Yes, we've proposed this change before. The reasoning is still the same. Added below to include in this thread as well. Is there a reason the below explanation and test is not sufficient? This issue affected several different CometLake-based Chrome OS device designs. The details of the original report are in the Google partner issue tracker (issue # 178169843), but I believe this requires a Google partner account to access: https://partnerissuetracker.corp.google.com/issues/178169843 The summary is that we were seeing these "*ERROR* LSPCON mode hasn't settled" messages in the kernel logs followed by the display not working at all. We increased the timeout to 500ms while investigation continued and this reduced the number of occurrences of this issue: https://chromium.googlesource.com/chromiumos/third_party/kernel/+/7b2899fc1a6f9409e8075b3153baaf02c4d1fc75 The problem continued to occur on about 2% of devices even after increasing the timeout to 500ms. The investigation continued in issue # 188035814, with engineers from Parade and Intel involved. Ultimately, the recommendation from Intel engineers was to increase the timeout further: https://partnerissuetracker.corp.google.com/issues/188035814 The timeout was then increased to 1000ms: https://chromium.googlesource.com/chromiumos/third_party/kernel/+/a16cfc2062e768c8e5ad8fa09b8ca127aa1ead9a I recently ran 100 reboot trials on one device and found that the median time for the LSPCON mode to settle was 440ms and the max was 444ms. But we know from the original reports that even after we set the timeout to 500ms the issue continued to happen on some small percentage of devices. So this is why I picked the larger value of 800ms. >> This is to eliminate all cases of "*ERROR* LSPCON mode hasn't settled", >> followed by link training errors. Intel engineers recommended increasing >> this timeout and that does resolve the issue. >> >> On some CometLake-based device designs the Parade PS175 takes more than >> 400ms to settle in PCON mode. 100 reboot trials on one device resulted >> in a median settle time of 440ms and a maximum of 444ms. Even after >> increasing the timeout to 500ms, 2% of devices still had this error. So >> this increases the timeout to 800ms. >> >> Signed-off-by: Pablo Ceballos <pceballos@xxxxxxxxxx> > >I think we've been here before. Do you have a publicly available gitlab >issue with the proper logs? If not, please file one at [1]. > >BR, >Jani. > >[1] https://gitlab.freedesktop.org/drm/intel/issues/new > > >> --- >> >> V2: Added more details in the commit message >> V3: Only apply the increased timeout if the vendor is Parade >> >> drivers/gpu/drm/i915/display/intel_lspcon.c | 21 ++++++++++++++++++++- >> 1 file changed, 20 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/gpu/drm/i915/display/intel_lspcon.c b/drivers/gpu/drm/i915/display/intel_lspcon.c >> index bb3b5355a0d9..b07eab84cc63 100644 >> --- a/drivers/gpu/drm/i915/display/intel_lspcon.c >> +++ b/drivers/gpu/drm/i915/display/intel_lspcon.c >> @@ -153,6 +153,24 @@ static enum drm_lspcon_mode lspcon_get_current_mode(struct intel_lspcon *lspcon) >> return current_mode; >> } >> >> +static u32 lspcon_get_mode_settle_timeout(struct intel_lspcon *lspcon) >> +{ >> + u32 timeout_ms = 400; >> + >> + /* >> + * On some CometLake-based device designs the Parade PS175 takes more >> + * than 400ms to settle in PCON mode. 100 reboot trials on one device >> + * resulted in a median settle time of 440ms and a maximum of 444ms. >> + * Even after increasing the timeout to 500ms, 2% of devices still had >> + * this error. So this sets the timeout to 800ms. >> + */ >> + if (lspcon->vendor == LSPCON_VENDOR_PARADE) >> + timeout_ms = 800; >> + >> + return timeout_ms; >> +} >> + >> + >> static enum drm_lspcon_mode lspcon_wait_mode(struct intel_lspcon *lspcon, >> enum drm_lspcon_mode mode) >> { >> @@ -167,7 +185,8 @@ static enum drm_lspcon_mode lspcon_wait_mode(struct intel_lspcon *lspcon, >> drm_dbg_kms(&i915->drm, "Waiting for LSPCON mode %s to settle\n", >> lspcon_mode_name(mode)); >> >> - wait_for((current_mode = lspcon_get_current_mode(lspcon)) == mode, 400); >> + wait_for((current_mode = lspcon_get_current_mode(lspcon)) == mode, >> + lspcon_get_mode_settle_timeout(lspcon)); >> if (current_mode != mode) >> drm_err(&i915->drm, "LSPCON mode hasn't settled\n");
