In an MST topology the DSC capabilities are specific to each connector,
retrieved either from the sink if it decompresses the stream, or from a
branch device between the source and the sink in case this branch device
does the decompression. Accordingly each connector needs to cache its
own DSC DPCD and FEC capabilities, along with the AUX device through
which the decompression can be enabled. This patch prepares for that by
storing the capabilities and the DSC AUX device in the connector, for
now these just matching the version stored in intel_dp. The follow-up
patches will convert all users to look up these in the connector instead
of intel_dp, after which the intel_dp copies are removed.
Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
---
.../drm/i915/display/intel_display_types.h | 6 +++
drivers/gpu/drm/i915/display/intel_dp.c | 53 +++++++++++++------
2 files changed, 43 insertions(+), 16 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
index 8d8b2f8d37a99..d6600079bcf74 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -620,6 +620,12 @@ struct intel_connector {
struct intel_dp *mst_port;
+ struct {
+ struct drm_dp_aux *dsc_decompression_aux;
+ u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE];
+ u8 fec_capability;
+ } dp;
+
/* Work struct to schedule a uevent on link train failure */
struct work_struct modeset_retry_work;
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 1bd11f9e308c1..c7dd65a27a1b0 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -3467,7 +3467,8 @@ bool intel_dp_get_colorimetry_status(struct intel_dp *intel_dp)
return dprx & DP_VSC_SDP_EXT_FOR_COLORIMETRY_SUPPORTED;
}
-static void intel_dp_get_dsc_sink_cap(u8 dpcd_rev, struct intel_dp *intel_dp)
+static void intel_dp_get_dsc_sink_cap(u8 dpcd_rev, struct intel_dp *intel_dp,
+ struct intel_connector *connector)
{
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
@@ -3475,35 +3476,46 @@ static void intel_dp_get_dsc_sink_cap(u8 dpcd_rev, struct intel_dp *intel_dp)
* Clear the cached register set to avoid using stale values
* for the sinks that do not support DSC.
*/
- memset(intel_dp->dsc_dpcd, 0, sizeof(intel_dp->dsc_dpcd));
+ memset(connector->dp.dsc_dpcd, 0, sizeof(connector->dp.dsc_dpcd));
/* Clear fec_capable to avoid using stale values */
- intel_dp->fec_capable = 0;
+ connector->dp.fec_capability = 0;
/* Cache the DSC DPCD if eDP or DP rev >= 1.4 */
if ((intel_dp_is_edp(intel_dp) && dpcd_rev >= DP_EDP_14) ||
(!intel_dp_is_edp(intel_dp) && dpcd_rev >= 0x14)) {
- if (drm_dp_dpcd_read(&intel_dp->aux, DP_DSC_SUPPORT,
- intel_dp->dsc_dpcd,
- sizeof(intel_dp->dsc_dpcd)) < 0)
+ if (drm_dp_dpcd_read(connector->dp.dsc_decompression_aux,
+ DP_DSC_SUPPORT,
+ connector->dp.dsc_dpcd,
+ sizeof(connector->dp.dsc_dpcd)) < 0)
drm_err(&i915->drm,
"Failed to read DPCD register 0x%x\n",
DP_DSC_SUPPORT);
drm_dbg_kms(&i915->drm, "DSC DPCD: %*ph\n",
- (int)sizeof(intel_dp->dsc_dpcd),
- intel_dp->dsc_dpcd);
+ (int)sizeof(connector->dp.dsc_dpcd),
+ connector->dp.dsc_dpcd);
/* FEC is supported only on DP 1.4 */
if (!intel_dp_is_edp(intel_dp) &&
- drm_dp_dpcd_readb(&intel_dp->aux, DP_FEC_CAPABILITY,
- &intel_dp->fec_capable) < 0)
+ drm_dp_dpcd_readb(connector->dp.dsc_decompression_aux,
+ DP_FEC_CAPABILITY,
+ &connector->dp.fec_capability) < 0)
drm_err(&i915->drm,
"Failed to read FEC DPCD register\n");
drm_dbg_kms(&i915->drm, "FEC CAPABILITY: %x\n",
- intel_dp->fec_capable);
+ connector->dp.fec_capability);
}
+
+ /*
+ * TODO: remove the following intel_dp copies once all users
+ * are converted to look up DSC DPCD/FEC capability via the
+ * connector.
