Currently we can't change MBUS join status without doing a modeset,
because we are lacking mechanism to synchronize those with vblank.
However then this means that we can't do a fastset, if there is a need
to change MBUS join state. Fix that by implementing such change.
We already call correspondent check and update at pre_plane dbuf update,
so the only thing left is to have a non-modeset version of that.
If active pipes stay the same then fastset is possible and only MBUS
join state/ddb allocation updates would be committed.
v2: Implement additional changes according to BSpec.
Vblank wait is needed after MBus/Dbuf programming in case if
no modeset is done and we are switching from single to multiple
displays, i.e mbus join state switches from "joined" to "non-joined"
state. Otherwise vblank wait is not needed according to spec.
v3: Split mbus and dbox programming into to pre/post plane update parts,
how it should be done according to BSpec.
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@xxxxxxxxx>
Tested-by: Khaled Almahallawy <khaled.almahallawy@xxxxxxxxx>
---
drivers/gpu/drm/i915/display/intel_display.c | 2 --
drivers/gpu/drm/i915/display/skl_watermark.c | 36 +++++++++++++++-----
2 files changed, 27 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 8c81206ce90d7..249ba955cce2a 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -7041,9 +7041,7 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
}
intel_encoders_update_prepare(state);
-
intel_dbuf_pre_plane_update(state);
- intel_mbus_dbox_update(state);
for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
if (new_crtc_state->do_async_flip)
diff --git a/drivers/gpu/drm/i915/display/skl_watermark.c b/drivers/gpu/drm/i915/display/skl_watermark.c
index af99f2abd8446..b5c5fa9ecf43c 100644
--- a/drivers/gpu/drm/i915/display/skl_watermark.c
+++ b/drivers/gpu/drm/i915/display/skl_watermark.c
@@ -2614,13 +2614,6 @@ skl_compute_ddb(struct intel_atomic_state *state)
if (ret)
return ret;
- if (old_dbuf_state->joined_mbus != new_dbuf_state->joined_mbus) {
- /* TODO: Implement vblank synchronized MBUS joining changes */
- ret = intel_modeset_all_pipes(state, "MBUS joining change");
- if (ret)
- return ret;
- }
-
drm_dbg_kms(&i915->drm,
"Enabled dbuf slices 0x%x -> 0x%x (total dbuf slices 0x%x), mbus joined? %s->%s\n",
old_dbuf_state->enabled_slices,
@@ -3524,8 +3517,15 @@ void intel_dbuf_pre_plane_update(struct intel_atomic_state *state)
WARN_ON(!new_dbuf_state->base.changed);
- if (hweight8(new_dbuf_state->active_pipes) <= hweight8(old_dbuf_state->active_pipes))
+ /*
+ * Switching from multiple to single display scenario.
+ * Also we put here "<=" instead of "<" for suboptimal cases, when
+ * we switch from single => single display, enabling mbus join.
+ */
+ if (hweight8(new_dbuf_state->active_pipes) <= hweight8(old_dbuf_state->active_pipes)) {
intel_dbuf_mbus_update(state);
+ intel_mbus_dbox_update(state);
+ }
gen9_dbuf_slices_update(i915,
old_dbuf_state->enabled_slices |
@@ -3547,8 +3547,26 @@ void intel_dbuf_post_plane_update(struct intel_atomic_state *state)
WARN_ON(!new_dbuf_state->base.changed);
- if (hweight8(new_dbuf_state->active_pipes) > hweight8(old_dbuf_state->active_pipes))
+ /*
+ * Switching from single to multiple display scenario
+ */
+ if (hweight8(new_dbuf_state->active_pipes) > hweight8(old_dbuf_state->active_pipes)) {
+ struct intel_crtc *crtc;
+ struct intel_crtc_state *old_crtc_state;
+ int i;
intel_dbuf_mbus_update(state);
+ intel_mbus_dbox_update(state);
+
+ for_each_old_intel_crtc_in_state(state, crtc, old_crtc_state, i) {
+ /*
+ * According to BSpec we should wait vblank on previously single display
+ */
+ if (!old_crtc_state->hw.active)
+ continue;
+
+ intel_crtc_wait_for_next_vblank(crtc);
+ }
+ }
gen9_dbuf_slices_update(i915,
new_dbuf_state->enabled_slices);
--
2.37.3
