200, Stanislav Lisovskiy wrote:
> We need that in order to force disable SAGV in next patch.
> Also it is beneficial to separate that code, as in majority cases,
> when SAGV is enabled, we don't even need those calculations.
> Also we probably need to determine max PSF GV point as well, however
> currently we don't do that when we disable SAGV, which might be
> actually causing some issues in that case.
>
> v2: - Introduce helper adl_qgv_bw(counterpart to adl_psf_bw)
> (Ville Syrjälä)
> - Don't restrict psf gv points for SAGV disable case
> (Ville Syrjälä)
>
> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/display/intel_bw.c | 81 ++++++++++++++++---------
> 1 file changed, 53 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_bw.c b/drivers/gpu/drm/i915/display/intel_bw.c
> index 77886cc21211..7baa1c13eccd 100644
> --- a/drivers/gpu/drm/i915/display/intel_bw.c
> +++ b/drivers/gpu/drm/i915/display/intel_bw.c
> @@ -652,15 +652,31 @@ static unsigned int tgl_max_bw_index(struct drm_i915_private *dev_priv,
> return 0;
> }
>
> -static unsigned int adl_psf_bw(struct drm_i915_private *dev_priv,
> +static unsigned int adl_psf_bw(struct drm_i915_private *i915,
> int psf_gv_point)
> {
> const struct intel_bw_info *bi =
> - &dev_priv->display.bw.max[0];
> + &i915->display.bw.max[0];
Unrelated change.
>
> return bi->psf_bw[psf_gv_point];
> }
>
> +static unsigned int adl_qgv_bw(struct drm_i915_private *i915,
s/adl/icl/, or s/adl/intel/ perhaps.
> + int qgv_point, int num_active_planes)
Please keep the parameters in the same order as elsewhere.
It's hard enough trying to juggle multiple integer parameters
without intentionally confusing matters by swapping the order
randomly.
> +{
> + unsigned int idx;
> +
> + if (DISPLAY_VER(i915) > 11)
>= 12
> + idx = tgl_max_bw_index(i915, num_active_planes, qgv_point);
> + else
> + idx = icl_max_bw_index(i915, num_active_planes, qgv_point);
> +
> + if (idx >= ARRAY_SIZE(i915->display.bw.max))
> + return 0;
> +
> + return i915->display.bw.max[idx].deratedbw[qgv_point];
> +}
> +
> void intel_bw_init_hw(struct drm_i915_private *dev_priv)
> {
> if (!HAS_DISPLAY(dev_priv))
> @@ -806,6 +822,36 @@ intel_atomic_get_bw_state(struct intel_atomic_state *state)
> return to_intel_bw_state(bw_state);
> }
>
> +static unsigned int icl_max_bw_qgv_point(struct drm_i915_private *i915,
> + int num_active_planes)
> +{
> + unsigned int max_bw_point = 0;
> + unsigned int max_bw = 0;
> + unsigned int num_qgv_points = i915->display.bw.max[0].num_qgv_points;
> + int i;
> +
> + for (i = 0; i < num_qgv_points; i++) {
> + unsigned int max_data_rate;
> +
> + max_data_rate = adl_qgv_bw(i915, i, num_active_planes);
> +
> + /*
> + * We need to know which qgv point gives us
> + * maximum bandwidth in order to disable SAGV
> + * if we find that we exceed SAGV block time
> + * with watermarks. By that moment we already
> + * have those, as it is calculated earlier in
> + * intel_atomic_check,
> + */
> + if (max_data_rate > max_bw) {
> + max_bw_point = i;
> + max_bw = max_data_rate;
> + }
> + }
> +
> + return max_bw_point;
> +}
> +
> static int mtl_find_qgv_points(struct drm_i915_private *i915,
> unsigned int data_rate,
> unsigned int num_active_planes,
> @@ -883,8 +929,6 @@ static int icl_find_qgv_points(struct drm_i915_private *i915,
> const struct intel_bw_state *old_bw_state,
> struct intel_bw_state *new_bw_state)
> {
> - unsigned int max_bw_point = 0;
> - unsigned int max_bw = 0;
> unsigned int num_psf_gv_points = i915->display.bw.max[0].num_psf_gv_points;
> unsigned int num_qgv_points = i915->display.bw.max[0].num_qgv_points;
> u16 psf_points = 0;
> @@ -897,31 +941,10 @@ static int icl_find_qgv_points(struct drm_i915_private *i915,
> return ret;
>
> for (i = 0; i < num_qgv_points; i++) {
> - unsigned int idx;
> unsigned int max_data_rate;
>
> - if (DISPLAY_VER(i915) >= 12)
> - idx = tgl_max_bw_index(i915, num_active_planes, i);
> - else
> - idx = icl_max_bw_index(i915, num_active_planes, i);
> -
> - if (idx >= ARRAY_SIZE(i915->display.bw.max))
> - continue;
> -
> - max_data_rate = i915->display.bw.max[idx].deratedbw[i];
> + max_data_rate = adl_qgv_bw(i915, i, num_active_planes);
>
> - /*
> - * We need to know which qgv point gives us
> - * maximum bandwidth in order to disable SAGV
> - * if we find that we exceed SAGV block time
> - * with watermarks. By that moment we already
> - * have those, as it is calculated earlier in
> - * intel_atomic_check,
> - */
> - if (max_data_rate > max_bw) {
> - max_bw_point = i;
> - max_bw = max_data_rate;
> - }
> if (max_data_rate >= data_rate)
> qgv_points |= BIT(i);
>
> @@ -965,9 +988,11 @@ static int icl_find_qgv_points(struct drm_i915_private *i915,
> * cause.
> */
> if (!intel_can_enable_sagv(i915, new_bw_state)) {
> - qgv_points = BIT(max_bw_point);
> + unsigned int max_bw_qgv_point = icl_max_bw_qgv_point(i915, num_active_planes);
> +
> + qgv_points = BIT(max_bw_qgv_point);
> drm_dbg_kms(&i915->drm, "No SAGV, using single QGV point %d\n",
> - max_bw_point);
> + max_bw_qgv_point);
> }
>
> /*
> --
> 2.37.3
--
Ville Syrjälä
Intel
