> -----Original Message-----
> From: Intel-gfx <intel-gfx-bounces@xxxxxxxxxxxxxxxxxxxxx> On Behalf Of Ville
> Syrjala
> Sent: 28 August 2023 11:12
> To: intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> Subject: [PATCH 4/6] drm/i915: Enable VRR later during fastsets
>
> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>
> In order to reconcile seamless M/N updates with VRR we'll need to defer the
> fastset VRR enable to happen after the seamless M/N update (which
> happens during the vblank evade critical section). So just push the VRR
> enable to be the last thing during the update.
>
> This will also affect the vblank evasion as the transcoder will now still be
> running with the old VRR state during the vblank evasion. So just grab the
> timings always from the old crtc state during any non-modeset commit, and
> also grab the current state of VRR from the active timings (as we disable VRR
> before vblank evasion during fastsets).
>
> This also fixes vblank evasion for seamless M/N updates as we now properly
> account for the fact that the M/N update happens after vblank evasion.
>
> Cc: Manasi Navare <navaremanasi@xxxxxxxxxxxx>
> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/i915/display/intel_crtc.c | 35 ++++++++++++--------
> drivers/gpu/drm/i915/display/intel_display.c | 21 ++++++++----
> 2 files changed, 36 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_crtc.c
> b/drivers/gpu/drm/i915/display/intel_crtc.c
> index e46a15d59d79..1992e7060263 100644
> --- a/drivers/gpu/drm/i915/display/intel_crtc.c
> +++ b/drivers/gpu/drm/i915/display/intel_crtc.c
> @@ -472,15 +472,31 @@ static void
> intel_crtc_vblank_evade_scanlines(struct intel_atomic_state *state,
> struct intel_crtc *crtc,
> int *min, int *max, int
> *vblank_start) {
> + const struct intel_crtc_state *old_crtc_state =
> + intel_atomic_get_old_crtc_state(state, crtc);
> const struct intel_crtc_state *new_crtc_state =
> intel_atomic_get_new_crtc_state(state, crtc);
> - const struct drm_display_mode *adjusted_mode = &new_crtc_state-
> >hw.adjusted_mode;
> + const struct intel_crtc_state *crtc_state;
> + const struct drm_display_mode *adjusted_mode;
>
> - if (new_crtc_state->vrr.enable) {
> - if (intel_vrr_is_push_sent(new_crtc_state))
> - *vblank_start =
> intel_vrr_vmin_vblank_start(new_crtc_state);
> + /*
> + * During fastsets/etc. the transcoder is still
> + * running with the old timings at this point.
> + *
> + * TODO: maybe just use the active timings here?
> + */
> + if (intel_crtc_needs_modeset(new_crtc_state))
> + crtc_state = new_crtc_state;
> + else
> + crtc_state = old_crtc_state;
> +
> + adjusted_mode = &crtc_state->hw.adjusted_mode;
> +
> + if (crtc->mode_flags & I915_MODE_FLAG_VRR) {
> + if (intel_vrr_is_push_sent(crtc_state))
> + *vblank_start =
> intel_vrr_vmin_vblank_start(crtc_state);
> else
> - *vblank_start =
> intel_vrr_vmax_vblank_start(new_crtc_state);
> + *vblank_start =
> intel_vrr_vmax_vblank_start(crtc_state);
> } else {
> *vblank_start = intel_mode_vblank_start(adjusted_mode);
> }
> @@ -710,15 +726,6 @@ void intel_pipe_update_end(struct
> intel_atomic_state *state,
> */
> intel_vrr_send_push(new_crtc_state);
>
> - /*
> - * Seamless M/N update may need to update frame timings.
> - *
> - * FIXME Should be synchronized with the start of vblank somehow...
> - */
> - if (new_crtc_state->seamless_m_n &&
> intel_crtc_needs_fastset(new_crtc_state))
> - intel_crtc_update_active_timings(new_crtc_state,
> - new_crtc_state->vrr.enable);
> -
> local_irq_enable();
>
> if (intel_vgpu_active(dev_priv))
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> b/drivers/gpu/drm/i915/display/intel_display.c
> index cfad967b5684..632f1f58df9e 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -6476,6 +6476,8 @@ static void commit_pipe_post_planes(struct
> intel_atomic_state *state,
> struct intel_crtc *crtc)
> {
> struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> + const struct intel_crtc_state *old_crtc_state =
> + intel_atomic_get_old_crtc_state(state, crtc);
> const struct intel_crtc_state *new_crtc_state =
> intel_atomic_get_new_crtc_state(state, crtc);
>
> @@ -6487,6 +6489,9 @@ static void commit_pipe_post_planes(struct
> intel_atomic_state *state,
> if (DISPLAY_VER(dev_priv) >= 9 &&
> !intel_crtc_needs_modeset(new_crtc_state))
> skl_detach_scalers(new_crtc_state);
> +
> + if (vrr_enabling(old_crtc_state, new_crtc_state))
> + intel_vrr_enable(new_crtc_state);
> }
>
> static void intel_enable_crtc(struct intel_atomic_state *state, @@ -6527,12
> +6532,6 @@ static void intel_update_crtc(struct intel_atomic_state *state,
> intel_dpt_configure(crtc);
> }
>
> - if (vrr_enabling(old_crtc_state, new_crtc_state)) {
> - intel_vrr_enable(new_crtc_state);
> - intel_crtc_update_active_timings(new_crtc_state,
> - new_crtc_state->vrr.enable);
> - }
> -
> if (!modeset) {
> if (new_crtc_state->preload_luts &&
> intel_crtc_needs_color_update(new_crtc_state))
> @@ -6569,6 +6568,16 @@ static void intel_update_crtc(struct
> intel_atomic_state *state,
>
> intel_pipe_update_end(state, crtc);
>
> + /*
> + * VRR/Seamless M/N update may need to update frame timings.
> + *
> + * FIXME Should be synchronized with the start of vblank somehow...
> + */
> + if (vrr_enabling(old_crtc_state, new_crtc_state) ||
> + (new_crtc_state->seamless_m_n &&
> intel_crtc_needs_fastset(new_crtc_state)))
> + intel_crtc_update_active_timings(new_crtc_state,
> + new_crtc_state->vrr.enable);
> +
Change LGTM
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@xxxxxxxxx>
> /*
> * We usually enable FIFO underrun interrupts as part of the
> * CRTC enable sequence during modesets. But when we inherit a
> --
> 2.41.0
