> -----Original Message----- > From: Kandpal, Suraj <suraj.kandpal@xxxxxxxxx> > Sent: Wednesday, August 30, 2023 1:05 PM > To: intel-gfx@xxxxxxxxxxxxxxxxxxxxx > Cc: Nautiyal, Ankit K <ankit.k.nautiyal@xxxxxxxxx>; Shankar, Uma > <uma.shankar@xxxxxxxxx>; Murthy, Arun R <arun.r.murthy@xxxxxxxxx>; Kandpal, > Suraj <suraj.kandpal@xxxxxxxxx> > Subject: [PATCH 0/2] Fix HDCP2 capability check > > In DP MST scenarios we derive the connector and in turn the aux from > intel_digital_port which always gave the primary monitors aux, this caused the > capability of the primary monitor to be checked twice rather than enumerating the > different HDCP capabilities for each monitor because of this we saw the below > issues -primary monitor = HDCP 1.4 secondary monitor : HDCP 2.2 1.4 > i915_display_info reads as : HDCP 1.4 for both monitor > > -primary monitor = HDCP 2.2 1.4 secondary monitor : HDCP 1.4 i915_display_info > reads as : HDCP 2.2 1.4 for both monitor > > Solution is to derive the aux from intel_connector instead. Pushed to drm-intel-next. Thanks for the change. Regards, Uma Shankar > Signed-off-by: Suraj Kandpal <suraj.kandpal@xxxxxxxxx> > > Suraj Kandpal (2): > drm/i915/hdcp: Use intel_connector as argument for hdcp_2_2_capable > drm/i915/hdcp: Use correct aux for capability check scenario > > drivers/gpu/drm/i915/display/intel_display_types.h | 2 +- > drivers/gpu/drm/i915/display/intel_dp_hdcp.c | 7 +++++-- > drivers/gpu/drm/i915/display/intel_hdcp.c | 3 +-- > drivers/gpu/drm/i915/display/intel_hdmi.c | 3 ++- > 4 files changed, 9 insertions(+), 6 deletions(-) > > -- > 2.25.1
