On Thu, Sep 19, 2013 at 05:40:15PM +0100, Damien Lespiau wrote: > v4 was: > http://lists.freedesktop.org/archives/dri-devel/2013-September/045340.html > > Changes from v4: > > - The kernel is now in charge of adjusting the stereo mode timings. > - There is a per-connector opt-in boolean to expose stereo modes, letting > people enable stereo for each driver/connector. > - The series now depends on the latest bits from the drm-intel tree > - Removed the 2 buffers check that was judged unnecessary > - I realized that for frame packing modes (where you have to adjust the > vdisplay to be 2 * vdisplay + vblank) with a NTSC clock I was > reconstructing the clock without adjusting it by 1000 / 1001. Now that the > timing computation is in the kernel, fixed it there. > - I also checked that we correctly match against the 2D CEA mode for the AVI > infoframes. The last bit to make it work was the introduction of crtc_clock > to separate the original clock from the one computed by > drm_mode_set_crtcinfo() > - And finally, I booted with i915.fastboot=1 and discovered that the pipe_src > register was getting clobbered, so fixed that as well Everything except patches 14 and 17: Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> One thing we're missing though is making sure the fb is big enough for the stereo adjusted primary plane size. -- Ville Syrjälä Intel OTC _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/intel-gfx