+ */
+ memcpy(intel_dp->dsc_dpcd, connector->dp.dsc_dpcd,
+ sizeof(intel_dp->dsc_dpcd));
+ intel_dp->fec_capable = connector->dp.fec_capability;
}
static void intel_edp_mso_mode_fixup(struct intel_connector *connector,
@@ -3595,7 +3607,7 @@ static void intel_edp_mso_init(struct intel_dp *intel_dp)
}
static bool
-intel_edp_init_dpcd(struct intel_dp *intel_dp)
+intel_edp_init_dpcd(struct intel_dp *intel_dp, struct intel_connector *connector)
{
struct drm_i915_private *dev_priv =
to_i915(dp_to_dig_port(intel_dp)->base.base.dev);
@@ -3675,7 +3687,8 @@ intel_edp_init_dpcd(struct intel_dp *intel_dp)
/* Read the eDP DSC DPCD registers */
if (HAS_DSC(dev_priv))
intel_dp_get_dsc_sink_cap(intel_dp->edp_dpcd[0],
- intel_dp);
+ intel_dp,
+ connector);
/*
* If needed, program our source OUI so we can make various Intel-specific AUX services
@@ -5345,7 +5358,9 @@ intel_dp_detect(struct drm_connector *connector,
bool force)
{
struct drm_i915_private *dev_priv = to_i915(connector->dev);
- struct intel_dp *intel_dp = intel_attached_dp(to_intel_connector(connector));
+ struct intel_connector *intel_connector =
+ to_intel_connector(connector);
+ struct intel_dp *intel_dp = intel_attached_dp(intel_connector);
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct intel_encoder *encoder = &dig_port->base;
enum drm_connector_status status;
@@ -5368,7 +5383,12 @@ intel_dp_detect(struct drm_connector *connector,
if (status == connector_status_disconnected) {
memset(&intel_dp->compliance, 0, sizeof(intel_dp->compliance));
+ /*
+ * TODO: Remove clearing the DPCD in intel_dp, once all
+ * user are converted to using the DPCD in connector.
+ */
memset(intel_dp->dsc_dpcd, 0, sizeof(intel_dp->dsc_dpcd));
+ memset(intel_connector->dp.dsc_dpcd, 0, sizeof(intel_connector->dp.dsc_dpcd));
if (intel_dp->is_mst) {
drm_dbg_kms(&dev_priv->drm,
@@ -5386,7 +5406,7 @@ intel_dp_detect(struct drm_connector *connector,
/* Read DP Sink DSC Cap DPCD regs for DP v1.4 */
if (HAS_DSC(dev_priv))
intel_dp_get_dsc_sink_cap(intel_dp->dpcd[DP_DPCD_REV],
- intel_dp);
+ intel_dp, intel_connector);
intel_dp_configure_mst(intel_dp);
@@ -5971,7 +5991,7 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
intel_hpd_enable_detection(encoder);
/* Cache DPCD and EDID for edp. */
- has_dpcd = intel_edp_init_dpcd(intel_dp);
+ has_dpcd = intel_edp_init_dpcd(intel_dp, intel_connector);
if (!has_dpcd) {
/* if this fails, presume the device is a ghost */
@@ -6145,6 +6165,7 @@ intel_dp_init_connector(struct intel_digital_port *dig_port,
intel_dp->pps.active_pipe = vlv_active_pipe(intel_dp);
intel_dp_aux_init(intel_dp);
+ intel_connector->dp.dsc_decompression_aux = &intel_dp->aux;
drm_dbg_kms(&dev_priv->drm,
"Adding %s connector on [ENCODER:%d:%s]\n",
--
2.39.2
